[PATCH 0/3] meson-gx: add pwm_AO_ab

[khilman@baylibre.com (Kevin Hilman)]

Martin Blumenstingl <martin.blumenstingl@googlemail.com> writes:

> This adds support for the PWM controller in the AO domain.

Patches 1,3 applied to Amlogic v4.11/dt64 branch.

Kevin

> pinctrl support for GXBB already exists (in both, pinctrl-meson-gxbb.c
> and meson-gxbb.dtsi). This patch adds at least the pwm_ao_b pin for
> GXL and GXM - these are not documented in Amlogic's kernel, so I had
> to borrow the magic numbers from the Khadas VIM kernel (released under
> the GPL): [0]
>
> The bits for pwm_AO_a_pins are unknown at the time of writing, but these
> can still be added later.
>
> I have successfully tested this on my GXL S905X based Khadas VIM board
> with the following .dts snippets (the PWM LED can simply be dimmed
> through sysfs):
> 	&pwm_AO_ab {
> 		status = "okay";
> 		pinctrl-0 = <&pwm_ao_b_pins>;
> 		pinctrl-names = "default";
> 		clocks = <&clkc CLKID_FCLK_DIV4>;
> 		clock-names = "clkin0";
> 	};
>
> 	pwmleds {
> 		compatible = "pwm-leds";
>
> 		power {
> 			label = "vim:red:power";
> 			pwms = <&pwm_AO_ab 1 7812500 0>;
> 			max-brightness = <255>;
> 		};
> 	};
>
> (if anyone is interested in more of my Khadas VIM patches - these are
> still work-in-progress, which is why I have not sent them yet - can
> take a look at this: [1])
>
> NOTE: The .dts changes from this series are based on top of my SAR ADC
> patches.
>
> [0] https://github.com/khadas/linux/blob/94602ef5562978a8d8b5c7770c113074a714dbdb/drivers/amlogic/led/led_trigger_breathe.c#L75
> [1] https://github.com/xdarklight/linux/commits/meson-gx-integration-4.11-20170122
>
> Martin Blumenstingl (3):
>   ARM64: dts: meson-gx: add the missing pwm_AO_ab node
>   pinctrl: meson: meson-gxl: add the pwm_ao_b pin
>   ARM64: dts: meson-gxl: add the pwm_ao_b pin
>
>  arch/arm64/boot/dts/amlogic/meson-gx.dtsi  | 7 +++++++
>  arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 7 +++++++
>  drivers/pinctrl/meson/pinctrl-meson-gxl.c  | 8 ++++++++
>  3 files changed, 22 insertions(+)