* cp1500
@ 1999-03-20 4:37 Robert Cagle
1999-03-20 9:55 ` cp1500 David Miller
0 siblings, 1 reply; 2+ messages in thread
From: Robert Cagle @ 1999-03-20 4:37 UTC (permalink / raw)
To: ultralinux
Hello,
I have made some progress getting UltraPenguin 1.1.9 running
on a Sun CP1500 CompactPci board (UltraSparc IIi 270/300Mhz).
Everything seems to work except the on-board SYM53C875 SCSI controller.
Does anybody know what might cause these errors?
<6>ncr53c8xx: at PCI bus 1, device 2, function 0
<6>ncr53c8xx: 53c875 detected
<6>ncr53c875-0: rev=0x04, base=0x1ffe0008000, io_port=0xfffff9fe02c00000, irq=3,,,,
7e0
<4>ncr53c875-0: NCR clock is 40218KHz, 40218KHz
<6>ncr53c875-0: ID 7, Fast-20, Parity Checking
<6>ncr53c875-0: on-chip RAM at 0x1ffe000a000
<4>CACHE TEST FAILED: script execution failed.
<4>start¿90b640, pc¿90b64c, end¿90b66c
<3>CACHE INCORRECTLY CONFIGURED.
<6>ncr53c875-0: detaching...
<4>scsi : 0 hosts.
<4>scsi : detected total.
I have played around with the kernel SCSI config settings, but nothing
seems to work. I'm fairly new at this, so please go easy if this
is a no-brainer!
Bob Cagle
rcagle@ccpu.com
(I'm not on the mailing list, so please reply personally - thanks!)
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~1999-03-20 9:55 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
1999-03-20 4:37 cp1500 Robert Cagle
1999-03-20 9:55 ` cp1500 David Miller
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.