From: khilman@baylibre.com (Kevin Hilman)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] ARM: dts: da850: Add missing pin muxing for the UARTs
Date: Thu, 04 Aug 2016 16:00:35 -0700 [thread overview]
Message-ID: <m2fuqknnqk.fsf@baylibre.com> (raw)
In-Reply-To: <20160804210045.GD15013@gobelin> (Karl Beldan's message of "Thu, 4 Aug 2016 21:00:45 +0000")
Karl Beldan <kbeldan@baylibre.com> writes:
> On Thu, Aug 04, 2016 at 12:20:27PM -0700, Kevin Hilman wrote:
>> Karl Beldan <kbeldan@baylibre.com> writes:
>>
>> > This adds 2 pinctrl groups (rtscts, rxtx) for each of the 3 UARTs.
>> >
>> > Signed-off-by: Karl Beldan <kbeldan@baylibre.com>
>>
>> Should da850-evm be updated to use the serial2_rxtx_pins also?
>>
> I could not find the EVM schematics on the net and I only have an LCDK,
> but according to the code it should, however I can't tell whether flow
> control pins are used.
Ok, let's just leave it for now, since it's working fine. Sekhar can
fix that up if he can dig up the schematics.
Kevin
WARNING: multiple messages have this Message-ID (diff)
From: Kevin Hilman <khilman-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
To: Karl Beldan <kbeldan-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
Cc: Sekhar Nori <nsekhar-l0cyMroinI0@public.gmane.org>,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
Russell King <linux-I+IVW8TIWO2tmTQ+vhA3Yw@public.gmane.org>,
karl.beldan+oss-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org
Subject: Re: [PATCH] ARM: dts: da850: Add missing pin muxing for the UARTs
Date: Thu, 04 Aug 2016 16:00:35 -0700 [thread overview]
Message-ID: <m2fuqknnqk.fsf@baylibre.com> (raw)
In-Reply-To: <20160804210045.GD15013@gobelin> (Karl Beldan's message of "Thu, 4 Aug 2016 21:00:45 +0000")
Karl Beldan <kbeldan-rdvid1DuHRBWk0Htik3J/w@public.gmane.org> writes:
> On Thu, Aug 04, 2016 at 12:20:27PM -0700, Kevin Hilman wrote:
>> Karl Beldan <kbeldan-rdvid1DuHRBWk0Htik3J/w@public.gmane.org> writes:
>>
>> > This adds 2 pinctrl groups (rtscts, rxtx) for each of the 3 UARTs.
>> >
>> > Signed-off-by: Karl Beldan <kbeldan-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>
>>
>> Should da850-evm be updated to use the serial2_rxtx_pins also?
>>
> I could not find the EVM schematics on the net and I only have an LCDK,
> but according to the code it should, however I can't tell whether flow
> control pins are used.
Ok, let's just leave it for now, since it's working fine. Sekhar can
fix that up if he can dig up the schematics.
Kevin
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2016-08-04 23:00 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-08-04 11:06 [PATCH] ARM: dts: da850: Add missing pin muxing for the UARTs Karl Beldan
2016-08-04 11:06 ` Karl Beldan
2016-08-04 19:04 ` Kevin Hilman
2016-08-04 19:04 ` Kevin Hilman
2016-08-04 19:20 ` Kevin Hilman
2016-08-04 19:20 ` Kevin Hilman
2016-08-04 19:40 ` Karl Beldan
2016-08-04 21:00 ` Karl Beldan
2016-08-04 21:00 ` Karl Beldan
2016-08-04 23:00 ` Kevin Hilman [this message]
2016-08-04 23:00 ` Kevin Hilman
2016-08-23 11:09 ` Sekhar Nori
2016-08-23 11:09 ` Sekhar Nori
2016-08-23 11:16 ` Sekhar Nori
2016-08-23 11:16 ` Sekhar Nori
2016-08-24 8:38 ` Karl Beldan
2016-08-24 8:38 ` Karl Beldan
2016-08-25 13:42 ` Sekhar Nori
2016-08-25 13:42 ` Sekhar Nori
2016-08-25 14:15 ` Karl Beldan
2016-08-25 14:15 ` Karl Beldan
2016-08-26 11:42 ` Sekhar Nori
2016-08-26 11:42 ` Sekhar Nori
2016-08-26 12:25 ` Sekhar Nori
2016-08-26 12:25 ` Sekhar Nori
2016-08-26 17:17 ` Karl Beldan
2016-08-26 17:17 ` Karl Beldan
2016-08-30 8:54 ` Sekhar Nori
2016-08-30 8:54 ` Sekhar Nori
2016-08-09 10:19 ` Sekhar Nori
2016-08-09 10:19 ` Sekhar Nori
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=m2fuqknnqk.fsf@baylibre.com \
--to=khilman@baylibre.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.