* [LARTC] How to config ip in 2nd lan card in Linux pc and config ip masq?
@ 2003-12-06 6:11 Md.Ahsanul Haque Chowdhury
2003-12-06 7:19 ` Suraj Shankar
0 siblings, 1 reply; 2+ messages in thread
From: Md.Ahsanul Haque Chowdhury @ 2003-12-06 6:11 UTC (permalink / raw)
To: lartc
Dear Sir,
I have install 2 lan card (Micronet Lan Card) in Linux pc, in 1st lan card I
will use public ip ( 203.x.x.x) and 2nd lan card I will use private ip
(192.168.1.1). But after install the Linux 7.2 in /etc/sysconfig/network-
scripts/ only showing ifcfg-eth0 no interface is showing like ifcfg-eth1.
My questions are how to enable or config 2nd lan card and config ip in 2nd lan
card.?
& how to config ip masq to route to get Internet in local workstations.?
Pls help me to solve these problem.
Thanks & Best regards.
__________________________
Md. Ahsanul Haque Chowdhury.
E-mail:ahaque@neksus.com , ahaque@link3.net
Web:http://www.neksus.com
Web:http://www.link3.net
Date:2003-12-06.
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [LARTC] How to config ip in 2nd lan card in Linux pc and config ip masq?
2003-12-06 6:11 [LARTC] How to config ip in 2nd lan card in Linux pc and config ip masq? Md.Ahsanul Haque Chowdhury
@ 2003-12-06 7:19 ` Suraj Shankar
0 siblings, 0 replies; 2+ messages in thread
From: Suraj Shankar @ 2003-12-06 7:19 UTC (permalink / raw)
To: lartc
Hi,
--- "Md.Ahsanul Haque Chowdhury" <ahaque@neksus.com>
wrote:
> (192.168.1.1). But after install the Linux 7.2 in
how did you get a copy of Linux 7.2? ;)
i'll safely assume thats RHL 7.2 ...
> /etc/sysconfig/network-
> scripts/ only showing ifcfg-eth0 no interface is
> showing like ifcfg-eth1.
'netconfig' would be your best bet. Also, check dmesg,
to see that you card has been detected. If the card is
detected, you can copy ifcfg-eth0 to ifcfg-eth1 and
make the appropriate changes.
> & how to config ip masq to route to get Internet in
> local workstations.?
...just use iptables to masq. your internal subnet;
man iptables.
suraj.
__________________________________
Do you Yahoo!?
Free Pop-Up Blocker - Get it now
http://companion.yahoo.com/
_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://lartc.org/
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2003-12-06 7:19 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2003-12-06 6:11 [LARTC] How to config ip in 2nd lan card in Linux pc and config ip masq? Md.Ahsanul Haque Chowdhury
2003-12-06 7:19 ` Suraj Shankar
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.