[LARTC] Parent rate=ceil Limit not respected

* [LARTC] Parent rate=ceil Limit not respected
@ 2003-11-09  6:26 Chijioke Kalu
  2003-11-10 17:43 ` Stef Coene
                   ` (2 more replies)
  0 siblings, 3 replies; 4+ messages in thread
From: Chijioke Kalu @ 2003-11-09  6:26 UTC (permalink / raw)
  To: lartc

[-- Attachment #1: Type: text/plain, Size: 1138 bytes --]

Hi Stef, lo all,

Am hoping someone could have the time to look at my simple script, it 
basically tries to restrict users based on their ip, but I also incorporated 
the hints given by Stef on being able to allow local traffic unrestricted.  
no iptable marking (fw filter) is used, just tc.

I see traffic passing thru all the classes when ever those systems are in 
use.

Ave done some stress test on the local traffic by plugging p2p/web crawlers 
on the LAN of one of the systems, each time i notice that the parent ceil 
limit is being broken.

I have met the one major requirement, sum of child classes rate <= parent 
rate.  I dont know what else i might be doing wrong, once placed perturb to 
1, and internally(kernel) am using PSCHED_CPU and a sfq buffer length of 15 
as against 128. (notes on docum.org) to try and increase speed.  (Processor 
has TSC flag)

Would be much obliged on any comments/improvements i can make on the script.

Using kernel 2.4.22

TIA

K

_________________________________________________________________
MSN Shopping upgraded for the holidays!  Snappier product search... 
http://shopping.msn.com

[-- Attachment #2: rc.qosv4.txt --]
[-- Type: text/plain, Size: 5907 bytes --]

#!/bin/bash
#
# rc.qos - GPL ver 0.04 (rate limiting specific ip's on a LAN)
#	<kchijioke@msn.com>
#
# TODO:
#	1) make auto-startable
#	2) place command line arguments
#	3) make generic, this gonna be a hardone ;)
#	4) improve QoS, attempt DiffServ again
#	5) incorporate SQUID, include upload traffic control
#	6) auto determine bandwidth per ip
#
#	Acknowledgements:
#		Much thanks to Stef, Alex, Clouter and Ahu
#		Special thanks to reeler@#lartc for pointing out the not so obvious (in 
my case) ;)
#
# Schematic
# ---------
#
#		_________root 1:0_______
#              /                        \
#	local (10mbit)	        Internet (90kbit)
#            1:2                       1:3
#       (h=handle 5)                    |
#                                       |
#                         --------------+-----------------------------------
#                        /           |        |       |         |           
\
#                      1:10        1:11     1:12     1:13      1:...       
1:50
#                (high priority)  (sys 1)  (sys 2)  (sys 3)  (sys ...)   
(default)
#                     (h10)        (h11)    (h12)    (h13)    (h...)       
(h50)
#
#set -x
# LAN Interface ( Download )

# delete/create root class
tc qdisc del dev eth1 root 2> /dev/null
tc qdisc add dev eth1 root handle 1: htb default 50 r2q 1

# create local class
tc class add dev eth1 parent 1: classid 1:2 htb rate 10mbit ceil 10mbit

# create internet class #ceil 86
tc class add dev eth1 parent 1: classid 1:3 htb rate 86Kbit ceil 90Kbit

# create high priority class in internet class for ack, icmp packets #ceil 
82
	tc class add dev eth1 parent 1:3 classid 1:10 htb rate 5Kbit ceil 82Kbit 
prio 0

# create 20 system classes in internet class, sys01 - sys20 ( 1:11 - 1:30 ) 
#ceil 82
for LOOP in `seq 11 30`
do
	tc class add dev eth1 parent 1:3 classid 1:$[$LOOP] htb \
		rate 4Kbit ceil 82Kbit prio 2
done

# default class #ceil 80
tc class add dev eth1 parent 1:3 classid 1:50 htb rate 2Kbit ceil 80Kbit 
prio 3

# do qdisc attachment # perturb 10
tc qdisc add dev eth1 parent 1:2 handle 5: sfq perturb 10

for LOOP in `seq 10 30`
do
	tc qdisc add dev eth1 parent 1:$[$LOOP] handle $[$LOOP]: sfq \
		perturb 10
done
tc qdisc add dev eth1 parent 1:50 handle 50: sfq perturb 10

# filter rules

# 10mbit local traffic matched
tc filter add dev eth1 parent 1: protocol ip prio 100 u32 match ip src 
192.168.0.0/24 classid 1:2
# any other thing not matched to classid 1:3 ( must be from internet bound )
# 90Kbit Internet traffic match
tc filter add dev eth1 parent 1: protocol ip prio 100 u32 match ip tos 0 0 
classid 1:3

# High priority class 1:10 filter
tc filter add dev eth1 parent 1:3 protocol ip prio 200 handle 10 fw classid 
1:10

# (1:10 is high priority class in internet class)
# TOS minimum delay in 1:10
tc filter add dev eth1 parent 1:3 protocol ip prio 100 u32 \
	match ip tos 0x10 0xff flowid 1:10

# UDP Traffic in 1:10
tc filter add dev eth1 parent 1:3 protocol ip prio 100 u32 \
	match ip protocol 17 0xff \
	match ip dport 53 0xffff flowid 1:10

# ICMP (ip protocol 1) Set class to 1:10 to impress friends
tc filter add dev eth1 parent 1:3 protocol ip prio 100 u32 \
	match ip protocol 1 0xff flowid 1:10

# To speed up downloads while an upload is going on, put ACK packets in
# the 1:10 class
# ACKs on packets < 64 bytes
tc filter add dev eth1 parent 1:3 protocol ip prio 100 u32 \
	match ip protocol 6 0xff \
	match u8 0x05 0x0f at 0 \
	match u16 0x0000 0xffc0 at 2 \
	match u8 0x10 0xff at 33 \
	flowid 1:10

tc filter add dev eth1 parent 1:3 protocol ip prio 100 u32 \
	match ip protocol 6 0xff \
	match u8 0x05 0x0f at 0 \
	match u16 0x0000 0xffc0 at 2 \
	flowid 1:10

# remaining filters for sys01 - sys20
tc filter add dev eth1 parent 1:3 protocol ip prio 100 u32 match ip dst 
192.168.0.106/32 flowid 1:11
tc filter add dev eth1 parent 1:3 protocol ip prio 100 u32 match ip dst 
192.168.0.107/32 flowid 1:12
tc filter add dev eth1 parent 1:3 protocol ip prio 100 u32 match ip dst 
192.168.0.108/32 flowid 1:13
tc filter add dev eth1 parent 1:3 protocol ip prio 100 u32 match ip dst 
192.168.0.109/32 flowid 1:14
tc filter add dev eth1 parent 1:3 protocol ip prio 100 u32 match ip dst 
192.168.0.110/32 flowid 1:15
tc filter add dev eth1 parent 1:3 protocol ip prio 100 u32 match ip dst 
192.168.0.111/32 flowid 1:16
tc filter add dev eth1 parent 1:3 protocol ip prio 100 u32 match ip dst 
192.168.0.112/32 flowid 1:17
tc filter add dev eth1 parent 1:3 protocol ip prio 100 u32 match ip dst 
192.168.0.113/32 flowid 1:18
tc filter add dev eth1 parent 1:3 protocol ip prio 100 u32 match ip dst 
192.168.0.114/32 flowid 1:19
tc filter add dev eth1 parent 1:3 protocol ip prio 100 u32 match ip dst 
192.168.0.121/32 flowid 1:20
tc filter add dev eth1 parent 1:3 protocol ip prio 100 u32 match ip dst 
192.168.0.122/32 flowid 1:21
tc filter add dev eth1 parent 1:3 protocol ip prio 100 u32 match ip dst 
192.168.0.123/32 flowid 1:22
tc filter add dev eth1 parent 1:3 protocol ip prio 100 u32 match ip dst 
192.168.0.124/32 flowid 1:23
tc filter add dev eth1 parent 1:3 protocol ip prio 100 u32 match ip dst 
192.168.0.125/32 flowid 1:24
tc filter add dev eth1 parent 1:3 protocol ip prio 100 u32 match ip dst 
192.168.0.126/32 flowid 1:25
tc filter add dev eth1 parent 1:3 protocol ip prio 100 u32 match ip dst 
192.168.0.127/32 flowid 1:26
tc filter add dev eth1 parent 1:3 protocol ip prio 100 u32 match ip dst 
192.168.0.128/32 flowid 1:27
tc filter add dev eth1 parent 1:3 protocol ip prio 100 u32 match ip dst 
192.168.0.130/32 flowid 1:28
tc filter add dev eth1 parent 1:3 protocol ip prio 100 u32 match ip dst 
192.168.0.129/32 flowid 1:29
tc filter add dev eth1 parent 1:3 protocol ip prio 100 u32 match ip dst 
192.168.0.104/32 flowid 1:30
tc filter add dev eth1 parent 1:3 protocol ip prio 200 handle 50 fw classid 
1:50

# end of LAN interface ( download ) script

^ permalink raw reply	[flat|nested] 4+ messages in thread