* [LARTC] Fw: wondershaper kills eth0 :(
@ 2002-10-28 18:43 Rob
0 siblings, 0 replies; only message in thread
From: Rob @ 2002-10-28 18:43 UTC (permalink / raw)
To: lartc
Hi,
When i do 'wshaper start' the interface i have defined stops routing
traffic for some reason. It resumes routing when i do 'wshaper stop'.
I'm using debian stable (3.0 woody) with debian's default 2.4.18-686
kernel.
When I run the script I get no errors, and when I do a 'status',
everything looks correct.
Can ANYONE please give me a little insight as to what to do?
I have the variables set as follows:
DOWNLINK\x1450
UPLINK\x180
DEV=eth0
The machine is a NAT machine. I'm using shorewall to handle the NAT
stuff for me. But even with shorewall disabled, wshaper still fails.
Thank you for your help.
-Rob
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2002-10-28 18:43 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2002-10-28 18:43 [LARTC] Fw: wondershaper kills eth0 :( Rob
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.