[LARTC] teql problem

[LARTC] teql problem

[Eric Leblond]

[-- Attachment #1: Type: text/plain, Size: 595 bytes --]

Hello,

I've got problem to add a teql qdisc on a ip_gre tunnel interface.
(works with ethernet interface)

It does not work after boot, but after some try (with different
commands) it began to work. And it is almost persistent because, even if
you unload teql and ip_gre modules, it works after reload. reboot is the
only thing (I found) that breaks the working state. 

I really don't know where to look at. I've done a strace to the command
when ok and not ok and I did not see what could happened.

Any help greatly appreciated !
-- 
Eric Leblond <eric@regit.org>
Regit.org

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 189 bytes --]

Re: [LARTC] teql problem

[Eric Leblond]

[-- Attachment #1: Type: text/plain, Size: 326 bytes --]

On Tue, 2003-05-13 at 11:59, Eric Leblond wrote:
> Hello,
> 
> I've got problem to add a teql qdisc on a ip_gre tunnel interface.
> (works with ethernet interface) :

I forget the message :

# tc qdisc add dev neta root teql0
RTNETLINK answers: Invalid argument

BR,
-- 
Eric Leblond <eric@regit.org>
Regit.org

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 189 bytes --]

Re: [LARTC] teql problem

[Eric Leblond]

[-- Attachment #1: Type: text/plain, Size: 564 bytes --]

On Tue, 2003-05-13 at 13:55, Eric Leblond wrote:
> On Tue, 2003-05-13 at 11:59, Eric Leblond wrote:
> > Hello,
> > 
> > I've got problem to add a teql qdisc on a ip_gre tunnel interface.
> > (works with ethernet interface) :

For those who can be interested by the answer :
taken from the source code of teql :
1. Slave devices MUST be active devices, i.e., they must raise the tbusy
      signal and generate EOI events. If you want to equalize virtual
devices like tunnels, use a normal eql device.


-- 
Eric Leblond <eric@regit.org>
Regit.org

[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 189 bytes --]