All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Krzysztof Hałasa" <khalasa@piap.pl>
To: Dafna Hirschfeld <dafna@fastmail.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
	Mauro Carvalho Chehab <mchehab@kernel.org>,
	Heiko Stuebner <heiko@sntech.de>,
	linux-media@vger.kernel.org, linux-rockchip@lists.infradead.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org,
	Jacopo Mondi <jacopo.mondi@ideasonboard.com>,
	Paul Elder <paul.elder@ideasonboard.com>,
	Ondrej Jirman <megi@xff.cz>,
	Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Subject: [PATCH] media: rkisp1: correct histogram window size
Date: Fri, 23 May 2025 11:10:47 +0200	[thread overview]
Message-ID: <m3tt5b7kvc.fsf@t19.piap.pl> (raw)

Without the patch (i.MX8MP, all-white RGGB-12 full HD input from
the sensor, YUV NV12 output from ISP, full range, histogram Y mode).
HIST_STEPSIZE = 3 (lowest permitted), all weights are set to 1:

isp_hist_h_size: 383 (= 1920 / 5 - 1)
isp_hist_v_size: 215 (= 1080 / 5 - 1)
histogram_measurement_result[16]: 0 0 0 0  0 0 0 0  0 0 0 0  0 0 0 229401

Apparently the histogram is missing the last column (3-pixel wide,
though only single pixels count) and the last (same idea) row
of the input image: 1917 * 1077 / 3 / 3 = 229401.

E.g. without the patch, the pixels counted in lines are:
0, 3, ... 1914 (which makes 1917/3), and patched:
0, 3, ... 1914, 1917 (which makes 1920/3).
The same is true for rows.

With the patch applied:
isp_hist_h_size: 384 (= 1920 / 5)
isp_hist_v_size: 216 (= 1080 / 5)
histogram_measurement_result[16]: 0 0 0 0  0 0 0 0  0 0 0 0  0 0 0 230400

1920 * 1080 / 3 / 3 = 230400

Signed-off-by: Krzysztof Hałasa <khalasa@piap.pl>

diff --git a/drivers/media/platform/rockchip/rkisp1/rkisp1-params.c b/drivers/media/platform/rockchip/rkisp1/rkisp1-params.c
index b28f4140c8a3..ca9b3e711e5f 100644
--- a/drivers/media/platform/rockchip/rkisp1/rkisp1-params.c
+++ b/drivers/media/platform/rockchip/rkisp1/rkisp1-params.c
@@ -819,8 +819,8 @@ static void rkisp1_hst_config_v10(struct rkisp1_params *params,
 		     arg->meas_window.v_offs);
 
 	block_hsize = arg->meas_window.h_size /
-		      RKISP1_CIF_ISP_HIST_COLUMN_NUM_V10 - 1;
-	block_vsize = arg->meas_window.v_size / RKISP1_CIF_ISP_HIST_ROW_NUM_V10 - 1;
+		      RKISP1_CIF_ISP_HIST_COLUMN_NUM_V10;
+	block_vsize = arg->meas_window.v_size / RKISP1_CIF_ISP_HIST_ROW_NUM_V10;
 
 	rkisp1_write(params->rkisp1, RKISP1_CIF_ISP_HIST_H_SIZE_V10,
 		     block_hsize);

-- 
Krzysztof "Chris" Hałasa

Sieć Badawcza Łukasiewicz
Przemysłowy Instytut Automatyki i Pomiarów PIAP
Al. Jerozolimskie 202, 02-486 Warszawa


WARNING: multiple messages have this Message-ID (diff)
From: "Krzysztof Hałasa" <khalasa@piap.pl>
To: Dafna Hirschfeld <dafna@fastmail.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
	Mauro Carvalho Chehab <mchehab@kernel.org>,
	Heiko Stuebner <heiko@sntech.de>,
	linux-media@vger.kernel.org, linux-rockchip@lists.infradead.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org,
	Jacopo Mondi <jacopo.mondi@ideasonboard.com>,
	Paul Elder <paul.elder@ideasonboard.com>,
	Ondrej Jirman <megi@xff.cz>,
	Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Subject: [PATCH] media: rkisp1: correct histogram window size
Date: Fri, 23 May 2025 11:10:47 +0200	[thread overview]
Message-ID: <m3tt5b7kvc.fsf@t19.piap.pl> (raw)

Without the patch (i.MX8MP, all-white RGGB-12 full HD input from
the sensor, YUV NV12 output from ISP, full range, histogram Y mode).
HIST_STEPSIZE = 3 (lowest permitted), all weights are set to 1:

isp_hist_h_size: 383 (= 1920 / 5 - 1)
isp_hist_v_size: 215 (= 1080 / 5 - 1)
histogram_measurement_result[16]: 0 0 0 0  0 0 0 0  0 0 0 0  0 0 0 229401

Apparently the histogram is missing the last column (3-pixel wide,
though only single pixels count) and the last (same idea) row
of the input image: 1917 * 1077 / 3 / 3 = 229401.

E.g. without the patch, the pixels counted in lines are:
0, 3, ... 1914 (which makes 1917/3), and patched:
0, 3, ... 1914, 1917 (which makes 1920/3).
The same is true for rows.

With the patch applied:
isp_hist_h_size: 384 (= 1920 / 5)
isp_hist_v_size: 216 (= 1080 / 5)
histogram_measurement_result[16]: 0 0 0 0  0 0 0 0  0 0 0 0  0 0 0 230400

1920 * 1080 / 3 / 3 = 230400

Signed-off-by: Krzysztof Hałasa <khalasa@piap.pl>

diff --git a/drivers/media/platform/rockchip/rkisp1/rkisp1-params.c b/drivers/media/platform/rockchip/rkisp1/rkisp1-params.c
index b28f4140c8a3..ca9b3e711e5f 100644
--- a/drivers/media/platform/rockchip/rkisp1/rkisp1-params.c
+++ b/drivers/media/platform/rockchip/rkisp1/rkisp1-params.c
@@ -819,8 +819,8 @@ static void rkisp1_hst_config_v10(struct rkisp1_params *params,
 		     arg->meas_window.v_offs);
 
 	block_hsize = arg->meas_window.h_size /
-		      RKISP1_CIF_ISP_HIST_COLUMN_NUM_V10 - 1;
-	block_vsize = arg->meas_window.v_size / RKISP1_CIF_ISP_HIST_ROW_NUM_V10 - 1;
+		      RKISP1_CIF_ISP_HIST_COLUMN_NUM_V10;
+	block_vsize = arg->meas_window.v_size / RKISP1_CIF_ISP_HIST_ROW_NUM_V10;
 
 	rkisp1_write(params->rkisp1, RKISP1_CIF_ISP_HIST_H_SIZE_V10,
 		     block_hsize);

-- 
Krzysztof "Chris" Hałasa

Sieć Badawcza Łukasiewicz
Przemysłowy Instytut Automatyki i Pomiarów PIAP
Al. Jerozolimskie 202, 02-486 Warszawa

_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip

             reply	other threads:[~2025-05-23  9:15 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-05-23  9:10 Krzysztof Hałasa [this message]
2025-05-23  9:10 ` [PATCH] media: rkisp1: correct histogram window size Krzysztof Hałasa
2025-05-23 11:05 ` Paul Elder
2025-05-23 11:05   ` Paul Elder
  -- strict thread matches above, loose matches on Subject: below --
2025-05-29  9:29 Krzysztof Hałasa
2025-05-29  9:29 ` Krzysztof Hałasa

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=m3tt5b7kvc.fsf@t19.piap.pl \
    --to=khalasa@piap.pl \
    --cc=dafna@fastmail.com \
    --cc=heiko@sntech.de \
    --cc=jacopo.mondi@ideasonboard.com \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=linux-rockchip@lists.infradead.org \
    --cc=mchehab@kernel.org \
    --cc=megi@xff.cz \
    --cc=paul.elder@ideasonboard.com \
    --cc=tomi.valkeinen@ideasonboard.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.