[LARTC] Beginner "prio" question...

[LARTC] Beginner "prio" question...

[eth]

I keep reading through documentation an I don't really get it:

If I set a prio qdisc on an interface like this:

tc qdisc del dev eth0 root
tc qdisc add dev eth0 root handle 10: prio


... and I don't set any tc filters, all the traffic goes in bands 1, 2 
or 3 based on the TOS field?

_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

Re: [LARTC] Beginner "prio" question...

[bert hubert]

On Tue, Mar 05, 2002 at 12:23:09PM +0200, eth wrote:
> 
> I keep reading through documentation an I don't really get it:
> 
> If I set a prio qdisc on an interface like this:
> 
> tc qdisc del dev eth0 root
> tc qdisc add dev eth0 root handle 10: prio
> 
> ... and I don't set any tc filters, all the traffic goes in bands 1, 2 
> or 3 based on the TOS field?

Yes. This is explained at length on http://lartc.org and on
http://lartc.org/manpages

Regards,

bert

-- 
http://www.PowerDNS.com          Versatile DNS Software & Services
http://www.tk                              the dot in .tk
http://lartc.org           Linux Advanced Routing & Traffic Control HOWTO
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/