All of lore.kernel.org
 help / color / mirror / Atom feed
From: "M.F. PSIkappa" <psi@platon.atlantis.sk>
To: lartc@vger.kernel.org
Subject: Re: [LARTC] non-ethernet devices and QoS ?
Date: Sat, 10 Aug 2002 12:45:29 +0000	[thread overview]
Message-ID: <marc-lartc-102898359711513@msgid-missing> (raw)
In-Reply-To: <marc-lartc-102892180005436@msgid-missing>

Hi,
if I known there is no problem with QoS on Synchronnous card. The devices
are hdlc0, hdlc1...
BUT frame-relay use own tools for QoS on provider side, it's known as
signaling. You will have problem e.g. with latency because frame-relay have
own strategy with prioritization of traffic.
For more read www.frforum.com

On Fri, 9 Aug 2002 raptor@unacs.bg wrote:

> hi,
>
> I'm just evaluating to use Cyclades PC300 card instead of a Cisco router...
> and 'cause I have never used such boards so I wanted to know will I be
> able to do egress shaping on this board ?
> (It should be connected to the ISP with FrameRelay protocol (V35)) ...
> and as far as I can understand it will be seen in linux as hdslN device
> !! (not sure).
>
> So will I be able to work with it as a normal ethernet device ?!
>
> Sorry for the stupid question, but I have to be sure it will work
>
> thanx alot
> raptor

--
`)_|_('       PSIkappa
   I k        psi _at_ atlantis.sk

_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

      reply	other threads:[~2002-08-10 12:45 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2002-08-09 19:35 [LARTC] non-ethernet devices and QoS ? raptor
2002-08-10 12:45 ` M.F. PSIkappa [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=marc-lartc-102898359711513@msgid-missing \
    --to=psi@platon.atlantis.sk \
    --cc=lartc@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.