[LARTC] wrr/bandwith control in ppp0

[LARTC] wrr/bandwith control in ppp0

[Diego Torres]

is possible to setup any bandwith resource control in a ppp0 interface?
i'd like to distribute bandwith equally between pcs in a network, and
inside each pc, equally between protocols... is this possible? all the
documentation refers to eth0 type interfaces... so?

-- 
$~ who | grep -i brunette | date ; cd ~ ; unzip ; touch; strip; finger; mount; gasp; yes; uptime ; umount; sleep 

Diego Torres - rapid@ivworlds.org - Madrid / España


_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/

Re: [LARTC] wrr/bandwith control in ppp0

[Christian Worm Mortensen]

Hi,

> is possible to setup any bandwith resource control in a ppp0 interface?

I am almost sure that this is possible.

> i'd like to distribute bandwith equally between pcs in a network, and
> inside each pc, equally between protocols... is this possible? 

The example setup included with WRR should be appropriate. Inside each PC it will not distribute equally between protocols, though. It will use SFQ which distributes somewhat equally between sessions (which is probably what you want).

> all the documentation refers to eth0 type interfaces... so?

That's what most people use ;-)


Christian



_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/