* [LARTC] building linux router with QoS what about performance
@ 2001-10-01 13:41 Thomas Kirk
0 siblings, 0 replies; only message in thread
From: Thomas Kirk @ 2001-10-01 13:41 UTC (permalink / raw)
To: lartc
Hey Listmembers
Im currently looking into building a linuxrouter which has one
purpose. To divide bandwidth to networks. The setup will look like
this :
Cisco 7120/oc3/100mbit--eth0--eth1,2,3,4 etc etc
Im planning to use CBQ to divide bandwidth against the diffrent
network. Right now im trying to figure out what the hardware
requirments would be and how scaleable this solution will be? Have
anyone on this list tried to doing something equal this setup or have
experince with QoS on high bandwidth links?
Thanks in advance
--
Venlig hilsen/Kind regards
Thomas Kirk
ARKENA
thomas@arkena.com
Http://www.arkena.com
"[In 'Doctor' mode], I spent a good ten minutes telling Emacs what I
thought of it. (The response was, 'Perhaps you could try to be less
abusive.')"
(By Matt Welsh)
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2001-10-01 13:41 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2001-10-01 13:41 [LARTC] building linux router with QoS what about performance Thomas Kirk
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.