* 1.1.9 net boot failer on E3500
@ 1999-04-09 0:48 Marty Lucich
1999-04-09 1:01 ` David Miller
1999-04-09 16:32 ` Jakub Jelinek
0 siblings, 2 replies; 3+ messages in thread
From: Marty Lucich @ 1999-04-09 0:48 UTC (permalink / raw)
To: ultralinux
Greetings,
I just downloaded
ftp://ultra.linux.cz/pub/ultrapenguin-1.1.9/sparc64/images/tftprescue.img
dated Tue Apr 6 19:37:00 1999. When I tried to boot it on an E3500
it didn't get far.
Rebooting with command: boot net
Boot device: /sbus@3,0/SUNW,hme@3,8c00000 File and args:
Using Onboard Transceiver - Link Up.
34ae00
Server IP address: 149.136.180.12
Client IP address: 149.136.180.4
TILO
Fast Data Access MMU Miss
{6} ok
Is this a known problem? Is it really even a problem?
The full console messages follow.
Thanks
-m
----------------------------------------------------------------------
{6} ok boot net
Resetting...
Software Power ON
@(#) Ultra Enterprise 3.2 Version 18 created 1998/09/10 14:13
CPU = 0000.0000.0000.0006
Probing keyboard Done
3,0>
3,0>@(#) POST 3.9.4 1998/06/09 16:25
3,0>
SelfTest Initializing (Diag Level 10, ENV 00004001) IMPL 0011 MASK 20
3,0>Board 3 CPU FPROM Test
3,0>Board 3 Basic CPU Test
3,0> Set CPU UPA Config and Init SDB Data
3,0> SRAM Mode = 22, Clock Mode = 4:1, PCON = 6fa, MCAP = 0
3,0>Board 3 MMU Enable Test
3,0> DMMU Init
3,0> IMMU Init
3,0> Mapping Selftest Enabling MMUs
3,0>Board 3 Ecache Test
3,0> Ecache Probe
3,0> Ecache Tags
3,0> Ecache Quick Verify
3,0> Ecache Init
3,0> Ecache RAM
3,0> Ecache Address Line
3,0> Configure Ecache Limit
3,0>Ecache Size = 00400000, Limited to 00400000
3,0>Board 3 FPU Functional Test
3,0> FPU Enable
3,0>Board 3 Board Master Select Test
3,0> Selecting a Board Master
3,0>Board 3 FireHose Devices Test
3,0>Board 3 Address Controller Test
3,0> AC Initialization
3,0> AC DTAG Init
3,0>Board 3 Dual Tags Test
3,0> AC DTAG Init
3,0>Board 3 FireHose Controller Test
3,0> FHC Initialization
3,0>Board 3 JTAG Test
3,0> Verify System Board Scan Ring
3,0>Board 3 Centerplane Test
3,0> Centerplane Join
3,0>Setting JTAG Master
3,0>Clear JTAG Master
3,0>Board 3 Setup Cache Size Test
3,0> Setting Up Cache Size
3,0>Board 3 System Master Select Test
3,0> Setting System Master
3,0>POST Master Selected (JTAG,CENTRAL)
3,0>Board 16 Clock Board Test
3,0> Clock Board Initialization
3,0> Clock Board Temperature Check
3,0>Board 16 Clock Board Serial Ports Test
3,0>Board 16 NVRAM Devices Test
3,0> M48T59 (TOD) Init
3,0>Board 3 System Board Probe Test
3,0> Probing all CPU/Memory BDA
3,0> Probing System Boards
3,0> Probing CPU Module JTAG Rings
3,0>Setting System Clock Frequency
3,0> CPU Module mid 6 Checked in OK (speed code = 7)
3,0> CPU mid 14 Version\0170011.20000507
3,0> CPU Module mid 14 Checked in OK (speed code = 7)
3,0>System Frequency (MHz),fcpu36, fmod\x168, fsys„, fgen36
3,0>TESTING BOARD 1
3,0>Board 1 JTAG Test
3,0> Verify System Board Scan Ring
3,0>Board 1 Centerplane Test
3,0> Centerplane Check
3,0>Board 1 Address Controller Test
3,0> AC Initialization
3,0>Setting Freq to 25MHZ
3,0> AC DTAG Init
3,0>Board 1 FireHose Controller Test
3,0> FHC Initialization
3,0>Board 1 NVRAM Devices Test
3,0> M48T59 (TOD) Init
3,0>TESTING BOARD 5
3,0>Board 5 JTAG Test
3,0> Verify System Board Scan Ring
3,0>Board 5 Centerplane Test
3,0> Centerplane Check
3,0>Board 5 Address Controller Test
3,0> AC Initialization
3,0>Setting Freq to 25MHZ
3,0> AC DTAG Init
3,0>Board 5 FireHose Controller Test
3,0> FHC Initialization
3,0>Board 5 NVRAM Devices Test
3,0> M48T59 (TOD) Init
3,0>Re-mapping to Local Device Space
3,0>Begin Central Space Serial Port access
3,0>Enable AC Control Parity
3,0>Hotplug Trigger Test
3,0>Init Counters for Hotplug
3,0>Board 3 Cross Calls Test
3,0>Board 3 Environmental Probe Test
3,0> Environmental Probe
3,0>Checking Power Supply Configuration
3,0>Power is adequate, load 4 ps 2
3,0>Use existing memory configuraton
3,0>TESTING IO BOARD 1
3,0>Board 1 I/O FPROM Test
3,0>@(#) iPOST 3.4.6 1998/04/16 14:22
3,0> TESTING IO BOARD 1 ASICs
3,0> TESTING SysIO Port 0
3,0>Board 1 SysIO Registers Test
3,0> SysIO Register Initialization
3,0> SysIO RAM Initialization
3,0>Board 1 SysIO Functional Test
3,0> Clear Interrupt Map and State Registers
3,0>Board 1 OnBoard IO Chipset (SOC) Test
3,0> TESTING SysIO Port 1
3,0>Board 1 SysIO Registers Test
3,0> SysIO Register Initialization
3,0> SysIO RAM Initialization
3,0>Board 1 SysIO Functional Test
3,0> Clear Interrupt Map and State Registers
3,0>Board 1 OnBoard IO Chipset (FEPS) Test
3,0>IO BOARD 1 TESTED
3,0>TESTING IO BOARD 5
3,0>Board 5 I/O FPROM Test
3,0>@(#) iPOST 3.4.4 1997/08/26 17:37
3,0> TESTING IO BOARD 5 ASICs
3,0> TESTING SysIO Port 0
3,0>Board 5 SysIO Registers Test
3,0> SysIO Register Initialization
3,0> SysIO RAM Initialization
3,0>Board 5 SysIO Functional Test
3,0> Clear Interrupt Map and State Registers
3,0>Board 5 OnBoard IO Chipset (SOC) Test
3,0> TESTING SysIO Port 1
3,0>Board 5 SysIO Registers Test
3,0> SysIO Register Initialization
3,0> SysIO RAM Initialization
3,0>Board 5 SysIO Functional Test
3,0> Clear Interrupt Map and State Registers
3,0>Board 5 OnBoard IO Chipset (FEPS) Test
3,0>IO BOARD 5 TESTED
3,0>Probing for Disk System boards
3,0>Board 3 System Interrupts Test
3,0>
3,0> System Board Status
3,0>-----------------------------------------------------------------
3,0> Slot Board Status Board Type Failures
3,0>-----------------------------------------------------------------
3,0> 0 | Not installed | |
3,0> 1 | Normal |+IO Type 4 |
3,0> 2 | Not installed | |
3,0> 3 | Normal |+CPU/Memory |
3,0> 4 | Not installed | |
3,0> 5 | Normal |+IO Type 4 |
3,0> 6 | Not installed | |
3,0> 7 | Normal |+CPU/Memory |
3,0> 8 | Not installed | |
3,0> 9 | Not installed | |
3,0> 16 | Normal | Clock Board |
3,0>-----------------------------------------------------------------
3,0>
3,0> CPU Module Status
3,0>-----------------------------------------------------------------
3,0> MID OK Cache Speed Version
3,0>-----------------------------------------------------------------
3,0> 6 | y | 4096 | 336 | 00170011.20000507
3,0> 14 | y | 4096 | 336 | 00170011.20000507
3,0>-----------------------------------------------------------------
3,0>System Frequency (MHz),fcpu36, fmod\x168, fsys„, fgen36
3,0> Populated Memory Bank Status
3,0> bd # Size Address Way Status
3,0> 3 1024 0 2 Normal
3,0> 7 1024 1 2 Normal
3,0>
3,0>
POST COMPLETE
3,0>Entering OBP
Switching to high addresses
Setting up TLBs Done
MMU ON
PC = 0000.01ff.f000.1ea8
PC = 0000.0000.0000.1f14
Decompressing in Memory Done
Size = 0000.0000.0007.01b0
ttya initialized
Using POST's System Configuration
Setting up memory
Starting CPU ID 14
fhc ac simm-status environment sram flashprom SUNW,UltraSPARC-II
fhc ac simm-status environment sram flashprom SUNW,UltraSPARC-II
Probing UPA Slot at 2,0 sbus fhc ac environment flashprom eeprom sbus-speed counter-timer
Probing UPA Slot at 3,0 sbus counter-timer
Probing UPA Slot at a,0 sbus fhc ac environment flashprom eeprom sbus-speed counter-timer
Probing UPA Slot at b,0 sbus counter-timer
Probing /sbus@2,0 at d,0 SUNW,socal sf ssd sf ssd
Probing /sbus@2,0 at 1,0 Nothing there
Probing /sbus@2,0 at 2,0 Nothing there
Probing /sbus@3,0 at 3,0 SUNW,hme SUNW,fas sd st
Probing /sbus@3,0 at 0,0 Nothing there
Probing /sbus@a,0 at d,0 SUNW,socal sf ssd sf ssd
Probing /sbus@a,0 at 1,0 Nothing there
Probing /sbus@a,0 at 2,0 SUNW,ba
Probing /sbus@b,0 at 3,0 SUNW,hme SUNW,fas sd st
Probing /sbus@b,0 at 0,0 Nothing there
screen not found.
Can't open input device.
Keyboard not present. Using ttya for input and output.
Using POST's System Configuration
Setting up memory
Starting CPU ID 14
fhc ac simm-status environment sram flashprom SUNW,UltraSPARC-II
fhc ac simm-status environment sram flashprom SUNW,UltraSPARC-II
Probing UPA Slot at 2,0 sbus fhc ac environment flashprom eeprom sbus-speed counter-timer
Probing UPA Slot at 3,0 sbus counter-timer
Probing UPA Slot at a,0 sbus fhc ac environment flashprom eeprom sbus-speed counter-timer
Probing UPA Slot at b,0 sbus counter-timer
Probing /sbus@2,0 at d,0 SUNW,socal sf ssd sf ssd
Probing /sbus@2,0 at 1,0 Nothing there
Probing /sbus@2,0 at 2,0 Nothing there
Probing /sbus@3,0 at 3,0 SUNW,hme SUNW,fas sd st
Probing /sbus@3,0 at 0,0 Nothing there
Probing /sbus@a,0 at d,0 SUNW,socal sf ssd sf ssd
Probing /sbus@a,0 at 1,0 Nothing there
Probing /sbus@a,0 at 2,0 SUNW,ba
Probing /sbus@b,0 at 3,0 SUNW,hme SUNW,fas sd st
Probing /sbus@b,0 at 0,0 Nothing there
5-slot Sun Enterprise E3500, No Keyboard
OpenBoot 3.2.18, 2048 MB memory installed, Serial #10378427.
Ethernet address 8:0:20:9e:5c:bb, Host ID: 809e5cbb.
Rebooting with command: boot net
Boot device: /sbus@3,0/SUNW,hme@3,8c00000 File and args:
Using Onboard Transceiver - Link Up.
34ae00
Server IP address: 149.136.180.12
Client IP address: 149.136.180.4
TILO
Fast Data Access MMU Miss
{6} ok
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: 1.1.9 net boot failer on E3500
1999-04-09 0:48 1.1.9 net boot failer on E3500 Marty Lucich
@ 1999-04-09 1:01 ` David Miller
1999-04-09 16:32 ` Jakub Jelinek
1 sibling, 0 replies; 3+ messages in thread
From: David Miller @ 1999-04-09 1:01 UTC (permalink / raw)
To: ultralinux
The tftprescue image is known not to work at all, we have no plans to
fix it as we are so busy.
Now if the regular installer tftpboot image doesn't work, this we'd
like to know about.
Later,
David S. Miller
davem@redhat.com
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: 1.1.9 net boot failer on E3500
1999-04-09 0:48 1.1.9 net boot failer on E3500 Marty Lucich
1999-04-09 1:01 ` David Miller
@ 1999-04-09 16:32 ` Jakub Jelinek
1 sibling, 0 replies; 3+ messages in thread
From: Jakub Jelinek @ 1999-04-09 16:32 UTC (permalink / raw)
To: ultralinux
>
>
> The tftprescue image is known not to work at all, we have no plans to
> fix it as we are so busy.
Minor correction: I've just commited a fix for this, so once I update
kernels in the boot images, it should work just fine.
Cheers,
Jakub
___________________________________________________________________
Jakub Jelinek | jj@sunsite.mff.cuni.cz | http://sunsite.mff.cuni.cz
Administrator of SunSITE Czech Republic, MFF, Charles University
___________________________________________________________________
UltraLinux | http://ultra.linux.cz/ | http://ultra.penguin.cz/
Linux version 2.2.5 on a sparc64 machine (3958.37 BogoMips)
___________________________________________________________________
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~1999-04-09 16:32 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
1999-04-09 0:48 1.1.9 net boot failer on E3500 Marty Lucich
1999-04-09 1:01 ` David Miller
1999-04-09 16:32 ` Jakub Jelinek
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.