From: Padraig Brady <padraig.brady@corvil.com>
To: lartc@vger.kernel.org
Subject: Re: [LARTC] bridging troubles
Date: Mon, 24 Nov 2003 14:46:19 +0000 [thread overview]
Message-ID: <marc-lartc-106968528330656@msgid-missing> (raw)
In-Reply-To: <marc-lartc-106968023824618@msgid-missing>
Robert Kurjata wrote:
> Witaj Padraig,
>
> W Twoim liœcie datowanym 24 listopada 2003 (14:18:04) mo¿na przeczytaæ:
>
> PB> Hi, I would like to be able to control
> PB> the slave devices of a bridge independently
> PB> of the bridge interface. For e.g. if I have
> PB> eth0 and eth1 in a bridge eth0-eth1, then
> PB> I the following doesn't give an error,
> PB> but doesn't actually work either?
>
> PB> ip link set dev eth0 promisc on
>
> AFAIR in the bridge the interfaces MUST be in promisc mode for the
> bridge to work at all. So the command above has no meaning.
Well it does if I want to stop traffic temporarily.
> PB> However this does work?
>
> PB> ip link set dev eth0 down
this does stop traffic temporarily, but
has other side affects I don't want.
Pádraig.
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
prev parent reply other threads:[~2003-11-24 14:46 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2003-11-24 13:18 [LARTC] bridging troubles Padraig Brady
2003-11-24 14:46 ` Padraig Brady [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=marc-lartc-106968528330656@msgid-missing \
--to=padraig.brady@corvil.com \
--cc=lartc@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.