All of lore.kernel.org
 help / color / mirror / Atom feed
From: Suraj Shankar <su_raj_in@yahoo.com>
To: lartc@vger.kernel.org
Subject: Re: [LARTC] How to config ip in 2nd lan card in Linux pc and config ip masq?
Date: Sat, 06 Dec 2003 07:19:55 +0000	[thread overview]
Message-ID: <marc-lartc-107069569412456@msgid-missing> (raw)
In-Reply-To: <marc-lartc-107069106110461@msgid-missing>

Hi,
--- "Md.Ahsanul Haque Chowdhury" <ahaque@neksus.com>
wrote:

> (192.168.1.1). But after install the Linux 7.2 in 
how did you get a copy of Linux 7.2? ;)
i'll safely assume thats RHL 7.2 ...

> /etc/sysconfig/network-
> scripts/  only showing   ifcfg-eth0  no interface is
> showing like ifcfg-eth1.
'netconfig' would be your best bet. Also, check dmesg,
to see that you card has been detected. If the card is
detected, you can copy ifcfg-eth0 to ifcfg-eth1 and
make the appropriate changes.

> & how to config ip masq to route to get Internet in
> local workstations.?
...just use iptables to masq. your internal subnet;
man iptables.

suraj.

__________________________________
Do you Yahoo!?
Free Pop-Up Blocker - Get it now
http://companion.yahoo.com/
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/

      reply	other threads:[~2003-12-06  7:19 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2003-12-06  6:11 [LARTC] How to config ip in 2nd lan card in Linux pc and config ip masq? Md.Ahsanul Haque Chowdhury
2003-12-06  7:19 ` Suraj Shankar [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=marc-lartc-107069569412456@msgid-missing \
    --to=su_raj_in@yahoo.com \
    --cc=lartc@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.