[LARTC] some problems with the tc command

[LARTC] some problems with the tc command

[Jose Luis Pradas Adán]

[-- Attachment #1: Type: text/plain, Size: 476 bytes --]

Hello everyone!

I have some problems with the tc command. 
I write the same commands as in the manual but it gives me an error. I write: "tc qdisc add dev eth0 root handle 1:0 cbq bandwidth 100Mbit avpkt 1000" for example but it doesn't work. I have similar problems with "tc qdisc add dev eth0 root handle 1: prio"
I don't find the solution. I have the 2.4.18 kernel version. 
Does anyone know why it doesn't work properly?

Regards to all and thank you in advance!

[-- Attachment #2: Type: text/html, Size: 1239 bytes --]

Re: [LARTC] some problems with the tc command

[Stef Coene]

On Tuesday 11 March 2003 22:15, Jose Luis Pradas Adán wrote:
> Hello everyone!
>
> I have some problems with the tc command.
> I write the same commands as in the manual but it gives me an error. I
> write: "tc qdisc add dev eth0 root handle 1:0 cbq bandwidth 100Mbit avpkt
> 1000" for example but it doesn't work. I have similar problems with "tc
> qdisc add dev eth0 root handle 1: prio" I don't find the solution. I have
> the 2.4.18 kernel version.
> Does anyone know why it doesn't work properly?
You say "it doesn't work".  Can you be more specific?  Can you execute the 
commands without error? 

Stef

-- 

stef.coene@docum.org
 "Using Linux as bandwidth manager"
     http://www.docum.org/
     #lartc @ irc.oftc.net

_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/