[LARTC] Re: burst / minburst, etc.

[LARTC] Re: burst / minburst, etc.

[Michael T. Babcock]

On Thu, Dec 06, 2001 at 08:48:11PM +0100, bert hubert wrote:
> > tc class add dev eth0 parent 1: classid 1:1 htb rate 20Mbit burst 4kB
> > tc qdisc add dev eth0 parent 1:1 sfq
> 
> Raise burst, for 20Mbit it needs to be at least 20kbyte!

Is there any good documentation on setting minburst/maxburst on CBQ as
well as burst rates for other queuing disciplines as mentioned above?
-- 
Michael T. Babcock
CTO, FibreSpeed Ltd.     (Hosting, Security, Consultation, Database, etc)
http://www.fibrespeed.net/~mbabcock/

_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/

Re: [LARTC] Re: burst / minburst, etc.

[bert hubert]

On Thu, Dec 06, 2001 at 02:59:40PM -0500, Michael T. Babcock wrote:
> On Thu, Dec 06, 2001 at 08:48:11PM +0100, bert hubert wrote:
> > > tc class add dev eth0 parent 1: classid 1:1 htb rate 20Mbit burst 4kB
> > > tc qdisc add dev eth0 parent 1:1 sfq
> > 
> > Raise burst, for 20Mbit it needs to be at least 20kbyte!
> 
> Is there any good documentation on setting minburst/maxburst on CBQ as
> well as burst rates for other queuing disciplines as mentioned above?

HTB is implemented on its own page, and mentions the bucket sizes needed.
CBQ is only documented on http://ds9a.nl/lartc ... (it also mentions
minburst).

Regards,

bert

-- 
http://www.PowerDNS.com          Versatile DNS Software & Services
Trilab                                 The Technology People
Netherlabs BV / Rent-a-Nerd.nl           - Nerd Available -
'SYN! .. SYN|ACK! .. ACK!' - the mating call of the internet

_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/