All of lore.kernel.org
 help / color / mirror / Atom feed
From: Patrick McHardy <kaber@trash.net>
To: lartc@vger.kernel.org
Subject: Re: [LARTC] Combining ingress and egress ( IMQ+HTB)
Date: Thu, 26 Jun 2003 13:23:19 +0000	[thread overview]
Message-ID: <marc-lartc-105663392105321@msgid-missing> (raw)
In-Reply-To: <marc-lartc-105656633611826@msgid-missing>

Hi Rajesh,
it should work fine with the latest version, just direct both directions to
the same imq device. If you're successful it would be nice if you can drop
me a short note.

Thanks,
Patrick

Rajesh Srivastava wrote:

>I am successfully running ingress (IMQ) and egress (HTB) shaping on a
>bridge.
>
>Is there any way to combine and share the bandwidth between ingress and
>egress?
>
>Example:
>I have set up www service for egress at 128 KB and ingress at 256 KB. The
>shaping on them works fine separately. However, I want to create a single
>virtual pipe for www traffic and limit both ingress and egress combined to
>256 KB.
>
>Thanks.
>
>Rajesh
>
>
>_______________________________________________
>LARTC mailing list / LARTC@mailman.ds9a.nl
>http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
>  
>

_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

      parent reply	other threads:[~2003-06-26 13:23 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2003-06-25 18:37 [LARTC] Combining ingress and egress ( IMQ+HTB) Rajesh Srivastava
2003-06-25 23:37 ` Joseph Watson
2003-06-26  3:14 ` Fw: " Rajesh Srivastava
2003-06-26 13:23 ` Patrick McHardy [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=marc-lartc-105663392105321@msgid-missing \
    --to=kaber@trash.net \
    --cc=lartc@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.