All of lore.kernel.org
 help / color / mirror / Atom feed
* [linux-lvm] Q: allocation of PEs to LVs
@ 2002-02-04  7:15 Urs Thuermann
  2002-02-04  8:11 ` Heinz J . Mauelshagen
  0 siblings, 1 reply; 3+ messages in thread
From: Urs Thuermann @ 2002-02-04  7:15 UTC (permalink / raw)
  To: linux-lvm

How are PEs allocated when LVs are created using lvcreate?  I created
a LV unsing lvcreate from LVM-1.0.1 on an empty VG and was surprised
that PEs are allocated starting with PE 1 and not PE 0 as I expected:

    isnogud:root# pvcreate /dev/sdd1
    pvcreate -- physical volume "/dev/sdd1" successfully created
    
    isnogud:root# vgcreate vg1 /dev/sdd1
    vgcreate -- INFO: using default physical extent size 4.00 MB
    vgcreate -- INFO: maximum logical volume size is 255.99 Gigabyte
    vgcreate -- doing automatic backup of volume group "vg1"
    vgcreate -- volume group "vg1" successfully created and activated
    
    isnogud:root# lvcreate -n test vg1 -L32M
    lvcreate -- doing automatic backup of "vg1"
    lvcreate -- logical volume "/dev/vg1/test" successfully created
    
    isnogud:root# lvdisplay -v /dev/vg1/test
    --- Logical volume ---
    LV Name                /dev/vg1/test
    VG Name                vg1
    LV Write Access        read/write
    LV Status              available
    LV #                   1
    # open                 0
    LV Size                32.00 MB
    Current LE             8
    Allocated LE           8
    Allocation             next free
    Read ahead sectors     10000
    Block device           58:11
    
       --- Distribution of logical volume on 1 physical volume  ---
       PV Name                  PE on PV     reads      writes
       /dev/sdd1                8            0          4        
    
       --- logical volume i/o statistic ---
       0 reads  4 writes
    
       --- Logical extents ---
       LE    PV                        PE     reads      writes
       00000 /dev/sdd1                 00001  0          4        
       00001 /dev/sdd1                 00002  0          0        
       00002 /dev/sdd1                 00003  0          0        
       00003 /dev/sdd1                 00004  0          0        
       00004 /dev/sdd1                 00005  0          0        
       00005 /dev/sdd1                 00006  0          0        
       00006 /dev/sdd1                 00007  0          0        
       00007 /dev/sdd1                 00008  0          0        
    
    
    isnogud:root# 


The first LV in my other VG starts at PE 0 as expected.  I created
that VG and LVs using vgcreate and lvcreate from LVM-0.9.1_beta7:

    isnogud:root# lvdisplay -v /dev/vg0/root
    --- Logical volume ---
    LV Name                /dev/vg0/root
    VG Name                vg0
    LV Write Access        read/write
    LV Status              available
    LV #                   1
    # open                 1
    LV Size                128.00 MB
    Current LE             32
    Allocated LE           32
    Stripes                2
    Stripe size (KByte)    4
    Allocation             next free
    Read ahead sectors     120
    Block device           58:0
    
       --- Distribution of logical volume on 2 physical volumes  ---
       PV Name                  PE on PV     reads      writes
       /dev/sda2                16           41814      100298   
       /dev/sdb2                16           42184      161941   
    
       --- logical volume i/o statistic ---
       83998 reads  262239 writes
    
       --- Logical extents ---
       LE    PV                        PE     reads      writes
       00000 /dev/sda2                 00000  2814       663      
       00001 /dev/sda2                 00001  978        24114    
       ...
       00014 /dev/sda2                 00014  1955       223      
       00015 /dev/sda2                 00015  4050       277      
       00016 /dev/sdb2                 00000  2835       634      
       00017 /dev/sdb2                 00001  946        72276    
       ...
       00030 /dev/sdb2                 00014  1984       205      
       00031 /dev/sdb2                 00015  4083       311      
    
    
    isnogud:root# 


Can someone explain this, please?  Is it intentional?


Also, the "Read ahead sectors" seem to have changed from 120 to 10000,
which seems quite a lot to me.  10000 sectors is roughly 5 MB.  Does
every read really cause the next 5 MB to be read from the disk(s)?


urs

^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: [linux-lvm] Q: allocation of PEs to LVs
  2002-02-04  7:15 [linux-lvm] Q: allocation of PEs to LVs Urs Thuermann
@ 2002-02-04  8:11 ` Heinz J . Mauelshagen
  2002-02-20  4:00   ` Urs Thuermann
  0 siblings, 1 reply; 3+ messages in thread
From: Heinz J . Mauelshagen @ 2002-02-04  8:11 UTC (permalink / raw)
  To: linux-lvm

Urs,

that is a display related bug.
Thanks for pointing this out.

Please try the following patch:
diff -u -B -r1.3.2.9 lv_show.c
--- LVM/tools/lib/lv_show.c     12 Mar 2001 16:21:21 -0000      1.3.2.9
+++ LVM/tools/lib/lv_show.c     4 Feb 2002 14:07:34 -0000
@@ -327,16 +327,18 @@
             "   LE    PV                        PE     reads      writes\n");
    dev = 0;
    for ( pe = 0; pe < lv->lv_allocated_le; pe++) {
+      int pv_index;
+
       if ( lv->lv_current_pe[pe].dev != dev) {
          pv_name = pv_create_name_from_kdev_t ( lv->lv_current_pe[pe].dev);
          dev = lv->lv_current_pe[pe].dev;
       }
+      pv_index = pv_get_index_by_kdev_t ( vg, lv->lv_current_pe[pe].dev);
       printf ( "   %05d %-25s %05u  %-9u  %-9u\n",
                pe,
                pv_name,
                ( lv->lv_current_pe[pe].pe -
-                 vg->pv[pv_get_index_by_kdev_t
-                        ( vg, lv->lv_current_pe[pe].dev)]->pe_on_disk.base /
+                 LVM_VGDA_SIZE(vg->pv[pv_index]) /
                  SECTOR_SIZE) /
                  ( lv->lv_size / lv->lv_allocated_le),
                  lv->lv_current_pe[pe].reads,


Regards,
Heinz    -- The LVM Guy --


On Mon, Feb 04, 2002 at 02:13:27PM +0100, Urs Thuermann wrote:
> How are PEs allocated when LVs are created using lvcreate?  I created
> a LV unsing lvcreate from LVM-1.0.1 on an empty VG and was surprised
> that PEs are allocated starting with PE 1 and not PE 0 as I expected:
> 
>     isnogud:root# pvcreate /dev/sdd1
>     pvcreate -- physical volume "/dev/sdd1" successfully created
>     
>     isnogud:root# vgcreate vg1 /dev/sdd1
>     vgcreate -- INFO: using default physical extent size 4.00 MB
>     vgcreate -- INFO: maximum logical volume size is 255.99 Gigabyte
>     vgcreate -- doing automatic backup of volume group "vg1"
>     vgcreate -- volume group "vg1" successfully created and activated
>     
>     isnogud:root# lvcreate -n test vg1 -L32M
>     lvcreate -- doing automatic backup of "vg1"
>     lvcreate -- logical volume "/dev/vg1/test" successfully created
>     
>     isnogud:root# lvdisplay -v /dev/vg1/test
>     --- Logical volume ---
>     LV Name                /dev/vg1/test
>     VG Name                vg1
>     LV Write Access        read/write
>     LV Status              available
>     LV #                   1
>     # open                 0
>     LV Size                32.00 MB
>     Current LE             8
>     Allocated LE           8
>     Allocation             next free
>     Read ahead sectors     10000
>     Block device           58:11
>     
>        --- Distribution of logical volume on 1 physical volume  ---
>        PV Name                  PE on PV     reads      writes
>        /dev/sdd1                8            0          4        
>     
>        --- logical volume i/o statistic ---
>        0 reads  4 writes
>     
>        --- Logical extents ---
>        LE    PV                        PE     reads      writes
>        00000 /dev/sdd1                 00001  0          4        
>        00001 /dev/sdd1                 00002  0          0        
>        00002 /dev/sdd1                 00003  0          0        
>        00003 /dev/sdd1                 00004  0          0        
>        00004 /dev/sdd1                 00005  0          0        
>        00005 /dev/sdd1                 00006  0          0        
>        00006 /dev/sdd1                 00007  0          0        
>        00007 /dev/sdd1                 00008  0          0        
>     
>     
>     isnogud:root# 
> 
> 
> The first LV in my other VG starts at PE 0 as expected.  I created
> that VG and LVs using vgcreate and lvcreate from LVM-0.9.1_beta7:
> 
>     isnogud:root# lvdisplay -v /dev/vg0/root
>     --- Logical volume ---
>     LV Name                /dev/vg0/root
>     VG Name                vg0
>     LV Write Access        read/write
>     LV Status              available
>     LV #                   1
>     # open                 1
>     LV Size                128.00 MB
>     Current LE             32
>     Allocated LE           32
>     Stripes                2
>     Stripe size (KByte)    4
>     Allocation             next free
>     Read ahead sectors     120
>     Block device           58:0
>     
>        --- Distribution of logical volume on 2 physical volumes  ---
>        PV Name                  PE on PV     reads      writes
>        /dev/sda2                16           41814      100298   
>        /dev/sdb2                16           42184      161941   
>     
>        --- logical volume i/o statistic ---
>        83998 reads  262239 writes
>     
>        --- Logical extents ---
>        LE    PV                        PE     reads      writes
>        00000 /dev/sda2                 00000  2814       663      
>        00001 /dev/sda2                 00001  978        24114    
>        ...
>        00014 /dev/sda2                 00014  1955       223      
>        00015 /dev/sda2                 00015  4050       277      
>        00016 /dev/sdb2                 00000  2835       634      
>        00017 /dev/sdb2                 00001  946        72276    
>        ...
>        00030 /dev/sdb2                 00014  1984       205      
>        00031 /dev/sdb2                 00015  4083       311      
>     
>     
>     isnogud:root# 
> 
> 
> Can someone explain this, please?  Is it intentional?
> 
> 
> Also, the "Read ahead sectors" seem to have changed from 120 to 10000,
> which seems quite a lot to me.  10000 sectors is roughly 5 MB.  Does
> every read really cause the next 5 MB to be read from the disk(s)?
> 
> 
> urs
> 
> _______________________________________________
> linux-lvm mailing list
> linux-lvm@sistina.com
> http://lists.sistina.com/mailman/listinfo/linux-lvm
> read the LVM HOW-TO at http://www.sistina.com/lvm/Pages/howto.html

*** Software bugs are stupid.
    Nevertheless it needs not so stupid people to solve them ***

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-

Heinz Mauelshagen                                 Sistina Software Inc.
Senior Consultant/Developer                       Am Sonnenhang 11
                                                  56242 Marienrachdorf
                                                  Germany
Mauelshagen@Sistina.com                           +49 2626 141200
                                                       FAX 924446
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-

^ permalink raw reply	[flat|nested] 3+ messages in thread

* Re: [linux-lvm] Q: allocation of PEs to LVs
  2002-02-04  8:11 ` Heinz J . Mauelshagen
@ 2002-02-20  4:00   ` Urs Thuermann
  0 siblings, 0 replies; 3+ messages in thread
From: Urs Thuermann @ 2002-02-20  4:00 UTC (permalink / raw)
  To: linux-lvm

"Heinz J . Mauelshagen" <mauelshagen@sistina.com> writes:

> that is a display related bug.
> Thanks for pointing this out.

Yes, that patch did fix the display bug.  Thanx.


urs

^ permalink raw reply	[flat|nested] 3+ messages in thread

end of thread, other threads:[~2002-02-20  4:00 UTC | newest]

Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2002-02-04  7:15 [linux-lvm] Q: allocation of PEs to LVs Urs Thuermann
2002-02-04  8:11 ` Heinz J . Mauelshagen
2002-02-20  4:00   ` Urs Thuermann

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.