Booting An Ultra Sparc 10

[Stephan van Hienen <s.v.hienen@cable.a2000.nl>]

hi just wanted to install on an ultra sparc 10
(300mhz ultra II with 320mb ram)
i'm doing the load with boot net
form an intel redhat 5.0 (p2)

i shows linux 2.1.99 (or the .old image or .verryold)
320mb ram
and that i use the ati controller (there is also an creator 3d inside,
but the monitor is on the oboard card)

and it crashes :

openboot 3.11


Boot device /pci@1f,0/pci@1,1/network@1,1

i tells me :

Found cpu 0
found 1 cpu  prom device tree node(s).
Central: no central found.
Memory: 319560k available (1576k kernel code, 4432k data, 152 init)
[fffff80000000000,fffff80013f26000]
SBUS: No SBUS's found.
Console: colour SUNPCI 128x54, 16 point font, 864 scans
PCI: Probing for controllers
PCI: Found SABRE, main regs at ffff(5f)9fe00000000
SABRE: PCI cofnfig space at fffff9fe01000000
SABREL DVMA at c0000000 [2 [20000000]

PCI: Probing PCI hardware 
ebus0: fff.........
ebus1: fff...........
mach64_init:  IOBASE[fffff9fe02c00100] MEMBASE[fffff9ffe1000000]
mah<err>
mach64_init  chip_type[4754], total_vram[00200000]
Unable to handle kernel NULL pointer dereference<1>tsk->mm->context 0000000000000000
tsk->mm->pgd = fffff800000020000

(here a picture )

swapper(0):Oops
TSTATE: and then some registers
......
.......
.......
.......
......
.......
.......
DUMP:

Kernel panic: Attempted to kill the idle task
In swapper task - not syncing
Press L1-A to return to the boot prom
_


and that is it


P.s. also mail me at ddx@cable.a2000.nl
because i'm not approved by the list owner to be on the list
so i can't read the list

P.s. i typed this stuff in
so i can have made a  mistake