* Boot on AXMp is failing
@ 1999-09-17 18:08 Brent Jay Thorpe
1999-09-18 1:44 ` David S. Miller
1999-09-18 7:37 ` Jakub Jelinek
0 siblings, 2 replies; 3+ messages in thread
From: Brent Jay Thorpe @ 1999-09-17 18:08 UTC (permalink / raw)
To: ultralinux
IHAC who asks:
cdrom(Red Hat 6.0 Linux)Boot on AXMp is failing with the
following error
message:
UGH: property for adc was 8,need < 1
Pl let me know if you have any idea to resolve this problem.
I apreciate your help.
Thanks,
Not sure what the problem is. Any help would be appreciated
Thanks
Brent
^ permalink raw reply [flat|nested] 3+ messages in thread* Re: Boot on AXMp is failing
1999-09-17 18:08 Boot on AXMp is failing Brent Jay Thorpe
@ 1999-09-18 1:44 ` David S. Miller
1999-09-18 7:37 ` Jakub Jelinek
1 sibling, 0 replies; 3+ messages in thread
From: David S. Miller @ 1999-09-18 1:44 UTC (permalink / raw)
To: ultralinux
Date: Fri, 17 Sep 1999 14:08:05 -0400
From: Brent Jay Thorpe <brent.thorpe@sun.com>
IHAC who asks:
cdrom(Red Hat 6.0 Linux)Boot on AXMp is failing with the
following error
message:
UGH: property for adc was 8,need < 1
Not sure what the problem is. Any help would be appreciated
Yep, unfortunately the use nonstandard properties for some of the
environmental control devices behind EBUS in AX* systems, and since
we wouldn't know how to handle these parameters we fail instead of
crashing the system.
Without access to such a system I cannot provide a "safe" workaround.
This is peculiar report in that an AXmp system I temporarily had
worked fine, this must be a newer revision of the board because this
reported failure case did not exist with the AXmp board I tested on
several months ago and the relevant pieces of the kernel have not
been changed in the meantime.
Later,
David S. Miller
davem@redhat.com
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: Boot on AXMp is failing
1999-09-17 18:08 Boot on AXMp is failing Brent Jay Thorpe
1999-09-18 1:44 ` David S. Miller
@ 1999-09-18 7:37 ` Jakub Jelinek
1 sibling, 0 replies; 3+ messages in thread
From: Jakub Jelinek @ 1999-09-18 7:37 UTC (permalink / raw)
To: ultralinux
On Fri, Sep 17, 1999 at 06:44:34PM -0700, David S. Miller wrote:
> Date: Fri, 17 Sep 1999 14:08:05 -0400
> From: Brent Jay Thorpe <brent.thorpe@sun.com>
>
> IHAC who asks:
>
>
> cdrom(Red Hat 6.0 Linux)Boot on AXMp is failing with the
> following error
> message:
>
> UGH: property for adc was 8,need < 1
>
>
> Not sure what the problem is. Any help would be appreciated
>
> Yep, unfortunately the use nonstandard properties for some of the
> environmental control devices behind EBUS in AX* systems, and since
> we wouldn't know how to handle these parameters we fail instead of
> crashing the system.
Actually if you could send us output of
prtconf -pv
on Solaris, we could see if there is some obvious solution.
But the last AXmp I looked at had the PROM tree really broken in lots of
places (as bad as some JavaStations).
Cheers,
Jakub
___________________________________________________________________
Jakub Jelinek | jj@sunsite.mff.cuni.cz | http://sunsite.mff.cuni.cz
Administrator of SunSITE Czech Republic, MFF, Charles University
___________________________________________________________________
UltraLinux | http://ultra.linux.cz/ | http://ultra.penguin.cz/
Linux version 2.3.18 on a sparc64 machine (1343.49 BogoMips)
___________________________________________________________________
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~1999-09-18 7:37 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
1999-09-17 18:08 Boot on AXMp is failing Brent Jay Thorpe
1999-09-18 1:44 ` David S. Miller
1999-09-18 7:37 ` Jakub Jelinek
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.