[LARTC] Problem with 2 DSL lines

[LARTC] Problem with 2 DSL lines

[tslayer]

Hey..

I have 2 DSL lines both going into Linux.

I followed the HOWTO for Split Access at
http://lartc.org/HOWTO//cvs/2.4routing/html/x247.html#AEN251

I have the following:


I have 5 IPs on eth0 for DSL line #1.
I have 1 IP on eth2 for DSL line #2.


192.168.0.0/24 is my local lan.  I have iptables setup to SNAT to eth2 for
this local lan.

Everything seems to work great except if I want to access any of the IPs
on eth0 from the local lan.  I do a traceroute and it just hangs on the
1st hop.


The default is via the gateway of DSL line #2.

Any ideas?

Thanks...




_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

Re: [LARTC] Problem with 2 DSL lines

[tslayer]

I'd like to add to this.

From the local lan, I can't access either of the external interfaces(DSL
#1, or DSL #2).

Thanks,

Eric


On Fri, 26 Apr 2002 tslayer@phatchicks.com wrote:

> Hey..
>
> I have 2 DSL lines both going into Linux.
>
> I followed the HOWTO for Split Access at
> http://lartc.org/HOWTO//cvs/2.4routing/html/x247.html#AEN251
>
> I have the following:
>
>
> I have 5 IPs on eth0 for DSL line #1.
> I have 1 IP on eth2 for DSL line #2.
>
>
> 192.168.0.0/24 is my local lan.  I have iptables setup to SNAT to eth2 for
> this local lan.
>
> Everything seems to work great except if I want to access any of the IPs
> on eth0 from the local lan.  I do a traceroute and it just hangs on the
> 1st hop.
>
>
> The default is via the gateway of DSL line #2.
>
> Any ideas?
>
> Thanks...
>
>
>
>
> _______________________________________________
> LARTC mailing list / LARTC@mailman.ds9a.nl
> http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
>

_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

Re: [LARTC] Problem with 2 DSL lines

[tslayer]

I am going to answer with the solution to this.

I actually followed http://www.linuxvirtualserver.org/~julian/nano.txt
(Thanks Julian) and now everything works great.

Well almost, can't actually hit the server with 192.168.0.1(Internal iface
ip of linux box) but that is fine with me.

Maybe the HOWTO on lartc.org for split access should be updated?

Thanks again,

Eric


On Sun, 28 Apr 2002 tslayer@phatchicks.com wrote:

> I'd like to add to this.
>
> >From the local lan, I can't access either of the external interfaces(DSL
> #1, or DSL #2).
>
> Thanks,
>
> Eric
>
>
> On Fri, 26 Apr 2002 tslayer@phatchicks.com wrote:
>
> > Hey..
> >
> > I have 2 DSL lines both going into Linux.
> >
> > I followed the HOWTO for Split Access at
> > http://lartc.org/HOWTO//cvs/2.4routing/html/x247.html#AEN251
> >
> > I have the following:
> >
> >
> > I have 5 IPs on eth0 for DSL line #1.
> > I have 1 IP on eth2 for DSL line #2.
> >
> >
> > 192.168.0.0/24 is my local lan.  I have iptables setup to SNAT to eth2 for
> > this local lan.
> >
> > Everything seems to work great except if I want to access any of the IPs
> > on eth0 from the local lan.  I do a traceroute and it just hangs on the
> > 1st hop.
> >
> >
> > The default is via the gateway of DSL line #2.
> >
> > Any ideas?
> >
> > Thanks...
> >
> >
> >
> >
> > _______________________________________________
> > LARTC mailing list / LARTC@mailman.ds9a.nl
> > http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
> >
>
> _______________________________________________
> LARTC mailing list / LARTC@mailman.ds9a.nl
> http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
>

_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/