* Re: Re[2]: [LARTC] problems with IMQ + Netfilter IP_LIMIT patch from
@ 2002-02-15 20:49 Martin Devera
0 siblings, 0 replies; only message in thread
From: Martin Devera @ 2002-02-15 20:49 UTC (permalink / raw)
To: lartc
> Wipld (traffic monitor tool )don't show any information on eth0/1, ntop
> neigther.
> Also i attemp to configure both programs tu get imq information:
> # ntop -i imq
> ntop: listening on imq
> ntop: unknown physical layer type 0xffff
you can't use imq for anything else than as qdisc placeholder.
There is nothing what should prevent you from looking at interface.
I don't know ntop nor wipld so I don't know what could be wrong.
You have to look into it and tell me whether the problem is with
packet sniffing (try tcpdump on ethX) or with cat /proc/net/dev
devik
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/lartc/
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2002-02-15 20:49 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2002-02-15 20:49 Re[2]: [LARTC] problems with IMQ + Netfilter IP_LIMIT patch from Martin Devera
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.