* [LARTC] Help please on HTB vs CBQ for shaping on a 10Mbit link and igress
@ 2003-06-20 7:49 Derek Sims
0 siblings, 0 replies; only message in thread
From: Derek Sims @ 2003-06-20 7:49 UTC (permalink / raw)
To: lartc
I am setting up some traffic shaping on a 10Mbit (bursting to 20Mbit)
link. with various class rates from 2Mbit to 6Mbit
My router is Intel (1GHz processor)
I have configured my script using HTB, however from reading the
documentation HTB appears to be using the same alogorithm as TBF, and
TBF is only effective up to 1Mbit.
Should I be be re-scripting to use CBQ?
I am also using igress shaping ( without IMQ ) and the filter
alogroriths are also TBF .
Can anyone recommend a workable rule for the ratio between rate and
burst for higher bandwidths? - it looks to me as though it should be
around 22:1
Does the "latency" parameter cause packets to be dropped when they have
been waiting more than latency ms?
TIA,
Derek
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2003-06-20 7:49 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2003-06-20 7:49 [LARTC] Help please on HTB vs CBQ for shaping on a 10Mbit link and igress Derek Sims
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.