* [LARTC] DSMARK
@ 2003-06-11 15:43 Emmanuel SIMON
2003-06-11 16:26 ` Stef Coene
0 siblings, 1 reply; 2+ messages in thread
From: Emmanuel SIMON @ 2003-06-11 15:43 UTC (permalink / raw)
To: lartc
Hello,
When I try to install DSMARK, I have :
# tc qdisc add dev eth0 root handle 1:0 dsmark indices 64 set_tc_index
Unknown qdisc "dsmark", hence option "indices" is unparsable
all the qdisc are compiled as modules
the module sch_dsmark.o is loaded but unused
May I ask again the questions i have already asked in case of someone see
them in this mail ?
About DSMARK, I don't understand the way it works:
- What is the (mask, Value) ? What is it used for ?
- Does it mark the packet or the structure in the kernel ?
- If i can mark the packet, how is it done ? Can i put only 'minimize
delay', 'maximize throughput' and so on, or can i put what i want in the TOS
field (for exemple 10110111) ?
- Does it exist a howto only about DSMARK ?
Thanks in advance for your help
Manu
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [LARTC] DSMARK
2003-06-11 15:43 [LARTC] DSMARK Emmanuel SIMON
@ 2003-06-11 16:26 ` Stef Coene
0 siblings, 0 replies; 2+ messages in thread
From: Stef Coene @ 2003-06-11 16:26 UTC (permalink / raw)
To: lartc
On Wednesday 11 June 2003 17:43, Emmanuel SIMON wrote:
> Hello,
>
> When I try to install DSMARK, I have :
> # tc qdisc add dev eth0 root handle 1:0 dsmark indices 64 set_tc_index
> Unknown qdisc "dsmark", hence option "indices" is unparsable
>
> all the qdisc are compiled as modules
> the module sch_dsmark.o is loaded but unused
You also need a tc binary with diffserv enabled. If you have the iproute2
source, open the file Config, enable diffserv and recompile tc.
> May I ask again the questions i have already asked in case of someone see
> them in this mail ?
Yes :)
> About DSMARK, I don't understand the way it works:
> - What is the (mask, Value) ? What is it used for ?
> - Does it mark the packet or the structure in the kernel ?
> - If i can mark the packet, how is it done ? Can i put only 'minimize
> delay', 'maximize throughput' and so on, or can i put what i want in the
> TOS field (for exemple 10110111) ?
> - Does it exist a howto only about DSMARK ?
I can only answer the last question : not that I know.
Stef
--
stef.coene@docum.org
"Using Linux as bandwidth manager"
http://www.docum.org/
#lartc @ irc.oftc.net
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2003-06-11 16:26 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2003-06-11 15:43 [LARTC] DSMARK Emmanuel SIMON
2003-06-11 16:26 ` Stef Coene
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.