[LARTC] newbie to shapin'

[LARTC] newbie to shapin'

[mdew]

[-- Attachment #1: Type: text/plain, Size: 877 bytes --]

ok, we're about to move to a small (256k) wireless internet setup,...we
have been warned not to do large amount of traffic...Basically we're
investing into a small linux-b0x ..that would act as a router and
shaper.

Basically I would like to limit uploads from a certain port (4000) and
possibly limit downloads from that port aswell... Using Linux (2.4.x)
setup.. Limit port 4000 to 2k upload/15k download (for example)

Router "192.168.0.1" -> Which sends traffic to all 3 pc's.
Computer A "10.0.0.1"	Windows w2k
Computer B "10.0.0.2"	Windows w2k
Computer C "10.0.0.3"	Linux 2.4 (this b0x)

Ive read the docs, and found it pretty confusing...so many ways to do
things... whats the best way to do this.? some examples please :)

-- 
ph33r!
Linux mdew 2.4.19-pre8-xfs-aa #3 Thu May 16 20:37:56 NZST 2002 i686
unknown
GPG Key: http://mdew.orcon.net.nz/gpg

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 189 bytes --]

Re: [LARTC] newbie to shapin'

[Chris K Ellsworth]

first thing to remember is to limit on the outgoing network card and 2nd
look into either HTB or CBQ under TC.
also check out
www.docum.org

----- Original Message -----
From: "mdew" <mdew@orcon.net.nz>
To: "lartc" <lartc@mailman.ds9a.nl>
Sent: Wednesday, May 29, 2002 10:47 PM
Subject: [LARTC] newbie to shapin'




_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/