Ri:Re: [LARTC] How to del the filter?

Ri:Re: [LARTC] How to del the filter?

[macca]

> ---------- Initial message -----------
> 
> From    : lartc-admin@mailman.ds9a.nl
> To      : <lartc@mailman.ds9a.nl>
> Cc      : 
> Date    : Fri, 13 Jul 2001 15:41:02 +0200
> Subject : Re: [LARTC] How to del the filter?
> 
> In order to delete a filter, the prio value is important . If I don't
> remember too bad , if you type
> 
> # tc filter del dev eth0 parent 1:0 prio 100
> 
> you should be done.
> Bewary : all filters which match such description will be erased, regardless
> of other parameters such fmark/u32/etc.
> 
> God Saves Tc

ok it's right!!!!!!!!!!Thanks  Jose
One question before to del i write:

 [root@deis21 PROVE IPROUTE]# tc filter show dev eth0
filter parent 1: protocol ip pref 100 u32
filter parent 1: protocol ip pref 100 u32 fh 800: ht divisor 1
filter parent 1: protocol ip pref 100 u32 fh 800::800 order 2048 key ht 800 bkt 0 flowid 1:1
  match c0a80102/ffffffff at 16  

it's normal there is wrote "pref" and not prio?
I had created only one filter, why there is wrote 3 line, that means that trere are 3 filter or is the same filter!
Thanks



_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/

Re: Ri:Re: [LARTC] How to del the filter?

[Jose Miguel Varet]

aarrg damn my router, I missed that one XD
you are right, for filters is "pref" and not "prio". It's been days since I
do not touch the tc commands, so I mixed the classes' "prio" with filter's
"pref".
So issue the "del" command specifying the pref, et voilâ.
Greets,


                Jose,

----- Original Message -----
From: <macca@inwind.it>
To: <lartc@mailman.ds9a.nl>
Sent: Friday, July 13, 2001 4:37 PM
Subject: Ri:Re: [LARTC] How to del the filter?


> > ---------- Initial message -----------
> >
> > From    : lartc-admin@mailman.ds9a.nl
> > To      : <lartc@mailman.ds9a.nl>
> > Cc      :
> > Date    : Fri, 13 Jul 2001 15:41:02 +0200
> > Subject : Re: [LARTC] How to del the filter?
> >
> > In order to delete a filter, the prio value is important . If I don't
> > remember too bad , if you type
> >
> > # tc filter del dev eth0 parent 1:0 prio 100
> >
> > you should be done.
> > Bewary : all filters which match such description will be erased,
regardless
> > of other parameters such fmark/u32/etc.
> >
> > God Saves Tc
>
> ok it's right!!!!!!!!!!Thanks  Jose
> One question before to del i write:
>
>  [root@deis21 PROVE IPROUTE]# tc filter show dev eth0
> filter parent 1: protocol ip pref 100 u32
> filter parent 1: protocol ip pref 100 u32 fh 800: ht divisor 1
> filter parent 1: protocol ip pref 100 u32 fh 800::800 order 2048 key ht
800 bkt 0 flowid 1:1
>   match c0a80102/ffffffff at 16
>
> it's normal there is wrote "pref" and not prio?
> I had created only one filter, why there is wrote 3 line, that means that
trere are 3 filter or is the same filter!
> Thanks
>
>
>
> _______________________________________________
> LARTC mailing list / LARTC@mailman.ds9a.nl
> http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO:
http://ds9a.nl/2.4Routing/
>


_______________________________________________
LARTC mailing list / LARTC@mailman.ds9a.nl
http://mailman.ds9a.nl/mailman/listinfo/lartc HOWTO: http://ds9a.nl/2.4Routing/