* Re: 2.5.51 ide module problem
From: Jeff Chua @ 2002-12-11 7:07 UTC (permalink / raw)
To: Adam J. Richter; +Cc: jchua, linux-kernel
In-Reply-To: <200212110650.WAA13780@adam.yggdrasil.com>
On Tue, 10 Dec 2002, Adam J. Richter wrote:
> >depmod will ecounter "Segmentation fault" if the ide.ko and ide-io.ps
> >modules are in /lib/modules/2.5.51/kernel
>
> I think the new depmod recurses infinitely when it encounters
> circular dependencies. It eventually segfaults and leaves a huge
> modules.dep file from the infinite loop. If you look at the final
> huge line in that file, you can see where the loop occurred.
>
> depmod has no need to do any recursion, since it only needs
> to determine the immediate dependencies of each module. However,
> noticing such loops and printing them out would be a handy feature.
>
> I use IDE as a module, but I had to change the Makefile to
> build a big ide-mod.o from most of the core objects rather than
> allowing each one to be its own module. I believe I posted IDE
> modularization patches at least once a couple of months ago, but it
> seems to have fallen between the cracks. I could repost it if need
> be
Yes, please, send me your patch. I hope this patch works for
module-init-tools-0.9.3
>, although I have not yet booted 2.5.51.
I had same problem with pre 2.5.51. With 2.5.51, kernel now boot and I'm
able to get login prompt using ramdisk. Only catch is I've to specify
root=/dev/ram0 instead of /dev/ram for it to boot.
Thanks,
Jeff.
>
> Also note that I have not used the in kernel-based module
> loader recently, as I have been patching my kernels to use the user
> level module code. I am planning to try the kernel-base module loader
> in 2.5.51 once I fix other problems it has finding the root device
> under devfs. So, it's remotely possible that you may also see module
> problems that I've missed.
>
> Adam J. Richter __ ______________ 575 Oroville Road
> adam@yggdrasil.com \ / Milpitas, California 95035
> +1 408 309-6081 | g g d r a s i l United States of America
> "Free Software For The Rest Of Us."
>
^ permalink raw reply
* Re: ACPI trouble (AC module, etc.) with Toshiba 1115-S103
From: NoZizzing OrDripping @ 2002-12-11 6:58 UTC (permalink / raw)
To: Ducrot Bruno; +Cc: acpi-devel-5NWGOfrQmneRv+LV9MX5uipxlwaOVQ5f
In-Reply-To: <20021210092357.GA29390-j6u/t2rXLliUoIHC/UFpr9i2O/JbrIOy@public.gmane.org>
[-- Attachment #1: Type: text/plain, Size: 2065 bytes --]
--- Ducrot Bruno <ducrot-kk6yZipjEM5g9hUCZPvPmw@public.gmane.org> wrote:
> On Mon, Dec 09, 2002 at 10:59:22PM -0800, NoZizzing
> OrDripping wrote:
> >
> > Status report for Toshiba Satellite 1115-S103
> laptop....
> >
> > $ root modprobe ac; dmesg
> >
> > exfldio-0122 [31] Ex_setup_region : Field
> [ACPW] Base+Offset+Width 38+0+4 is beyond end of
> region [GPIO] (length 3B)
> > psparse-1103: *** Error: Method execution failed
> [\_SB_.PCI0.LPCB.ACAD._PSR] (Node c1671948),
> AE_AML_REGION_LIMIT
> > acpi_ac-0083 [15] acpi_ac_get_state : Error
> reading AC Adapter state
> >
>
> Known issue with most of the Toshiba Satellite
> series with a Phoenix
> BIOS. I guess that Toshiba (or in fact Compal)
> still don't
> know how to debug correctly their ASLs.
>
> You need a patched DSDT for this model. Please send
> me your DSDT.
OK, I went thru the process of creating a modified
ASL (diffs from the original attached) for this
laptop.
Basically, I cleaned up the original so that the
errors
from "iasl" went away.
I now have a working AC module.
This is a stopgap measure though, correct? The goal
should be for the Linux kernel to support the existing
AML in flash (the AML apparently comes from Microsoft)
on these laptops. The BIOS on these machines is about
as fresh as it gets (Nov, 2002). It seems to me that
the Intel ASL compiler and interpreter needs to be
changed/relaxed to accomodate what has become a
defacto
(de-gates-o) standard here.
As a practical matter, I can't imagine non-programmer
types having to modify their ASL code to make Linux
work on their laptops, and I can't imagine that Ducrot
wants to be the single, worldwide point, for modified
ASL code.
Would the ACPI developers be receptive if I made the
changes necessary to allow the kernel ACPI code to
accept the existing AML in my laptop as-is?
-Rick Richardson
rickr-EySxSuIQeMUAvxtiuMwx3w@public.gmane.org
__________________________________________________
Do you Yahoo!?
Yahoo! Mail Plus - Powerful. Affordable. Sign up now.
http://mailplus.yahoo.com
[-- Attachment #2: tosh1115-s103.asl.diff --]
[-- Type: application/octet-stream, Size: 6139 bytes --]
--- tosh1115-s103-orig.asl 2002-12-11 00:27:03.000000000 -0600
+++ tosh1115-s103-linux.asl 2002-12-11 00:27:41.000000000 -0600
@@ -1,4 +1,4 @@
-
+/*
AD - ACPI Dump. Version 0.91. Jan 09 2002
Copyright (C) 2001 by Phoenix Technologies, Ltd. All Rights Reserved.
@@ -13,7 +13,7 @@
Creator ID: 'MSFT'
Creator Revision: 0x0100000D
-
+*/
DefinitionBlock("DSDT.AML","DSDT",1,"TOSCPL","BTK20 ",0x6040000)
{
OperationRegion(PORT,SystemIo,0x80,0x01)
@@ -408,6 +408,7 @@
\_SB.PCI0.LPCB.PHSS(0x0F)
}
}
+ Return(Package(2) {0, 0})
}
Scope(_GPE)
{
@@ -624,7 +625,7 @@
FTT,1
}
OperationRegion(ECR,EmbeddedControl,0x00,0xFF)
- Field(ECR /* \_SB.EPWR.ECR */,AnyAcc,Lock,Preserve)
+ Field(ECR /* \_SB.EPWR.ECR */,/*RER AnyAcc*/ByteAcc,Lock,Preserve)
{
Offset(0x9E),
,4,
@@ -684,14 +685,14 @@
}
Method(BATC,1,NotSerialized)
{
- Divide(0x0FA0,0x64,,Local1)
+ Divide(0x0FA0,0x64,Local1)
If(LEqual(Arg0,0x00))
{
- Divide(\_SB.PCI0.LPCB.EC0.BRC0,Local1,,Local2)
+ Divide(\_SB.PCI0.LPCB.EC0.BRC0,Local1,Local2)
}
Else
{
- Divide(\_SB.PCI0.LPCB.EC0.BRC1,Local1,,Local2)
+ Divide(\_SB.PCI0.LPCB.EC0.BRC1,Local1,Local2)
}
Return(Local2)
}
@@ -770,14 +771,14 @@
}
Method(BAT0,0,NotSerialized)
{
- Divide(0x0FA0,0x64,,Local1)
- Divide(\_SB.PCI0.LPCB.EC0.BRC0,Local1,,Local2)
+ Divide(0x0FA0,0x64,Local1)
+ Divide(\_SB.PCI0.LPCB.EC0.BRC0,Local1,Local2)
Return(Local2)
}
Method(BAT1,0,NotSerialized)
{
Multiply(\_SB.PCI0.LPCB.EC0.BRC1,0x64,Local1)
- Divide(Local1,0x1194,,Local2)
+ Divide(Local1,0x1194,Local2)
Return(Local2)
}
Method(ISTA,1,NotSerialized)
@@ -1733,7 +1734,7 @@
// properly
// [4] 1 = Device is attached
//
-[31:5] Reserved.
+//[31:5] Reserved.
//
{
\_SB.PCI0.LPCB.PHSS(0x0C)
@@ -1877,7 +1878,7 @@
// properly
// [4] 1 = Device is attached
//
-[31:5] Reserved.
+//[31:5] Reserved.
//
{
Store("LCD --_DCS",Debug)
@@ -2011,7 +2012,7 @@
// properly
// [4] 1 = Device is attached
//
-[31:5] Reserved.
+//[31:5] Reserved.
//
{
\_SB.PCI0.LPCB.PHSS(0x0C)
@@ -2218,7 +2219,7 @@
Store(One,TVAA /* \_SB.PCI0.AGPB.VGA.TVAA */)
}
// Notify 0x80 -
- **** unknown object notifiation value
+// **** unknown object notifiation value
Notify(\_SB.PCI0.AGPB.VGA,0x80)
}
}
@@ -2736,7 +2737,7 @@
PMEE,1,
US3E,1
}
- OperationRegion(GPIO,SystemIo,0x1180,0x3B)
+ OperationRegion(GPIO,SystemIo,0x1180,/*RER 0x3B*/ 0x3C)
Field(GPIO /* \_SB.PCI0.LPCB.GPIO */,WordAcc,Lock,Preserve)
{
AccessAs(DWordAcc,0x00),
@@ -7267,7 +7268,7 @@
}
}
OperationRegion(ERAM,EmbeddedControl,0x00,0xFF)
- Field(ERAM /* \_SB.PCI0.LPCB.EC0.ERAM */,AnyAcc,Lock,Preserve)
+ Field(ERAM /* \_SB.PCI0.LPCB.EC0.ERAM */,/*RER AnyAcc*/ByteAcc,Lock,Preserve)
{
Offset(0x2E),
RSMT,16,
@@ -7379,7 +7380,7 @@
PHSS /* \_SB.PCI0.LPCB.PHSS */(0x08)
Store(0x00,\_SB.PCI0.LPCB.EC0.BRGT)
// Notify 0x81 -
- **** unknown object notifiation value
+// **** unknown object notifiation value
Notify(EPWR /* \_SB.EPWR */,0x81)
}
}
@@ -7423,7 +7424,7 @@
}
Store(0x00,\_SB.PCI0.LPCB.EC0.SKEY)
// Notify 0x82 -
- **** unknown object notifiation value
+// **** unknown object notifiation value
Notify(EPWR /* \_SB.EPWR */,0x82)
}
}
@@ -7474,7 +7475,7 @@
TSTS,1
}
OperationRegion(ECRM,EmbeddedControl,0x00,0xFF)
- Field(ECRM /* \_SB.PCI0.LPCB.EC0.ECRM */,AnyAcc,Lock,Preserve)
+ Field(ECRM /* \_SB.PCI0.LPCB.EC0.ECRM */,/*RER AnyAcc*/ByteAcc,Lock,Preserve)
{
Offset(0xAE),
PTVL,3,
@@ -8317,6 +8318,7 @@
Return(Buffer(0x14){0x78,0x00,0x00,0x00,0x08,0x00,0x00,0x00,
0x78,0x00,0x00,0x00,0x08,0x00,0x00,0x00,
0x1F,0x00,0x00,0x00})
+ /* RER: Warning here is OK */
Name(PBUF,Buffer(0x14){0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00})
^ permalink raw reply
* RE: EP7312 can't use 32MB DRAM
From: shadow @ 2002-12-10 19:43 UTC (permalink / raw)
To: linux-mtd
In-Reply-To: <Pine.LNX.4.44.0212100420450.14112-100000@structure.biochem.nchu.edu.tw>
This is my ksymoops extract.
>>EIP; c0055804 <kmem_cache_grow+1ac/4a8> <=====
>>r10; c0031154 <__arm720_proc_info+0/0>
Trace; c005565c <kmem_cache_grow+4/4a8>
Trace; c0055fb8 <kmalloc+200/240>
Trace; c0055dbc <kmalloc+4/240>
Trace; c007dac0 <proc_create+80/c4>
Trace; c007da3c <proc_kill_inodes+ac/b0>
Trace; c007dccc <create_proc_entry+74/b8>
Trace; c007dc54 <proc_mkdir+64/68>
Trace; c002dd48 <proc_misc_init+40/180>
Trace; c002dd08 <proc_misc_init+0/180>
Trace; c002dbb8 <proc_root_init+54/f0>
Trace; c002db64 <proc_root_init+0/f0>
Trace; c0028644 <start_kernel+fc/144>
Trace; c0028548 <start_kernel+0/144>
Trace; c0028080 <__mmap_switched+0/30>
Code; c00557f4 <kmem_cache_grow+19c/4a8>
00000000 <_EIP>:
Code; c00557f4 <kmem_cache_grow+19c/4a8>
0: 81 30 83 e0 03 41 xorl $0x4103e083,(%eax)
Code; c00557fa <kmem_cache_grow+1a2/4a8>
6: 82 (bad)
Code; c00557fb <kmem_cache_grow+1a3/4a8>
7: e0 18 loopne 21 <_EIP+0x21> c0055815
<kmem_cache_grow+1bd/4a8>
Code; c00557fd <kmem_cache_grow+1a5/4a8>
9: 02 9f e5 e2 a5 ff add 0xffa5e2e5(%edi),%bl
Code; c0055803 <kmem_cache_grow+1ab/4a8> <=====
f: eb 00 jmp 11 <_EIP+0x11> c0055805
<kmem_cache_grow+1ad/4a8> <=====
Code; c0055805 <kmem_cache_grow+1ad/4a8>
11: 50 push %eax
Code; c0055806 <kmem_cache_grow+1ae/4a8>
12: 84 e5 test %ah,%ch
Kernel panic: Attempted to kill the idle task!
Any suggestion would be greatly appreciated.
Brian
On Tue, 10 Dec 2002, shadow wrote:
>
>
> ---------- Forwarded message ----------
> Date: Mon, 9 Dec 2002 23:29:19 +0800 (CST)
> From: shadow <saturn@structure.biochem.nchu.edu.tw>
> To: PA Nilsson <pa@glaze.se>
> Subject: RE: EP7312 can't use 32MB DRAM
>
> Thanks for your suggestion.
> I had modified my source code but still can not work.
> mi->bank[0].start = 0xc0000000;
> mi->bank[0].size = 32*1024*1024;
> mi->bank[0].node = 0;
> mi->nr_banks = 1;
>
> I also rewrited my bootloader(hermit), in the linux.c, I specified
> page_size, page_number, page_number_in_bank.
>
> /* system page size */
> ps->u1.s.page_size = 0x1000;
> /* number of pages in all banks */
> ps->u1.s.nr_pages = 8192;
> /* pages per bank */
> ps->u1.s.pages_in_bank[0] = 8192;
>
>
> In hermit's boot.S, I reconfigured the SDRAM size, 32MB.
>
> mov r1, #0x42 /* 32MB */
> add r1, r1, #0x0500
> mov r2, #0x2300
> add r2, r2, r0
> str r1, [r2]
>
> mov r1, #0x240 /* 36MHz SDRAM refresh period */
> mov r2, #0x2340
> add r2, r2, r0
> str r1, [r2]
>
> I wonder the above initial code of SDRAM, if it is also needed by linux
> kernel's boot.S or it only needed to executed once at the bootloader ?
>
> Sadly, it still can not work after the above course.
> Any suggestion would be greatly appreciated.
>
> Thanks in advance,
> Brian
>
>
>
> On Thu, 5 Dec 2002, PA Nilsson wrote:
>
> > Since I am a hardware designer, software is not my strongest side but this
> > might help you.
> >
> > You do not write anything about what board you are running on, but here is
> > one possibility why your code might crash:
> >
> > If your board is set up with two 16-bit wide DRAMs to form a 32-bit wide
> > bus, all of your memory will be located in the same bank, not over both
> > banks. That would mean that you should only configure one bank, but twice
> > the size.
> >
> > Make sure that you have set up your DRAM-controller in your bootloader
> > aswell, depending on the physical layout on the board.
> >
> > /PA
> >
>
>
>
>
> ______________________________________________________
> Linux MTD discussion mailing list
> http://lists.infradead.org/mailman/listinfo/linux-mtd/
>
^ permalink raw reply
* Re: IDE feature request & problem
From: Milan Roubal @ 2002-12-11 7:02 UTC (permalink / raw)
To: Milton D. Miller II; +Cc: linux-kernel
In-Reply-To: <200212110626.gBB6Qvt37089@sullivan.realtime.net>
Hi,
its only once in log - then the software raid made
that disk fail and removed from the array:
Nov 28 17:54:24 fileserver kernel: raid5: Disk failure on hdn1, disabling
device. Operation continuing on 8 devices
I don't want anymore disabled drive, that is good.
Thanx Milan
----- Original Message -----
From: "Milton D. Miller II" <miltonm@realtime.net>
To: "Milan Roubal" <roubm9am@barbora.ms.mff.cuni.cz>
Cc: <linux-kernel@vger.kernel.org>
Sent: Wednesday, December 11, 2002 7:26 AM
Subject: Re: IDE feature request & problem
> (Barry pointed out the errors are all 7F.)
>
> And the sector LBA is hex 808087F7F7F (high 80808 low 7f7f7f)
>
> do you get this repeatedly?
>
> milton
^ permalink raw reply
* Re: 2.5.51 ide module problem
From: Adam J. Richter @ 2002-12-11 6:50 UTC (permalink / raw)
To: jchua; +Cc: linux-kernel
>depmod will ecounter "Segmentation fault" if the ide.ko and ide-io.ps
>modules are in /lib/modules/2.5.51/kernel
I think the new depmod recurses infinitely when it encounters
circular dependencies. It eventually segfaults and leaves a huge
modules.dep file from the infinite loop. If you look at the final
huge line in that file, you can see where the loop occurred.
depmod has no need to do any recursion, since it only needs
to determine the immediate dependencies of each module. However,
noticing such loops and printing them out would be a handy feature.
I use IDE as a module, but I had to change the Makefile to
build a big ide-mod.o from most of the core objects rather than
allowing each one to be its own module. I believe I posted IDE
modularization patches at least once a couple of months ago, but it
seems to have fallen between the cracks. I could repost it if need
be, although I have not yet booted 2.5.51.
Also note that I have not used the in kernel-based module
loader recently, as I have been patching my kernels to use the user
level module code. I am planning to try the kernel-base module loader
in 2.5.51 once I fix other problems it has finding the root device
under devfs. So, it's remotely possible that you may also see module
problems that I've missed.
Adam J. Richter __ ______________ 575 Oroville Road
adam@yggdrasil.com \ / Milpitas, California 95035
+1 408 309-6081 | g g d r a s i l United States of America
"Free Software For The Rest Of Us."
^ permalink raw reply
* Re: from intel onboard Lan and audo to install 2.4.50
From: eric lin @ 2002-12-11 14:59 UTC (permalink / raw)
To: Rob Weir; +Cc: debian-user, linux-kernel
In-Reply-To: <20021210152801.GB25341@thebox.home.local>
>
>>some say newest kernel 2.5.50 can solve all above hardware(intel board
>>on board LAN and audio ) problem, so I download full tar.gz, choose what
>>my hardware fit
>>make install
>
>
> Use make-kpkg in the kernel-package package.
I did,
but it terminate with error
gcc -Wp,-MD,drivers/pci/.quirks.o.d -D__KERNEL__ -Iinclude -Wall
-Wstrict-prototypes -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common
-fomit-frame-pointer -pipe -mpreferred-stack-boundary=2 -march=i686
-Iarch/i386/mach-generic -Iarch/i386/mach-defaults -nostdinc
-iwithprefix include -DKBUILD_BASENAME=quirks -DKBUILD_MODNAME=quirks
-c -o drivers/pci/quirks.o drivers/pci/quirks.c
drivers/pci/quirks.c: In function `quirk_ioapic_rmw':
drivers/pci/quirks.c:354: `sis_apic_bug' undeclared (first use in this
function)
drivers/pci/quirks.c:354: (Each undeclared identifier is reported only once
drivers/pci/quirks.c:354: for each function it appears in.)
make[3]: *** [drivers/pci/quirks.o] Error 1
make[2]: *** [drivers/pci] Error 2
make[1]: *** [drivers] Error 2
make[1]: Leaving directory `/home/fsshl/linux-2.5.50'
make: *** [stamp-build] Error 2
www:/home/fsshl/linux-2.5.50#
if someone know it be modifed, please drop me a note where I can get the
fixed source.
it's on 2.5.50.ac-1 patched 2.5.50 from kernel.org
hihgly apprecaite
>
>
>>error happen, I justify one of it, first one, in
>>linux-2.4.50/include/asm-i386/io_apic.h
>>containing sis_apic_bug not include its .h file
>
>
> As Colin already said, if you can't handle this, you shouldn't be using
> 2.5 kernels. Some of them don't build, and many (most) have serious
> bugs that could cause data loss. If you want to go ahead with this,
> you'll have to get help from lkml, but be prepared to be thoroughly
> roasted.
>
>
>>also I have difficult(unsuccess) patch 2.5.50
>>I did
>>gzip -cd patch-2.5.50-ac1.gz | patch -p0
>
> ^
> s/0/1/
>
> -rob
--
Sincere Eric
www.linuxspice.com
linux pc for sale
^ permalink raw reply
* Using reverse mapping in 2.5.51 for suspend-to-disk.
From: Nigel Cunningham @ 2002-12-11 6:44 UTC (permalink / raw)
To: Linux Memory Management List (E-mail)
Hi all.
Let me begin by saying I'm quite new to kernel hacking, and will freely
admit that I've lots still to learn. Please, therefore, cut me some slack if
I show previously unsurpassed ignorance!
First, some background:
I've done some work on the suspend-to-disk code in the 2.4 series kernels.
The mainstream suspend-to-disk code in 2.4 essentially eats all the memory
it can, makes a copy of the remainder, and writes that copy to disk. I
prepared a version that eats far less memory and writes a bigger image,
thereby resulting in a more responsive system on resume (although it takes
longer to read). The target, of course is to eat [virtually] no memory at
all and store as close to a perfect image as possible. To get closer to
that, I implemented a crude reverse mapping (assuming I understand the term
correctly) which makes a bitmap of pages ('pageset 1') that are only used by
processes which have been stopped (ie processes not needed for writing the
image), writes the contents of those pages to disk and then copies and saves
the remaining pages ('pageset 2') using pageset1 pages and free memory. It
works well, and will probably work better once I put it in a kernel where
drivers are properly quiesced!
Which brings me to my question. I want to start trying to get this going in
a 2.5 kernel, and have seen people talking about reverse-mapping patches for
a while now. I'm wondering if you have managed or are preparing to merge
such patches into the 2.5 series, whether they would be helpful to me in
identifying those pageset1 pages. If so, how I use them.
Of course you might want to bag the whole method in general :> I'll happily
try to implement a better method if you suggestion one!
Regards and thanks in advance,
Nigel
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/
^ permalink raw reply
* Re: question
From: Robert Love @ 2002-12-11 6:46 UTC (permalink / raw)
To: Sipos Ferenc; +Cc: linux-kernel
In-Reply-To: <1039588506.1082.1.camel@zeus.city.tvnet.hu>
On Wed, 2002-12-11 at 01:35, Sipos Ferenc wrote:
> Is the new atapi cd writing method included into the 2.4 backported ac
> ide code or is it separate, if it is, then will it be ported to 2.4?
No it is not in 2.4 nor 2.4-ac.
I doubt it will be back-ported but who knows. Linus and Jens would know
best. And Marcelo would have to take it.
Robert Love
^ permalink raw reply
* Re: [PATCH] epoll: don't printk pointer value
From: Robert Love @ 2002-12-11 6:45 UTC (permalink / raw)
To: Andrew Morton; +Cc: William Lee Irwin III, davidel, linux-kernel
In-Reply-To: <3DF6DE1A.6FD498C9@digeo.com>
On Wed, 2002-12-11 at 01:41, Andrew Morton wrote:
> Guys, it's noise. Just nuke it.
So I would prefer...
Robert Love
fs/eventpoll.c | 2 --
1 files changed, 2 deletions(-)
diff -urN linux-2.5.51/fs/eventpoll.c linux/fs/eventpoll.c
--- linux-2.5.51/fs/eventpoll.c 2002-12-09 21:45:54.000000000 -0500
+++ linux/fs/eventpoll.c 2002-12-11 01:43:59.000000000 -0500
@@ -1573,8 +1573,6 @@
if (IS_ERR(eventpoll_mnt))
goto eexit_4;
- printk(KERN_INFO "[%p] eventpoll: successfully initialized.\n", current);
-
return 0;
eexit_4:
^ permalink raw reply
* Re: [PATCH] epoll: don't printk pointer value
From: Andrew Morton @ 2002-12-11 6:41 UTC (permalink / raw)
To: Robert Love; +Cc: William Lee Irwin III, davidel, linux-kernel
In-Reply-To: <1039588429.832.6.camel@phantasy>
Robert Love wrote:
>
> ...
> --- linux-2.5.51/fs/eventpoll.c 2002-12-09 21:45:54.000000000 -0500
> +++ linux/fs/eventpoll.c 2002-12-11 01:23:07.000000000 -0500
> @@ -1573,7 +1573,7 @@
> if (IS_ERR(eventpoll_mnt))
> goto eexit_4;
>
> - printk(KERN_INFO "[%p] eventpoll: successfully initialized.\n", current);
> + printk(KERN_INFO "eventpoll: successfully initialized.\n");
>
Guys, it's noise. Just nuke it.
^ permalink raw reply
* Re: [parisc-linux] Kernel crash when loggin in via ssh
From: Carlos O'Donell @ 2002-12-11 6:33 UTC (permalink / raw)
To: M. Grabert; +Cc: parisc-linux
In-Reply-To: <Pine.LNX.4.44.0212110410060.6654-100000@sal.ucc.ie>
> Reading my previous post about the change in the Voodoo3 issue (Nov 26),
> I realized that linux-2.4.20-rc1-pa7 obviously also worked.
> This kernel was definitely compiled with gcc-3.0.4 (the one that
> was in sid as of Nov 26).
>
> Yes, it might be a gcc issue ... haven't thought of that ...
> I'll try to recompile the latest kernel with a gcc-3.0.4 - tomorrow!
So the urban legend goes that gcc-3.2 compiled kernels may infact
produce mildly incorrect results in the networking code.
I have yet to verify this, and JDA seems to indicate that he has working
kernels with gcc-3.2. While I've only recently tested gcc-3.0.x and
gcc-3.1.x based compiles.
I don't like urban legends >:} *Added item to Chrismas todo list*
c.
^ permalink raw reply
* Re: xxx_check_var
From: James Simmons @ 2002-12-11 6:32 UTC (permalink / raw)
To: Benjamin Herrenschmidt; +Cc: Paul Mackerras, linux-kernel, linux-fbdev-devel
In-Reply-To: <1039562028.3373.32.camel@zion>
> > When I look at atyfb_check_var or aty128fb_check_var, I see that they
> > will alter the contents of *info->par. Isn't this a bad thing? My
>
> Yes, this wrong, and afaik, it's your original port to 2.5 that did that
> ;)
Yeap. The idea of check_var is to validate a mode. Note modedb uses just
check_var. It is okay to READ the values in your par. You shouldn't alter
the values in par.
> > understanding was that after calling check_var, you don't necessarily
> > call set_par next (particularly if check_var returned an error).
Correct. Check_var is always called. Now if you wanted to just test a mode
via userland with the FB_ACTIVATE_TEST flag then only fb_check_var is
called. If you pass in FB_ACTIVATE_NOW then both fb_check_var and
fb_set_par will be called. Fb_set_par actually sets the hardware state.
> > Also I notice that atyfb_set_par and aty128fb_set_par don't look at
> > info->var, they simply set the hardware state based on the contents of
> > *info->par.
>
> Which is wrong too indeed
Actually you can look at info->var. Info->var has been validated so it can
be trusted. You don't need to stuff everything into par. You DO need to
change info->fix if the hardware state has changed.
> > Looking at skeletonfb.c, it seems that this is the wrong behaviour. I
> > had fixed the aty128fb.c driver in the linuxppc-2.5 tree. James, if
> > you let me know whether the current behaviour is wrong or not, I'll
> > fix them and send you the patch.
I hope me input helped.
BTW docs are on the way. I will work with Steven Luther on this the next
couple of days.
> I _think_ my radeonfb (in linuxppc-2.5) is right in this regard too.
> Look at the initialization too, iirc, you had some non necessary stuff
> in there (calling gen_set_disp, gen_set_var is plenty enough).
You go the logic down.
P.S
For the pmu_sleep_notifier can you pass in a specific struct fb_info or
do you need to make a list of all of them?
^ permalink raw reply
* RE: boot sequence
From: Joseph D. Wagner @ 2002-12-11 6:30 UTC (permalink / raw)
To: 'dave', 'linux-newbie'
In-Reply-To: <200212101157.15232.dave@dpomeroy.com>
This is a discussion for a Mandrake mailing list, not the Linux kernel.
-----Original Message-----
From: linux-newbie-owner@vger.kernel.org
[mailto:linux-newbie-owner@vger.kernel.org] On Behalf Of dave
Sent: Tuesday, December 10, 2002 1:57 PM
To: linux-newbie
Subject: boot sequence
I'm having a problem with MySQL starting on boot and I don't quit understand
the boot sequence of Mandrake 9.0. What files get executed and where they
are located. Anyone have a link to a writeup about this? Thanks for your
time.
Dave Pomeroy K7DNP SouthWestern Washington
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs
-
To unsubscribe from this list: send the line "unsubscribe linux-newbie" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.linux-learn.org/faqs
^ permalink raw reply
* Re: [PATCH] epoll: don't printk pointer value
From: Robert Love @ 2002-12-11 6:33 UTC (permalink / raw)
To: William Lee Irwin III; +Cc: davidel, linux-kernel
In-Reply-To: <20021211063031.GH9882@holomorphy.com>
On Wed, 2002-12-11 at 01:30, William Lee Irwin III wrote:
> You're still passing current as an argument to the printk.
Ah crap. That is what I get for not testing it... nothing is too
trivial, boys and girls.
Thanks, Bill.
Robert Love
fs/eventpoll.c | 2 +-
1 files changed, 1 insertion(+), 1 deletion(-)
diff -urN linux-2.5.51/fs/eventpoll.c linux/fs/eventpoll.c
--- linux-2.5.51/fs/eventpoll.c 2002-12-09 21:45:54.000000000 -0500
+++ linux/fs/eventpoll.c 2002-12-11 01:23:07.000000000 -0500
@@ -1573,7 +1573,7 @@
if (IS_ERR(eventpoll_mnt))
goto eexit_4;
- printk(KERN_INFO "[%p] eventpoll: successfully initialized.\n", current);
+ printk(KERN_INFO "eventpoll: successfully initialized.\n");
return 0;
^ permalink raw reply
* question
From: Sipos Ferenc @ 2002-12-11 6:35 UTC (permalink / raw)
To: linux-kernel
Hi!
Is the new atapi cd writing method included into the 2.4 backported ac
ide code or is it separate, if it is, then will it be ported to 2.4?
Thx.
Paco
^ permalink raw reply
* Re: MySQL or postgreSQL which is the best?
From: Michael French @ 2002-12-11 6:25 UTC (permalink / raw)
To: lisa leblanc, linux-admin
In-Reply-To: <F169DEt6kDzyDpTCGab00007bf2@hotmail.com>
Depends on what you want to do. Are you look to do something with
mostly reads and few writes, an even mix, or mostly writes? For speed, you
can't beat MySQL so if you are going to be doing mostly reads (like a web
site), it works great. For an application with a fair bit of writes, I
would go with Postgres just because it has some more advances features and
tends to scale better. I know that Postgres just released a new version 7.3
(http://www.us.postgresql.org/) recently that is supposed to be pretty
slick. MySQL has also fully integrated the InnoDB code which adds truly
ACID compliant transactions to MySQL as well as some other features. They
are getting pretty close in features, but I would still seperate them by
speed and scalability. I don't have a great deal of experience with either,
but at my last job we used MySQL to run our entire web site (a newspaper)
and never had any problems with it, even without the new feature set. It
was mostly reads though, but very fast. I put a couple of links in below.
First one is a comparison chart from a year ago. Probably changed a little
bit, but will give you a good idea. Second one is a Slashdot discussion on
the topic, see what others had to say. Last is the link to MySQL's site for
the new 4.0 version and descriptions of the new features in the different
flavors.
http://phd.pp.ru/Software/SQL/PostgreSQL-vs-MySQL.html
http://slashdot.org/articles/02/09/23/1652243.shtml?tid=136
Cheers,
Michael French
----- Original Message -----
From: "lisa leblanc" <pinguinlinux@hotmail.com>
To: <linux-admin@vger.kernel.org>
Sent: Tuesday, December 10, 2002 10:00 PM
Subject: MySQL or postgreSQL which is the best?
> I have to choose between these databases and I do not know which is the
> best. What do you think?
> Lisa
>
>
>
>
>
> _________________________________________________________________
> The new MSN 8: smart spam protection and 2 months FREE*
> http://join.msn.com/?page=features/junkmail
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-admin" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
^ permalink raw reply
* [linux-lvm] 2.5.51-dm-1
From: Joe Thornber @ 2002-12-11 6:24 UTC (permalink / raw)
To: linux-lvm, lvm-devel
A new stable release of dm for 2.5.51 is available:
http://people.sistina.com/~thornber/patches/2.5-stable/2.5.51/
Changes
-------
Revision 1:
Four constants:
DM_DIR,
DM_MAX_TYPE_NAME,
DM_NAME_LEN,
DM_UUID_LEN
Were being declared in device-mapper.h, these are all specific to
the ioctl interface, so they've been moved to dm-ioctl.h. Nobody
in userland should ever include <linux/device-mapper.h> so remove
ifdef __KERNEL guards.
Revision 2:
An error value was not being checked correctly in open_dev().
[Kevin Corry]
Revision 3:
Return -ENOTBLK if lookup_device() finds the inode, but it
is not a block device. [Cristoph Hellwig]
Revision 4:
No need to validate the parameters if we are doing a
REMOVE_ALL command.
Revision 5:
check_device_area was comparing the bytes with sectors.
[Stefan Lauterbach]
Revision 6:
minor change for dm-strip.c. Tests for correct chunksize before it allocates
the stripe context. [Heinz Mauelshagen]
Revision 7:
There's a bug in the dm-stripe.c constructor failing top check if enough
destinations are handed in. [Heinz Mauelshagen]
Revision 8:
Give each device its own io mempool to avoid a potential
deadlock with stacked devices. [HM + EJT]
Revision 9:
queue_io() was checking the DMF_SUSPENDED flag rather than the new
DMF_BLOCK_IO flag. This meant suspend could deadlock under load.
Revision 10:
dm_suspend(): Stop holding the read lock around the while loop that
waits for pending io to complete.
Revision 11:
Add a blk_run_queues() call to encourage pending io to flush
when we're doing a dm_suspend().
Revision 12:
dec_pending(): only bother spin locking if io->error is going to be
updated. [Kevin Corry]
Revision 13:
md->pending was being incremented for each clone rather than just
once. [Kevin Corry]
Revision 14:
Some fields in the duplicated bio weren't being set up properly in
__split_page(). [Kevin Corry]
Revision 15:
Remove some paranoia in highmem.c, need to check this with Jens Axboe.
Revision 16:
Remove verbose debug message 'Splitting page'.
^ permalink raw reply
* Re: [PATCH] epoll: don't printk pointer value
From: William Lee Irwin III @ 2002-12-11 6:30 UTC (permalink / raw)
To: Robert Love; +Cc: davidel, linux-kernel
In-Reply-To: <1039588045.833.3.camel@phantasy>
On Wed, Dec 11, 2002 at 01:27:25AM -0500, Robert Love wrote:
> I really cannot think of a good reason why eventpoll_init() should print
> a pointer value to user-space - especially the value of current?
> I do not think this is good practice and someone might even consider it
> a security hole. Personally, I would prefer to remove the "successfully
> initialized" message altogether, but at the very least can we not print
> current's address?
You're still passing current as an argument to the printk.
Bill
^ permalink raw reply
* configuration options that lead to compile errors
From: Robert Schiele @ 2002-12-11 6:29 UTC (permalink / raw)
To: linux-kernel
[-- Attachment #1.1: Type: text/plain, Size: 2306 bytes --]
Hello.
During some testing efforts, I found some configuration options that
lead to compiler errors with 2.5.51 on i586 that I want to report
here. Most of them are not yet ported drivers. Note that you do not
need to give me hints or workarounds for those problems, I don't need
those drivers. I just report this to inform the maintainers about
existing problems. If you are the maintainer of a specified component
and can't reproduce the problem, feel free to ask me for more
information.
These are the configuration options that need to be switched off in
the attached .config file to make the kernel compile:
CONFIG_BLK_DEV_NFORCE
CONFIG_DEFXX
CONFIG_ESPSERIAL
CONFIG_FB_3DFX
CONFIG_FB_ATY
CONFIG_FB_ATY_CT
CONFIG_FB_ATY_GX
CONFIG_FB_CLGEN
CONFIG_FB_CYBER2000
CONFIG_FB_IMSTT
CONFIG_FB_MATROX
CONFIG_FB_MATROX_G100
CONFIG_FB_MATROX_G450
CONFIG_FB_MATROX_I2C
CONFIG_FB_MATROX_MAVEN
CONFIG_FB_MATROX_MILLENIUM
CONFIG_FB_MATROX_MULTIHEAD
CONFIG_FB_MATROX_MYSTIQUE
CONFIG_FB_PM2
CONFIG_FB_PM2_FIFO_DISCONNECT
CONFIG_FB_PM2_PCI
CONFIG_FB_PM3
CONFIG_FB_RADEON
CONFIG_FB_SIS
CONFIG_FB_SIS_300
CONFIG_FB_SIS_315
CONFIG_FB_TRIDENT
CONFIG_FB_VOODOO1
CONFIG_I2O_LAN
CONFIG_INTERMEZZO_FS
CONFIG_IPHASE5526
CONFIG_ISDN_DIVERSION
CONFIG_ISDN_X25
CONFIG_ISI
CONFIG_MTD_BLKMTD
CONFIG_PCMCIA_AHA152X
CONFIG_PCMCIA_FDOMAIN
CONFIG_PCMCIA_NINJA_SCSI
CONFIG_PCMCIA_QLOGIC
CONFIG_RCPCI
CONFIG_RISCOM8
CONFIG_SCSI_AM53C974
CONFIG_SCSI_DC390T
CONFIG_SCSI_DC390T_NOGENSUPP
CONFIG_SCSI_DPT_I2O
CONFIG_SCSI_EATA_DMA
CONFIG_SCSI_EATA_PIO
CONFIG_SCSI_GDTH
CONFIG_SCSI_INITIO
CONFIG_SCSI_NCR53C7xx
CONFIG_SCSI_NCR53C7xx_DISCONNECT
CONFIG_SCSI_NCR53C7xx_FAST
CONFIG_SCSI_NCR53C7xx_sync
CONFIG_SCSI_PCI2000
CONFIG_SCSI_PCI2220I
CONFIG_SOUND_CS4232
CONFIG_SOUND_OPL3SA2
CONFIG_SPECIALIX
CONFIG_SPECIALIX_RTSCTS
CONFIG_VENDOR_SANGOMA
CONFIG_VIDEO_BT848
CONFIG_VIDEO_SAA7134
CONFIG_VIDEO_STRADIS
CONFIG_VIDEO_ZORAN
CONFIG_VIDEO_ZORAN_BUZ
CONFIG_VIDEO_ZORAN_DC10
CONFIG_VIDEO_ZORAN_LML33
CONFIG_VIDEO_ZR36120
CONFIG_VLSI_FIR
CONFIG_WANPIPE_CHDLC
CONFIG_WANPIPE_FR
CONFIG_WANPIPE_MULTPPP
CONFIG_WANPIPE_PPP
CONFIG_WANPIPE_X25
Robert
--
Robert Schiele Tel.: +49-621-181-2517
Dipl.-Wirtsch.informatiker mailto:rschiele@uni-mannheim.de
[-- Attachment #1.2: .config --]
[-- Type: text/plain, Size: 44214 bytes --]
#
# Automatically generated make config: don't edit
#
CONFIG_X86=y
CONFIG_MMU=y
CONFIG_SWAP=y
CONFIG_UID16=y
CONFIG_GENERIC_ISA_DMA=y
#
# Code maturity level options
#
CONFIG_EXPERIMENTAL=y
#
# General setup
#
CONFIG_NET=y
CONFIG_SYSVIPC=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_SYSCTL=y
#
# Loadable module support
#
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_KMOD=y
#
# Processor type and features
#
# CONFIG_M386 is not set
# CONFIG_M486 is not set
CONFIG_M586=y
# CONFIG_M586TSC is not set
# CONFIG_M586MMX is not set
# CONFIG_M686 is not set
# CONFIG_MPENTIUMIII is not set
# CONFIG_MPENTIUM4 is not set
# CONFIG_MK6 is not set
# CONFIG_MK7 is not set
# CONFIG_MELAN is not set
# CONFIG_MCRUSOE is not set
# CONFIG_MWINCHIPC6 is not set
# CONFIG_MWINCHIP2 is not set
# CONFIG_MWINCHIP3D is not set
# CONFIG_MCYRIXIII is not set
CONFIG_X86_CMPXCHG=y
CONFIG_X86_XADD=y
CONFIG_X86_L1_CACHE_SHIFT=5
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_X86_PPRO_FENCE=y
CONFIG_X86_F00F_BUG=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_INVLPG=y
CONFIG_X86_BSWAP=y
CONFIG_X86_POPAD_OK=y
CONFIG_X86_USE_STRING_486=y
CONFIG_X86_ALIGNMENT_16=y
CONFIG_HUGETLB_PAGE=y
# CONFIG_SMP is not set
CONFIG_PREEMPT=y
CONFIG_X86_UP_APIC=y
CONFIG_X86_UP_IOAPIC=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_NONFATAL=y
CONFIG_X86_MCE_P4THERMAL=y
CONFIG_CPU_FREQ=y
# CONFIG_CPU_FREQ_24_API is not set
CONFIG_X86_POWERNOW_K6=m
CONFIG_X86_LONGHAUL=m
CONFIG_X86_SPEEDSTEP=m
CONFIG_X86_P4_CLOCKMOD=m
CONFIG_X86_LONGRUN=m
CONFIG_TOSHIBA=m
CONFIG_I8K=m
CONFIG_MICROCODE=m
CONFIG_X86_MSR=m
CONFIG_X86_CPUID=m
CONFIG_EDD=m
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
CONFIG_HIGHMEM=y
# CONFIG_HIGHPTE is not set
# CONFIG_MATH_EMULATION is not set
CONFIG_MTRR=y
CONFIG_HAVE_DEC_LOCK=y
#
# Power management options (ACPI, APM)
#
CONFIG_PM=y
CONFIG_SOFTWARE_SUSPEND=y
#
# ACPI Support
#
CONFIG_ACPI=y
# CONFIG_ACPI_HT_ONLY is not set
CONFIG_ACPI_BOOT=y
CONFIG_ACPI_SLEEP=y
CONFIG_ACPI_AC=m
CONFIG_ACPI_BATTERY=m
CONFIG_ACPI_BUTTON=m
CONFIG_ACPI_FAN=m
CONFIG_ACPI_PROCESSOR=m
CONFIG_ACPI_PROCESSOR_PERF=y
CONFIG_ACPI_THERMAL=m
CONFIG_ACPI_TOSHIBA=m
# CONFIG_ACPI_DEBUG is not set
CONFIG_ACPI_BUS=y
CONFIG_ACPI_INTERPRETER=y
CONFIG_ACPI_EC=y
CONFIG_ACPI_POWER=y
CONFIG_ACPI_PCI=y
CONFIG_ACPI_SYSTEM=y
CONFIG_APM=y
# CONFIG_APM_IGNORE_USER_SUSPEND is not set
CONFIG_APM_DO_ENABLE=y
# CONFIG_APM_CPU_IDLE is not set
CONFIG_APM_DISPLAY_BLANK=y
# CONFIG_APM_RTC_IS_GMT is not set
CONFIG_APM_ALLOW_INTS=y
# CONFIG_APM_REAL_MODE_POWER_OFF is not set
#
# Bus options (PCI, PCMCIA, EISA, MCA, ISA)
#
CONFIG_PCI=y
# CONFIG_PCI_GOBIOS is not set
# CONFIG_PCI_GODIRECT is not set
CONFIG_PCI_GOANY=y
CONFIG_PCI_BIOS=y
CONFIG_PCI_DIRECT=y
CONFIG_SCx200=m
# CONFIG_PCI_NAMES is not set
CONFIG_ISA=y
CONFIG_EISA=y
# CONFIG_MCA is not set
CONFIG_HOTPLUG=y
#
# PCMCIA/CardBus support
#
CONFIG_PCMCIA=m
CONFIG_CARDBUS=y
CONFIG_I82092=m
CONFIG_I82365=m
CONFIG_TCIC=m
#
# PCI Hotplug Support
#
CONFIG_HOTPLUG_PCI=m
CONFIG_HOTPLUG_PCI_COMPAQ=m
CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM=y
CONFIG_HOTPLUG_PCI_IBM=m
CONFIG_HOTPLUG_PCI_ACPI=m
CONFIG_HOTPLUG_PCI_CPCI=m
CONFIG_HOTPLUG_PCI_CPCI_ZT5550=m
CONFIG_HOTPLUG_PCI_CPCI_GENERIC=m
#
# Executable file formats
#
CONFIG_KCORE_ELF=y
# CONFIG_KCORE_AOUT is not set
CONFIG_BINFMT_AOUT=m
CONFIG_BINFMT_ELF=y
CONFIG_BINFMT_MISC=m
#
# Memory Technology Devices (MTD)
#
CONFIG_MTD=m
# CONFIG_MTD_DEBUG is not set
CONFIG_MTD_PARTITIONS=m
CONFIG_MTD_CONCAT=m
CONFIG_MTD_REDBOOT_PARTS=m
CONFIG_MTD_CMDLINE_PARTS=m
#
# User Modules And Translation Layers
#
CONFIG_MTD_CHAR=m
CONFIG_MTD_BLOCK=m
CONFIG_MTD_BLOCK_RO=m
CONFIG_FTL=m
CONFIG_NFTL=m
# CONFIG_NFTL_RW is not set
#
# RAM/ROM/Flash chip drivers
#
CONFIG_MTD_CFI=m
CONFIG_MTD_JEDECPROBE=m
CONFIG_MTD_GEN_PROBE=m
CONFIG_MTD_CFI_ADV_OPTIONS=y
CONFIG_MTD_CFI_NOSWAP=y
# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
# CONFIG_MTD_CFI_GEOMETRY is not set
CONFIG_MTD_CFI_INTELEXT=m
CONFIG_MTD_CFI_AMDSTD=m
# CONFIG_MTD_RAM is not set
# CONFIG_MTD_ROM is not set
CONFIG_MTD_ABSENT=m
CONFIG_MTD_OBSOLETE_CHIPS=y
CONFIG_MTD_AMDSTD=m
CONFIG_MTD_SHARP=m
CONFIG_MTD_JEDEC=m
#
# Mapping drivers for chip access
#
CONFIG_MTD_PHYSMAP=m
CONFIG_MTD_PHYSMAP_START=0x8000000
CONFIG_MTD_PHYSMAP_LEN=0x4000000
CONFIG_MTD_PHYSMAP_BUSWIDTH=2
CONFIG_MTD_PNC2000=m
CONFIG_MTD_SC520CDP=m
CONFIG_MTD_NETSC520=m
CONFIG_MTD_SBC_GXX=m
CONFIG_MTD_ELAN_104NC=m
CONFIG_MTD_MIXMEM=m
CONFIG_MTD_OCTAGON=m
CONFIG_MTD_VMAX=m
CONFIG_MTD_SCx200_DOCFLASH=m
CONFIG_MTD_L440GX=m
CONFIG_MTD_PCI=m
CONFIG_MTD_PCMCIA=m
CONFIG_MTD_UCLINUX=m
#
# Self-contained MTD device drivers
#
CONFIG_MTD_PMC551=m
CONFIG_MTD_PMC551_BUGFIX=y
# CONFIG_MTD_PMC551_DEBUG is not set
CONFIG_MTD_SLRAM=m
CONFIG_MTD_MTDRAM=m
CONFIG_MTDRAM_TOTAL_SIZE=4096
CONFIG_MTDRAM_ERASE_SIZE=128
CONFIG_MTD_BLKMTD=m
#
# Disk-On-Chip Device Drivers
#
CONFIG_MTD_DOC1000=m
CONFIG_MTD_DOC2000=m
CONFIG_MTD_DOC2001=m
CONFIG_MTD_DOCPROBE=m
CONFIG_MTD_DOCPROBE_ADVANCED=y
CONFIG_MTD_DOCPROBE_ADDRESS=0x0000
CONFIG_MTD_DOCPROBE_HIGH=y
CONFIG_MTD_DOCPROBE_55AA=y
#
# NAND Flash Device Drivers
#
CONFIG_MTD_NAND=m
CONFIG_MTD_NAND_ECC=y
# CONFIG_MTD_NAND_VERIFY_WRITE is not set
#
# Parallel port support
#
CONFIG_PARPORT=m
CONFIG_PARPORT_PC=m
CONFIG_PARPORT_PC_CML1=m
CONFIG_PARPORT_SERIAL=m
CONFIG_PARPORT_PC_FIFO=y
CONFIG_PARPORT_PC_SUPERIO=y
CONFIG_PARPORT_PC_PCMCIA=m
CONFIG_PARPORT_OTHER=y
CONFIG_PARPORT_1284=y
#
# Plug and Play support
#
CONFIG_PNP=y
CONFIG_PNP_NAMES=y
CONFIG_PNP_CARD=y
# CONFIG_PNP_DEBUG is not set
#
# Protocols
#
CONFIG_ISAPNP=y
CONFIG_PNPBIOS=y
#
# Block devices
#
CONFIG_BLK_DEV_FD=y
CONFIG_BLK_DEV_XD=m
CONFIG_PARIDE=m
CONFIG_PARIDE_PARPORT=m
#
# Parallel IDE high-level drivers
#
CONFIG_PARIDE_PD=m
CONFIG_PARIDE_PCD=m
CONFIG_PARIDE_PF=m
CONFIG_PARIDE_PT=m
CONFIG_PARIDE_PG=m
#
# Parallel IDE protocol modules
#
CONFIG_PARIDE_ATEN=m
CONFIG_PARIDE_BPCK=m
CONFIG_PARIDE_BPCK6=m
CONFIG_PARIDE_COMM=m
CONFIG_PARIDE_DSTR=m
CONFIG_PARIDE_FIT2=m
CONFIG_PARIDE_FIT3=m
CONFIG_PARIDE_EPAT=m
CONFIG_PARIDE_EPATC8=y
CONFIG_PARIDE_EPIA=m
CONFIG_PARIDE_FRIQ=m
CONFIG_PARIDE_FRPW=m
CONFIG_PARIDE_KBIC=m
CONFIG_PARIDE_KTTI=m
CONFIG_PARIDE_ON20=m
CONFIG_PARIDE_ON26=m
CONFIG_BLK_CPQ_DA=m
CONFIG_BLK_CPQ_CISS_DA=m
CONFIG_CISS_SCSI_TAPE=y
CONFIG_BLK_DEV_DAC960=m
CONFIG_BLK_DEV_UMEM=m
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_NBD=m
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_SIZE=64000
CONFIG_BLK_DEV_INITRD=y
# CONFIG_LBD is not set
#
# ATA/ATAPI/MFM/RLL device support
#
CONFIG_IDE=y
#
# IDE, ATA and ATAPI Block devices
#
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_HD_IDE is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_IDEDISK_STROKE=y
CONFIG_BLK_DEV_IDECS=m
CONFIG_BLK_DEV_IDECD=m
CONFIG_BLK_DEV_IDEFLOPPY=y
CONFIG_BLK_DEV_IDESCSI=m
# CONFIG_IDE_TASK_IOCTL is not set
#
# IDE chipset support/bugfixes
#
CONFIG_BLK_DEV_CMD640=y
CONFIG_BLK_DEV_CMD640_ENHANCED=y
# CONFIG_BLK_DEV_ISAPNP is not set
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_BLK_DEV_GENERIC=y
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_BLK_DEV_IDE_TCQ=y
CONFIG_BLK_DEV_IDE_TCQ_DEFAULT=y
CONFIG_BLK_DEV_IDE_TCQ_DEPTH=8
CONFIG_BLK_DEV_OFFBOARD=y
# CONFIG_BLK_DEV_IDEDMA_FORCED is not set
CONFIG_IDEDMA_PCI_AUTO=y
CONFIG_IDEDMA_ONLYDISK=y
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_PCI_WIP is not set
CONFIG_BLK_DEV_ADMA=y
CONFIG_BLK_DEV_AEC62XX=y
CONFIG_BLK_DEV_ALI15X3=y
# CONFIG_WDC_ALI15X3 is not set
CONFIG_BLK_DEV_AMD74XX=y
# CONFIG_AMD74XX_OVERRIDE is not set
CONFIG_BLK_DEV_CMD64X=y
CONFIG_BLK_DEV_CY82C693=y
CONFIG_BLK_DEV_CS5520=m
CONFIG_BLK_DEV_HPT34X=y
CONFIG_BLK_DEV_HPT366=y
CONFIG_BLK_DEV_SC1200=m
CONFIG_BLK_DEV_PIIX=y
CONFIG_BLK_DEV_NFORCE=m
CONFIG_BLK_DEV_NS87415=y
# CONFIG_BLK_DEV_OPTI621 is not set
CONFIG_BLK_DEV_PDC202XX_OLD=m
CONFIG_BLK_DEV_PDC202XX_NEW=m
CONFIG_BLK_DEV_RZ1000=y
CONFIG_BLK_DEV_SVWKS=y
CONFIG_BLK_DEV_SIIMAGE=m
CONFIG_BLK_DEV_SIS5513=y
CONFIG_BLK_DEV_SLC90E66=y
# CONFIG_BLK_DEV_TRM290 is not set
CONFIG_BLK_DEV_VIA82CXXX=y
CONFIG_IDE_CHIPSETS=y
#
# Note: most of these also require special kernel boot parameters
#
CONFIG_BLK_DEV_4DRIVES=y
CONFIG_BLK_DEV_ALI14XX=y
CONFIG_BLK_DEV_DTC2278=y
CONFIG_BLK_DEV_HT6560B=y
# CONFIG_BLK_DEV_PDC4030 is not set
CONFIG_BLK_DEV_QD65XX=y
CONFIG_BLK_DEV_UMC8672=y
CONFIG_IDEDMA_AUTO=y
# CONFIG_IDEDMA_IVB is not set
CONFIG_BLK_DEV_PDC202XX=y
CONFIG_BLK_DEV_IDE_MODES=y
#
# SCSI device support
#
CONFIG_SCSI=y
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_ST=m
CONFIG_CHR_DEV_OSST=m
CONFIG_BLK_DEV_SR=m
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=m
#
# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
#
CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_REPORT_LUNS=y
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
#
# SCSI low-level drivers
#
CONFIG_BLK_DEV_3W_XXXX_RAID=m
CONFIG_SCSI_7000FASST=m
CONFIG_SCSI_ACARD=m
CONFIG_SCSI_AHA152X=m
CONFIG_SCSI_AHA1542=m
CONFIG_SCSI_AHA1740=m
CONFIG_SCSI_AACRAID=m
CONFIG_SCSI_AIC7XXX=m
CONFIG_AIC7XXX_CMDS_PER_DEVICE=32
CONFIG_AIC7XXX_RESET_DELAY_MS=5000
# CONFIG_AIC7XXX_BUILD_FIRMWARE is not set
CONFIG_SCSI_AIC7XXX_OLD=m
CONFIG_SCSI_DPT_I2O=m
CONFIG_SCSI_ADVANSYS=m
CONFIG_SCSI_IN2000=m
CONFIG_SCSI_AM53C974=m
CONFIG_SCSI_MEGARAID=m
CONFIG_SCSI_BUSLOGIC=m
# CONFIG_SCSI_OMIT_FLASHPOINT is not set
CONFIG_SCSI_CPQFCTS=m
CONFIG_SCSI_DMX3191D=m
CONFIG_SCSI_DTC3280=m
CONFIG_SCSI_EATA=m
CONFIG_SCSI_EATA_TAGGED_QUEUE=y
CONFIG_SCSI_EATA_LINKED_COMMANDS=y
CONFIG_SCSI_EATA_MAX_TAGS=16
CONFIG_SCSI_EATA_DMA=m
CONFIG_SCSI_EATA_PIO=m
CONFIG_SCSI_FUTURE_DOMAIN=m
CONFIG_SCSI_GDTH=m
CONFIG_SCSI_GENERIC_NCR5380=m
CONFIG_SCSI_GENERIC_NCR5380_MMIO=m
CONFIG_SCSI_GENERIC_NCR53C400=y
CONFIG_SCSI_IPS=m
CONFIG_SCSI_INITIO=m
CONFIG_SCSI_INIA100=m
CONFIG_SCSI_PPA=m
CONFIG_SCSI_IMM=m
# CONFIG_SCSI_IZIP_EPP16 is not set
# CONFIG_SCSI_IZIP_SLOW_CTR is not set
CONFIG_SCSI_NCR53C406A=m
CONFIG_SCSI_NCR53C7xx=m
# CONFIG_SCSI_NCR53C7xx_sync is not set
CONFIG_SCSI_NCR53C7xx_FAST=y
CONFIG_SCSI_NCR53C7xx_DISCONNECT=y
CONFIG_SCSI_SYM53C8XX_2=m
CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16
CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64
# CONFIG_SCSI_SYM53C8XX_IOMAPPED is not set
CONFIG_SCSI_NCR53C8XX=m
CONFIG_SCSI_SYM53C8XX=m
CONFIG_SCSI_NCR53C8XX_DEFAULT_TAGS=8
CONFIG_SCSI_NCR53C8XX_MAX_TAGS=32
CONFIG_SCSI_NCR53C8XX_SYNC=80
CONFIG_SCSI_NCR53C8XX_PROFILE=y
# CONFIG_SCSI_NCR53C8XX_IOMAPPED is not set
CONFIG_SCSI_NCR53C8XX_PQS_PDS=y
# CONFIG_SCSI_NCR53C8XX_SYMBIOS_COMPAT is not set
CONFIG_SCSI_PAS16=m
CONFIG_SCSI_PCI2000=m
CONFIG_SCSI_PCI2220I=m
CONFIG_SCSI_PSI240I=m
CONFIG_SCSI_QLOGIC_FAS=m
CONFIG_SCSI_QLOGIC_ISP=m
CONFIG_SCSI_QLOGIC_FC=m
CONFIG_SCSI_QLOGIC_FC_FIRMWARE=y
CONFIG_SCSI_QLOGIC_1280=m
CONFIG_SCSI_SEAGATE=m
CONFIG_SCSI_SIM710=m
CONFIG_SCSI_SYM53C416=m
CONFIG_SCSI_DC390T=m
# CONFIG_SCSI_DC390T_NOGENSUPP is not set
CONFIG_SCSI_T128=m
CONFIG_SCSI_U14_34F=m
CONFIG_SCSI_U14_34F_LINKED_COMMANDS=y
CONFIG_SCSI_U14_34F_MAX_TAGS=8
CONFIG_SCSI_ULTRASTOR=m
CONFIG_SCSI_NSP32=m
CONFIG_SCSI_DEBUG=m
#
# PCMCIA SCSI adapter support
#
CONFIG_SCSI_PCMCIA=y
CONFIG_PCMCIA_AHA152X=m
CONFIG_PCMCIA_FDOMAIN=m
CONFIG_PCMCIA_NINJA_SCSI=m
CONFIG_PCMCIA_QLOGIC=m
#
# Old CD-ROM drivers (not SCSI, not IDE)
#
CONFIG_CD_NO_IDESCSI=y
CONFIG_AZTCD=m
CONFIG_GSCD=m
CONFIG_SBPCD=m
CONFIG_MCD=m
CONFIG_MCD_IRQ=11
CONFIG_MCD_BASE=0x300
CONFIG_MCDX=m
CONFIG_OPTCD=m
CONFIG_CM206=m
CONFIG_SJCD=m
CONFIG_ISP16_CDI=m
CONFIG_CDU31A=m
CONFIG_CDU535=m
#
# Multi-device support (RAID and LVM)
#
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
CONFIG_MD_LINEAR=m
CONFIG_MD_RAID0=m
CONFIG_MD_RAID1=m
CONFIG_MD_RAID5=m
CONFIG_MD_MULTIPATH=m
CONFIG_BLK_DEV_DM=m
#
# Fusion MPT device support
#
CONFIG_FUSION=m
CONFIG_FUSION_MAX_SGE=40
CONFIG_FUSION_ISENSE=m
CONFIG_FUSION_CTL=m
CONFIG_FUSION_LAN=m
#
# IEEE 1394 (FireWire) support (EXPERIMENTAL)
#
CONFIG_IEEE1394=m
#
# Device Drivers
#
CONFIG_IEEE1394_PCILYNX=m
CONFIG_IEEE1394_OHCI1394=m
#
# Protocol Drivers
#
CONFIG_IEEE1394_VIDEO1394=m
CONFIG_IEEE1394_SBP2=m
# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
CONFIG_IEEE1394_ETH1394=m
CONFIG_IEEE1394_DV1394=m
CONFIG_IEEE1394_RAWIO=m
CONFIG_IEEE1394_CMP=m
CONFIG_IEEE1394_AMDTP=m
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
#
# I2O device support
#
CONFIG_I2O=m
CONFIG_I2O_PCI=m
CONFIG_I2O_BLOCK=m
CONFIG_I2O_LAN=m
CONFIG_I2O_SCSI=m
CONFIG_I2O_PROC=m
#
# Networking options
#
CONFIG_PACKET=m
CONFIG_PACKET_MMAP=y
CONFIG_NETLINK_DEV=m
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_FILTER=y
CONFIG_UNIX=y
CONFIG_NET_KEY=m
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_FWMARK=y
CONFIG_IP_ROUTE_NAT=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_TOS=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_ROUTE_LARGE_TABLES=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
CONFIG_NET_IPIP=m
CONFIG_NET_IPGRE=m
CONFIG_NET_IPGRE_BROADCAST=y
CONFIG_IP_MROUTE=y
CONFIG_IP_PIMSM_V1=y
CONFIG_IP_PIMSM_V2=y
# CONFIG_ARPD is not set
CONFIG_INET_ECN=y
CONFIG_SYN_COOKIES=y
CONFIG_INET_AH=m
CONFIG_INET_ESP=m
CONFIG_XFRM_USER=m
#
# IP: Netfilter Configuration
#
CONFIG_IP_NF_CONNTRACK=m
CONFIG_IP_NF_FTP=m
CONFIG_IP_NF_IRC=m
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_LIMIT=m
CONFIG_IP_NF_MATCH_MAC=m
CONFIG_IP_NF_MATCH_PKTTYPE=m
CONFIG_IP_NF_MATCH_MARK=m
CONFIG_IP_NF_MATCH_MULTIPORT=m
CONFIG_IP_NF_MATCH_TOS=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_DSCP=m
CONFIG_IP_NF_MATCH_AH_ESP=m
CONFIG_IP_NF_MATCH_LENGTH=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_MATCH_TCPMSS=m
CONFIG_IP_NF_MATCH_HELPER=m
CONFIG_IP_NF_MATCH_STATE=m
CONFIG_IP_NF_MATCH_CONNTRACK=m
CONFIG_IP_NF_MATCH_UNCLEAN=m
CONFIG_IP_NF_MATCH_OWNER=m
CONFIG_IP_NF_MATCH_PHYSDEV=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_MIRROR=m
CONFIG_IP_NF_NAT=m
CONFIG_IP_NF_NAT_NEEDED=y
CONFIG_IP_NF_TARGET_MASQUERADE=m
CONFIG_IP_NF_TARGET_REDIRECT=m
# CONFIG_IP_NF_NAT_LOCAL is not set
CONFIG_IP_NF_NAT_SNMP_BASIC=m
CONFIG_IP_NF_NAT_IRC=m
CONFIG_IP_NF_NAT_FTP=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_TOS=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_DSCP=m
CONFIG_IP_NF_TARGET_MARK=m
CONFIG_IP_NF_TARGET_LOG=m
CONFIG_IP_NF_TARGET_ULOG=m
CONFIG_IP_NF_TARGET_TCPMSS=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_COMPAT_IPCHAINS=m
CONFIG_IP_NF_COMPAT_IPFWADM=m
CONFIG_IPV6=m
#
# IPv6: Netfilter Configuration
#
CONFIG_IP6_NF_QUEUE=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_LIMIT=m
CONFIG_IP6_NF_MATCH_MAC=m
CONFIG_IP6_NF_MATCH_MULTIPORT=m
CONFIG_IP6_NF_MATCH_OWNER=m
CONFIG_IP6_NF_MATCH_MARK=m
CONFIG_IP6_NF_MATCH_LENGTH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_FILTER=m
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_TARGET_MARK=m
#
# SCTP Configuration (EXPERIMENTAL)
#
CONFIG_IPV6_SCTP__=y
CONFIG_IP_SCTP=m
# CONFIG_SCTP_ADLER32 is not set
# CONFIG_SCTP_DBG_MSG is not set
# CONFIG_SCTP_DBG_OBJCNT is not set
CONFIG_ATM=y
CONFIG_ATM_CLIP=y
CONFIG_ATM_CLIP_NO_ICMP=y
CONFIG_ATM_LANE=m
CONFIG_ATM_MPOA=m
CONFIG_VLAN_8021Q=m
# CONFIG_LLC is not set
CONFIG_DECNET=m
CONFIG_DECNET_SIOCGIFCONF=y
# CONFIG_DECNET_ROUTER is not set
CONFIG_BRIDGE=m
CONFIG_BRIDGE_NF_EBTABLES=m
CONFIG_BRIDGE_EBT_T_FILTER=m
CONFIG_BRIDGE_EBT_T_NAT=m
CONFIG_BRIDGE_EBT_BROUTE=m
CONFIG_BRIDGE_EBT_LOG=m
CONFIG_BRIDGE_EBT_IPF=m
CONFIG_BRIDGE_EBT_ARPF=m
CONFIG_BRIDGE_EBT_VLANF=m
CONFIG_BRIDGE_EBT_MARKF=m
CONFIG_BRIDGE_EBT_SNAT=m
CONFIG_BRIDGE_EBT_DNAT=m
CONFIG_BRIDGE_EBT_REDIRECT=m
CONFIG_BRIDGE_EBT_MARK_T=m
CONFIG_X25=m
CONFIG_LAPB=m
# CONFIG_NET_DIVERT is not set
CONFIG_ECONET=m
# CONFIG_ECONET_AUNUDP is not set
# CONFIG_ECONET_NATIVE is not set
CONFIG_WAN_ROUTER=m
# CONFIG_NET_FASTROUTE is not set
# CONFIG_NET_HW_FLOWCONTROL is not set
#
# QoS and/or fair queueing
#
CONFIG_NET_SCHED=y
CONFIG_NET_SCH_CBQ=m
CONFIG_NET_SCH_HTB=m
CONFIG_NET_SCH_CSZ=m
CONFIG_NET_SCH_ATM=y
CONFIG_NET_SCH_PRIO=m
CONFIG_NET_SCH_RED=m
CONFIG_NET_SCH_SFQ=m
CONFIG_NET_SCH_TEQL=m
CONFIG_NET_SCH_TBF=m
CONFIG_NET_SCH_GRED=m
CONFIG_NET_SCH_DSMARK=m
CONFIG_NET_SCH_INGRESS=m
CONFIG_NET_QOS=y
CONFIG_NET_ESTIMATOR=y
CONFIG_NET_CLS=y
CONFIG_NET_CLS_TCINDEX=m
CONFIG_NET_CLS_ROUTE4=m
CONFIG_NET_CLS_ROUTE=y
CONFIG_NET_CLS_FW=m
CONFIG_NET_CLS_U32=m
CONFIG_NET_CLS_RSVP=m
CONFIG_NET_CLS_RSVP6=m
CONFIG_NET_CLS_POLICE=y
#
# Network testing
#
CONFIG_NET_PKTGEN=m
#
# Network device support
#
CONFIG_NETDEVICES=y
#
# ARCnet devices
#
CONFIG_ARCNET=m
CONFIG_ARCNET_1201=m
CONFIG_ARCNET_1051=m
CONFIG_ARCNET_RAW=m
CONFIG_ARCNET_COM90xx=m
CONFIG_ARCNET_COM90xxIO=m
CONFIG_ARCNET_RIM_I=m
CONFIG_ARCNET_COM20020=m
CONFIG_ARCNET_COM20020_ISA=m
CONFIG_ARCNET_COM20020_PCI=m
CONFIG_DUMMY=m
CONFIG_BONDING=m
CONFIG_EQUALIZER=m
CONFIG_TUN=m
CONFIG_ETHERTAP=m
CONFIG_NET_SB1000=m
#
# Ethernet (10 or 100Mbit)
#
CONFIG_NET_ETHERNET=y
CONFIG_HAPPYMEAL=m
CONFIG_SUNGEM=m
CONFIG_NET_VENDOR_3COM=y
CONFIG_EL1=m
CONFIG_EL2=m
CONFIG_ELPLUS=m
CONFIG_EL16=m
CONFIG_EL3=m
CONFIG_3C515=m
CONFIG_VORTEX=m
CONFIG_LANCE=m
CONFIG_NET_VENDOR_SMC=y
CONFIG_WD80x3=m
CONFIG_ULTRA=m
CONFIG_ULTRA32=m
CONFIG_SMC9194=m
CONFIG_NET_VENDOR_RACAL=y
CONFIG_NI5010=m
CONFIG_NI52=m
CONFIG_NI65=m
#
# Tulip family network device support
#
CONFIG_NET_TULIP=y
CONFIG_DE2104X=m
CONFIG_TULIP=m
# CONFIG_TULIP_MWI is not set
# CONFIG_TULIP_MMIO is not set
CONFIG_DE4X5=m
CONFIG_WINBOND_840=m
CONFIG_DM9102=m
CONFIG_PCMCIA_XIRCOM=m
CONFIG_PCMCIA_XIRTULIP=m
CONFIG_AT1700=m
CONFIG_DEPCA=m
CONFIG_HP100=m
CONFIG_NET_ISA=y
CONFIG_E2100=m
CONFIG_EWRK3=m
CONFIG_EEXPRESS=m
CONFIG_EEXPRESS_PRO=m
CONFIG_HPLAN_PLUS=m
CONFIG_HPLAN=m
CONFIG_LP486E=m
CONFIG_ETH16I=m
CONFIG_NE2000=m
CONFIG_ZNET=m
CONFIG_NET_PCI=y
CONFIG_PCNET32=m
CONFIG_ADAPTEC_STARFIRE=m
CONFIG_AC3200=m
CONFIG_APRICOT=m
CONFIG_B44=m
CONFIG_CS89x0=m
CONFIG_DGRS=m
CONFIG_EEPRO100=m
CONFIG_E100=m
CONFIG_LNE390=m
CONFIG_FEALNX=m
CONFIG_NATSEMI=m
CONFIG_NE2K_PCI=m
CONFIG_NE3210=m
CONFIG_ES3210=m
CONFIG_8139CP=m
CONFIG_8139TOO=m
# CONFIG_8139TOO_PIO is not set
# CONFIG_8139TOO_TUNE_TWISTER is not set
CONFIG_8139TOO_8129=y
# CONFIG_8139_OLD_RX_RESET is not set
CONFIG_SIS900=m
CONFIG_EPIC100=m
CONFIG_SUNDANCE=m
# CONFIG_SUNDANCE_MMIO is not set
CONFIG_TLAN=m
CONFIG_VIA_RHINE=m
# CONFIG_VIA_RHINE_MMIO is not set
CONFIG_NET_POCKET=y
CONFIG_ATP=m
CONFIG_DE600=m
CONFIG_DE620=m
#
# Ethernet (1000 Mbit)
#
CONFIG_ACENIC=m
# CONFIG_ACENIC_OMIT_TIGON_I is not set
CONFIG_DL2K=m
CONFIG_E1000=m
# CONFIG_E1000_NAPI is not set
CONFIG_NS83820=m
CONFIG_HAMACHI=m
CONFIG_YELLOWFIN=m
CONFIG_R8169=m
CONFIG_SK98LIN=m
CONFIG_TIGON3=m
CONFIG_FDDI=y
CONFIG_DEFXX=m
CONFIG_SKFP=m
CONFIG_HIPPI=y
CONFIG_ROADRUNNER=m
CONFIG_ROADRUNNER_LARGE_RINGS=y
CONFIG_PLIP=m
CONFIG_PPP=m
# CONFIG_PPP_MULTILINK is not set
CONFIG_PPP_FILTER=y
CONFIG_PPP_ASYNC=m
CONFIG_PPP_SYNC_TTY=m
CONFIG_PPP_DEFLATE=m
CONFIG_PPP_BSDCOMP=m
CONFIG_PPPOE=m
CONFIG_PPPOATM=m
CONFIG_SLIP=m
CONFIG_SLIP_COMPRESSED=y
CONFIG_SLIP_SMART=y
CONFIG_SLIP_MODE_SLIP6=y
#
# Wireless LAN (non-hamradio)
#
CONFIG_NET_RADIO=y
CONFIG_STRIP=m
CONFIG_ARLAN=m
CONFIG_AIRONET4500=m
CONFIG_AIRONET4500_NONCS=m
CONFIG_AIRONET4500_PNP=y
CONFIG_AIRONET4500_PCI=y
CONFIG_AIRONET4500_ISA=y
CONFIG_AIRONET4500_I365=y
CONFIG_AIRONET4500_PROC=m
#
# Wireless ISA/PCI cards support
#
CONFIG_WAVELAN=m
CONFIG_AIRO=m
CONFIG_HERMES=m
CONFIG_PLX_HERMES=m
CONFIG_PCI_HERMES=m
#
# Wireless Pcmcia/Cardbus cards support
#
CONFIG_PCMCIA_NETWAVE=m
CONFIG_PCMCIA_WAVELAN=m
CONFIG_PCMCIA_HERMES=m
CONFIG_AIRO_CS=m
CONFIG_NET_WIRELESS=y
#
# Token Ring devices (depends on LLC=y)
#
CONFIG_NET_FC=y
CONFIG_IPHASE5526=m
CONFIG_RCPCI=m
CONFIG_SHAPER=m
#
# Wan interfaces
#
CONFIG_WAN=y
CONFIG_HOSTESS_SV11=m
CONFIG_COSA=m
CONFIG_COMX=m
CONFIG_COMX_HW_COMX=m
CONFIG_COMX_HW_LOCOMX=m
CONFIG_COMX_HW_MIXCOM=m
CONFIG_COMX_HW_MUNICH=m
CONFIG_COMX_PROTO_PPP=m
CONFIG_COMX_PROTO_LAPB=m
CONFIG_COMX_PROTO_FR=m
CONFIG_DSCC4=m
CONFIG_LANMEDIA=m
CONFIG_SEALEVEL_4021=m
CONFIG_SYNCLINK_SYNCPPP=m
CONFIG_HDLC=m
CONFIG_HDLC_RAW=y
CONFIG_HDLC_CISCO=y
CONFIG_HDLC_FR=y
CONFIG_HDLC_PPP=y
CONFIG_HDLC_X25=y
CONFIG_PC300=m
#
# Cyclades-PC300 MLPPP support is disabled.
#
#
# Refer to the file README.mlppp, provided by PC300 package.
#
CONFIG_N2=m
CONFIG_C101=m
CONFIG_FARSYNC=m
# CONFIG_HDLC_DEBUG_PKT is not set
# CONFIG_HDLC_DEBUG_HARD_HEADER is not set
# CONFIG_HDLC_DEBUG_ECN is not set
# CONFIG_HDLC_DEBUG_RINGS is not set
CONFIG_DLCI=m
CONFIG_DLCI_COUNT=24
CONFIG_DLCI_MAX=8
CONFIG_SDLA=m
CONFIG_WAN_ROUTER_DRIVERS=y
CONFIG_VENDOR_SANGOMA=m
CONFIG_WANPIPE_CHDLC=y
# CONFIG_WANPIPE_FR is not set
CONFIG_WANPIPE_X25=y
CONFIG_WANPIPE_PPP=y
CONFIG_WANPIPE_MULTPPP=y
CONFIG_CYCLADES_SYNC=m
CONFIG_CYCLOMX_X25=y
CONFIG_LAPBETHER=m
CONFIG_X25_ASY=m
CONFIG_SBNI=m
CONFIG_SBNI_MULTILINE=y
#
# PCMCIA network device support
#
CONFIG_NET_PCMCIA=y
CONFIG_PCMCIA_3C589=m
CONFIG_PCMCIA_3C574=m
CONFIG_PCMCIA_FMVJ18X=m
CONFIG_PCMCIA_PCNET=m
CONFIG_PCMCIA_NMCLAN=m
CONFIG_PCMCIA_SMC91C92=m
CONFIG_PCMCIA_XIRC2PS=m
CONFIG_PCMCIA_AXNET=m
CONFIG_ARCNET_COM20020_CS=m
CONFIG_NET_PCMCIA_RADIO=y
CONFIG_PCMCIA_RAYCS=m
CONFIG_AIRONET4500_CS=m
#
# ATM drivers
#
CONFIG_ATM_TCP=m
CONFIG_ATM_LANAI=m
CONFIG_ATM_ENI=m
# CONFIG_ATM_ENI_DEBUG is not set
# CONFIG_ATM_ENI_TUNE_BURST is not set
CONFIG_ATM_FIRESTREAM=m
CONFIG_ATM_ZATM=m
# CONFIG_ATM_ZATM_DEBUG is not set
CONFIG_ATM_ZATM_EXACT_TS=y
CONFIG_ATM_NICSTAR=m
CONFIG_ATM_NICSTAR_USE_SUNI=y
CONFIG_ATM_NICSTAR_USE_IDT77105=y
CONFIG_ATM_IDT77252=m
# CONFIG_ATM_IDT77252_DEBUG is not set
CONFIG_ATM_IDT77252_RCV_ALL=y
CONFIG_ATM_IDT77252_USE_SUNI=y
CONFIG_ATM_AMBASSADOR=m
# CONFIG_ATM_AMBASSADOR_DEBUG is not set
CONFIG_ATM_HORIZON=m
# CONFIG_ATM_HORIZON_DEBUG is not set
CONFIG_ATM_IA=m
# CONFIG_ATM_IA_DEBUG is not set
CONFIG_ATM_FORE200E_MAYBE=m
CONFIG_ATM_FORE200E_PCA=y
CONFIG_ATM_FORE200E_PCA_DEFAULT_FW=y
CONFIG_ATM_FORE200E_TX_RETRY=16
CONFIG_ATM_FORE200E_DEBUG=0
CONFIG_ATM_FORE200E=m
#
# Amateur Radio support
#
CONFIG_HAMRADIO=y
#
# Packet Radio protocols
#
CONFIG_AX25=m
CONFIG_AX25_DAMA_SLAVE=y
CONFIG_NETROM=m
CONFIG_ROSE=m
#
# AX.25 network device drivers
#
CONFIG_MKISS=m
CONFIG_6PACK=m
CONFIG_BPQETHER=m
CONFIG_DMASCC=m
CONFIG_SCC=m
CONFIG_SCC_DELAY=y
CONFIG_SCC_TRXECHO=y
CONFIG_BAYCOM_SER_FDX=m
CONFIG_BAYCOM_SER_HDX=m
CONFIG_BAYCOM_PAR=m
CONFIG_BAYCOM_EPP=m
CONFIG_YAM=m
#
# IrDA (infrared) support
#
CONFIG_IRDA=m
#
# IrDA protocols
#
CONFIG_IRLAN=m
CONFIG_IRNET=m
CONFIG_IRCOMM=m
CONFIG_IRDA_ULTRA=y
#
# IrDA options
#
CONFIG_IRDA_CACHE_LAST_LSAP=y
# CONFIG_IRDA_FAST_RR is not set
# CONFIG_IRDA_DEBUG is not set
#
# Infrared-port device drivers
#
#
# SIR device drivers
#
CONFIG_IRTTY_SIR=m
#
# Dongle support
#
CONFIG_DONGLE=y
CONFIG_ESI_DONGLE=m
CONFIG_ACTISYS_DONGLE=m
CONFIG_TEKRAM_DONGLE=m
#
# Old SIR device drivers
#
CONFIG_IRTTY_OLD=m
CONFIG_IRPORT_SIR=m
#
# Old Serial dongle support
#
CONFIG_DONGLE_OLD=y
CONFIG_ESI_DONGLE_OLD=m
CONFIG_ACTISYS_DONGLE_OLD=m
CONFIG_TEKRAM_DONGLE_OLD=m
CONFIG_GIRBIL_DONGLE=m
CONFIG_LITELINK_DONGLE=m
CONFIG_MCP2120_DONGLE=m
CONFIG_OLD_BELKIN_DONGLE=m
CONFIG_ACT200L_DONGLE=m
CONFIG_MA600_DONGLE=m
#
# FIR device drivers
#
CONFIG_USB_IRDA=m
CONFIG_NSC_FIR=m
CONFIG_WINBOND_FIR=m
CONFIG_TOSHIBA_OLD=m
CONFIG_TOSHIBA_FIR=m
CONFIG_SMC_IRCC_FIR=m
CONFIG_ALI_FIR=m
CONFIG_VLSI_FIR=m
#
# ISDN subsystem
#
CONFIG_ISDN_BOOL=y
#
# Old ISDN4Linux
#
CONFIG_ISDN=m
CONFIG_ISDN_NET_SIMPLE=y
CONFIG_ISDN_NET_CISCO=y
CONFIG_ISDN_PPP=y
CONFIG_ISDN_PPP_VJ=y
CONFIG_ISDN_MPP=y
CONFIG_ISDN_PPP_BSDCOMP=m
CONFIG_ISDN_AUDIO=y
CONFIG_ISDN_TTY_FAX=y
CONFIG_ISDN_X25=y
#
# ISDN feature submodules
#
CONFIG_ISDN_DRV_LOOP=m
CONFIG_ISDN_DIVERSION=m
#
# CAPI subsystem
#
CONFIG_ISDN_CAPI=m
CONFIG_ISDN_DRV_AVMB1_VERBOSE_REASON=y
CONFIG_ISDN_CAPI_MIDDLEWARE=y
CONFIG_ISDN_CAPI_CAPI20=m
CONFIG_ISDN_CAPI_CAPIFS_BOOL=y
CONFIG_ISDN_CAPI_CAPIFS=m
CONFIG_ISDN_CAPI_CAPIDRV=m
#
# CAPI hardware drivers
#
#
# Active AVM cards
#
CONFIG_CAPI_AVM=y
CONFIG_ISDN_DRV_AVMB1_B1ISA=m
CONFIG_ISDN_DRV_AVMB1_B1PCI=m
CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y
CONFIG_ISDN_DRV_AVMB1_T1ISA=m
CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m
CONFIG_ISDN_DRV_AVMB1_AVM_CS=m
CONFIG_ISDN_DRV_AVMB1_T1PCI=m
CONFIG_ISDN_DRV_AVMB1_C4=m
#
# Active Eicon DIVA Server cards
#
CONFIG_CAPI_EICON=y
CONFIG_ISDN_DIVAS=m
CONFIG_ISDN_DIVAS_BRIPCI=y
CONFIG_ISDN_DIVAS_4BRIPCI=y
CONFIG_ISDN_DIVAS_PRIPCI=y
CONFIG_ISDN_DIVAS_DIVACAPI=m
CONFIG_ISDN_DIVAS_MAINT=m
CONFIG_ISDN_DIVAS_USERIDI=m
#
# ISDN4Linux hardware drivers
#
#
# Passive cards
#
CONFIG_ISDN_DRV_HISAX=m
#
# D-channel protocol features
#
CONFIG_HISAX_EURO=y
CONFIG_DE_AOC=y
# CONFIG_HISAX_NO_SENDCOMPLETE is not set
# CONFIG_HISAX_NO_LLC is not set
# CONFIG_HISAX_NO_KEYPAD is not set
CONFIG_HISAX_1TR6=y
CONFIG_HISAX_NI1=y
CONFIG_HISAX_MAX_CARDS=8
#
# HiSax supported cards
#
CONFIG_HISAX_16_0=y
CONFIG_HISAX_16_3=y
CONFIG_HISAX_TELESPCI=y
CONFIG_HISAX_S0BOX=y
CONFIG_HISAX_AVM_A1=y
CONFIG_HISAX_FRITZPCI=y
CONFIG_HISAX_AVM_A1_PCMCIA=y
CONFIG_HISAX_ELSA=y
CONFIG_HISAX_IX1MICROR2=y
CONFIG_HISAX_DIEHLDIVA=y
CONFIG_HISAX_ASUSCOM=y
CONFIG_HISAX_TELEINT=y
CONFIG_HISAX_HFCS=y
CONFIG_HISAX_SEDLBAUER=y
CONFIG_HISAX_SPORTSTER=y
CONFIG_HISAX_MIC=y
CONFIG_HISAX_NETJET=y
CONFIG_HISAX_NETJET_U=y
CONFIG_HISAX_NICCY=y
CONFIG_HISAX_ISURF=y
CONFIG_HISAX_HSTSAPHIR=y
CONFIG_HISAX_BKM_A4T=y
CONFIG_HISAX_SCT_QUADRO=y
CONFIG_HISAX_GAZEL=y
CONFIG_HISAX_HFC_PCI=y
CONFIG_HISAX_W6692=y
CONFIG_HISAX_HFC_SX=y
CONFIG_HISAX_ENTERNOW_PCI=y
# CONFIG_HISAX_DEBUG is not set
CONFIG_HISAX_SEDLBAUER_CS=m
CONFIG_HISAX_ELSA_CS=m
CONFIG_HISAX_AVM_A1_CS=m
CONFIG_HISAX_ST5481=m
CONFIG_HISAX_FRITZ_PCIPNP=m
CONFIG_HISAX_FRITZ_CLASSIC=m
CONFIG_HISAX_HFCPCI=m
#
# Active cards
#
CONFIG_ISDN_DRV_ICN=m
CONFIG_ISDN_DRV_PCBIT=m
CONFIG_ISDN_DRV_SC=m
CONFIG_ISDN_DRV_ACT2000=m
CONFIG_ISDN_DRV_EICON=y
CONFIG_ISDN_DRV_EICON_DIVAS=m
CONFIG_ISDN_DRV_EICON_OLD=m
CONFIG_ISDN_DRV_EICON_PCI=y
CONFIG_ISDN_DRV_EICON_ISA=y
CONFIG_ISDN_DRV_TPAM=m
CONFIG_HYSDN=m
CONFIG_HYSDN_CAPI=y
#
# Telephony Support
#
CONFIG_PHONE=m
CONFIG_PHONE_IXJ=m
CONFIG_PHONE_IXJ_PCMCIA=m
#
# Input device support
#
CONFIG_INPUT=y
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=m
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
CONFIG_INPUT_JOYDEV=m
CONFIG_INPUT_TSDEV=m
CONFIG_INPUT_TSDEV_SCREEN_X=240
CONFIG_INPUT_TSDEV_SCREEN_Y=320
CONFIG_INPUT_EVDEV=m
CONFIG_INPUT_EVBUG=m
#
# Input I/O drivers
#
CONFIG_GAMEPORT=m
CONFIG_SOUND_GAMEPORT=m
CONFIG_GAMEPORT_NS558=m
CONFIG_GAMEPORT_L4=m
CONFIG_GAMEPORT_EMU10K1=m
CONFIG_GAMEPORT_VORTEX=m
CONFIG_GAMEPORT_FM801=m
CONFIG_GAMEPORT_CS461x=m
CONFIG_SERIO=m
CONFIG_SERIO_I8042=m
CONFIG_SERIO_SERPORT=m
CONFIG_SERIO_CT82C710=m
CONFIG_SERIO_PARKBD=m
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=m
CONFIG_KEYBOARD_SUNKBD=m
CONFIG_KEYBOARD_XTKBD=m
CONFIG_KEYBOARD_NEWTON=m
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=m
CONFIG_MOUSE_SERIAL=m
CONFIG_MOUSE_INPORT=m
CONFIG_MOUSE_ATIXL=y
CONFIG_MOUSE_LOGIBM=m
CONFIG_MOUSE_PC110PAD=m
CONFIG_INPUT_JOYSTICK=y
CONFIG_JOYSTICK_ANALOG=m
CONFIG_JOYSTICK_A3D=m
CONFIG_JOYSTICK_ADI=m
CONFIG_JOYSTICK_COBRA=m
CONFIG_JOYSTICK_GF2K=m
CONFIG_JOYSTICK_GRIP=m
CONFIG_JOYSTICK_GRIP_MP=m
CONFIG_JOYSTICK_GUILLEMOT=m
CONFIG_JOYSTICK_INTERACT=m
CONFIG_JOYSTICK_SIDEWINDER=m
CONFIG_JOYSTICK_TMDC=m
CONFIG_JOYSTICK_IFORCE=m
CONFIG_JOYSTICK_IFORCE_USB=y
CONFIG_JOYSTICK_IFORCE_232=y
CONFIG_JOYSTICK_WARRIOR=m
CONFIG_JOYSTICK_MAGELLAN=m
CONFIG_JOYSTICK_SPACEORB=m
CONFIG_JOYSTICK_SPACEBALL=m
CONFIG_JOYSTICK_STINGER=m
CONFIG_JOYSTICK_TWIDDLER=m
CONFIG_JOYSTICK_DB9=m
CONFIG_JOYSTICK_GAMECON=m
CONFIG_JOYSTICK_TURBOGRAFX=m
CONFIG_INPUT_JOYDUMP=m
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_GUNZE=m
CONFIG_INPUT_MISC=y
CONFIG_INPUT_PCSPKR=m
CONFIG_INPUT_UINPUT=m
#
# Character devices
#
CONFIG_VT=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
CONFIG_SERIAL_NONSTANDARD=y
CONFIG_COMPUTONE=m
CONFIG_ROCKETPORT=m
CONFIG_CYCLADES=m
# CONFIG_CYZ_INTR is not set
CONFIG_DIGIEPCA=m
CONFIG_ESPSERIAL=m
CONFIG_MOXA_INTELLIO=m
CONFIG_MOXA_SMARTIO=m
CONFIG_ISI=m
CONFIG_SYNCLINK=m
CONFIG_SYNCLINKMP=m
CONFIG_N_HDLC=m
CONFIG_RISCOM8=m
CONFIG_SPECIALIX=m
CONFIG_SPECIALIX_RTSCTS=y
CONFIG_SX=m
CONFIG_RIO=m
CONFIG_RIO_OLDPCI=y
CONFIG_STALDRV=y
CONFIG_STALLION=m
CONFIG_ISTALLION=m
#
# Serial drivers
#
CONFIG_SERIAL_8250=m
CONFIG_SERIAL_8250_CS=m
CONFIG_SERIAL_8250_EXTENDED=y
CONFIG_SERIAL_8250_MANY_PORTS=y
CONFIG_SERIAL_8250_SHARE_IRQ=y
# CONFIG_SERIAL_8250_DETECT_IRQ is not set
CONFIG_SERIAL_8250_MULTIPORT=y
CONFIG_SERIAL_8250_RSA=y
#
# Non-8250 serial port support
#
CONFIG_SERIAL_CORE=m
CONFIG_UNIX98_PTYS=y
CONFIG_UNIX98_PTY_COUNT=256
CONFIG_PRINTER=m
# CONFIG_LP_CONSOLE is not set
CONFIG_PPDEV=m
CONFIG_TIPAR=m
#
# I2C support
#
CONFIG_I2C=m
CONFIG_I2C_ALGOBIT=m
CONFIG_I2C_PHILIPSPAR=m
CONFIG_I2C_ELV=m
CONFIG_I2C_VELLEMAN=m
CONFIG_SCx200_I2C=m
CONFIG_SCx200_I2C_SCL=12
CONFIG_SCx200_I2C_SDA=13
CONFIG_SCx200_ACB=m
CONFIG_I2C_ALGOPCF=m
CONFIG_I2C_ELEKTOR=m
CONFIG_I2C_CHARDEV=m
CONFIG_I2C_PROC=m
#
# Mice
#
CONFIG_BUSMOUSE=m
CONFIG_QIC02_TAPE=m
CONFIG_QIC02_DYNCONF=y
#
# Setting runtime QIC-02 configuration is done with qic02conf
#
#
# from the tpqic02-support package. It is available at
#
#
# metalab.unc.edu or ftp://titus.cfw.com/pub/Linux/util/
#
#
# Watchdog Cards
#
CONFIG_WATCHDOG=y
CONFIG_WATCHDOG_NOWAYOUT=y
CONFIG_SOFT_WATCHDOG=m
CONFIG_WDT=m
CONFIG_WDTPCI=m
CONFIG_WDT_501=y
CONFIG_WDT_501_FAN=y
CONFIG_PCWATCHDOG=m
CONFIG_ACQUIRE_WDT=m
CONFIG_ADVANTECH_WDT=m
CONFIG_EUROTECH_WDT=m
CONFIG_IB700_WDT=m
CONFIG_I810_TCO=m
CONFIG_MIXCOMWD=m
CONFIG_SCx200_WDT=m
CONFIG_60XX_WDT=m
CONFIG_W83877F_WDT=m
CONFIG_MACHZ_WDT=m
CONFIG_INTEL_RNG=m
CONFIG_AMD_RNG=m
CONFIG_NVRAM=m
CONFIG_RTC=y
CONFIG_DTLK=m
CONFIG_R3964=m
CONFIG_APPLICOM=m
CONFIG_SONYPI=m
#
# Ftape, the floppy tape device driver
#
CONFIG_FTAPE=m
CONFIG_ZFTAPE=m
CONFIG_ZFT_DFLT_BLK_SZ=10240
#
# The compressor will be built as a module only!
#
CONFIG_ZFT_COMPRESSOR=m
CONFIG_FT_NR_BUFFERS=3
CONFIG_FT_PROC_FS=y
CONFIG_FT_NORMAL_DEBUG=y
# CONFIG_FT_FULL_DEBUG is not set
# CONFIG_FT_NO_TRACE is not set
# CONFIG_FT_NO_TRACE_AT_ALL is not set
#
# Hardware configuration
#
CONFIG_FT_STD_FDC=y
# CONFIG_FT_MACH2 is not set
# CONFIG_FT_PROBE_FC10 is not set
# CONFIG_FT_ALT_FDC is not set
CONFIG_FT_FDC_THR=8
CONFIG_FT_FDC_MAX_RATE=2000
CONFIG_FT_ALPHA_CLOCK=0
CONFIG_AGP=m
CONFIG_AGP_INTEL=y
CONFIG_AGP_VIA=y
CONFIG_AGP_AMD=y
CONFIG_AGP_SIS=y
CONFIG_AGP_ALI=y
CONFIG_AGP_SWORKS=y
CONFIG_AGP_AMD_8151=y
CONFIG_DRM=y
CONFIG_DRM_TDFX=m
CONFIG_DRM_R128=m
CONFIG_DRM_RADEON=m
CONFIG_DRM_I810=m
CONFIG_DRM_I830=m
CONFIG_DRM_MGA=m
#
# PCMCIA character devices
#
CONFIG_SYNCLINK_CS=m
CONFIG_MWAVE=m
CONFIG_SCx200_GPIO=m
CONFIG_RAW_DRIVER=m
#
# Multimedia devices
#
CONFIG_VIDEO_DEV=m
#
# Video For Linux
#
CONFIG_VIDEO_PROC_FS=y
#
# Video Adapters
#
CONFIG_VIDEO_BT848=m
CONFIG_VIDEO_PMS=m
CONFIG_VIDEO_BWQCAM=m
CONFIG_VIDEO_CQCAM=m
CONFIG_VIDEO_W9966=m
CONFIG_VIDEO_CPIA=m
CONFIG_VIDEO_CPIA_PP=m
CONFIG_VIDEO_CPIA_USB=m
CONFIG_VIDEO_SAA5249=m
CONFIG_TUNER_3036=m
CONFIG_VIDEO_STRADIS=m
CONFIG_VIDEO_ZORAN=m
CONFIG_VIDEO_ZORAN_BUZ=m
CONFIG_VIDEO_ZORAN_DC10=m
CONFIG_VIDEO_ZORAN_LML33=m
CONFIG_VIDEO_ZR36120=m
CONFIG_VIDEO_MEYE=m
CONFIG_VIDEO_SAA7134=m
#
# Radio Adapters
#
CONFIG_RADIO_CADET=m
CONFIG_RADIO_RTRACK=m
CONFIG_RADIO_RTRACK2=m
CONFIG_RADIO_AZTECH=m
CONFIG_RADIO_GEMTEK=m
CONFIG_RADIO_GEMTEK_PCI=m
CONFIG_RADIO_MAXIRADIO=m
CONFIG_RADIO_MAESTRO=m
CONFIG_RADIO_MIROPCM20=m
CONFIG_RADIO_MIROPCM20_RDS=m
CONFIG_RADIO_SF16FMI=m
CONFIG_RADIO_TERRATEC=m
CONFIG_RADIO_TRUST=m
CONFIG_RADIO_TYPHOON=m
CONFIG_RADIO_TYPHOON_PROC_FS=y
CONFIG_RADIO_ZOLTRIX=m
#
# Digital Video Broadcasting Devices
#
CONFIG_DVB=y
CONFIG_DVB_CORE=m
#
# Supported Frontend Modules
#
CONFIG_DVB_ALPS_BSRU6=m
CONFIG_DVB_ALPS_BSRV2=m
CONFIG_DVB_ALPS_TDLB7=m
CONFIG_DVB_ALPS_TDMB7=m
CONFIG_DVB_GRUNDIG_29504_491=m
CONFIG_DVB_GRUNDIG_29504_401=m
CONFIG_DVB_VES1820=m
#
# Supported DVB Adapters
#
CONFIG_DVB_AV7110=m
CONFIG_DVB_AV7110_OSD=y
#
# File systems
#
CONFIG_QUOTA=y
CONFIG_QFMT_V1=m
CONFIG_QFMT_V2=m
CONFIG_QUOTACTL=y
CONFIG_AUTOFS_FS=m
CONFIG_AUTOFS4_FS=m
CONFIG_REISERFS_FS=m
# CONFIG_REISERFS_CHECK is not set
# CONFIG_REISERFS_PROC_INFO is not set
CONFIG_ADFS_FS=m
# CONFIG_ADFS_FS_RW is not set
CONFIG_AFFS_FS=m
CONFIG_HFS_FS=m
CONFIG_BEFS_FS=m
CONFIG_BEFS_DEBUG=y
CONFIG_BFS_FS=m
CONFIG_EXT3_FS=m
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_JBD=y
CONFIG_JBD_DEBUG=y
CONFIG_FAT_FS=m
CONFIG_MSDOS_FS=m
CONFIG_VFAT_FS=m
CONFIG_EFS_FS=m
CONFIG_JFFS_FS=m
CONFIG_JFFS_FS_VERBOSE=0
CONFIG_JFFS_PROC_FS=y
CONFIG_JFFS2_FS=m
CONFIG_JFFS2_FS_DEBUG=0
CONFIG_JFFS2_FS_NAND=y
CONFIG_CRAMFS=m
CONFIG_TMPFS=y
CONFIG_RAMFS=y
CONFIG_HUGETLBFS=y
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
CONFIG_ZISOFS=y
CONFIG_JFS_FS=m
CONFIG_JFS_POSIX_ACL=y
# CONFIG_JFS_DEBUG is not set
CONFIG_JFS_STATISTICS=y
CONFIG_MINIX_FS=y
CONFIG_VXFS_FS=m
CONFIG_NTFS_FS=m
# CONFIG_NTFS_DEBUG is not set
# CONFIG_NTFS_RW is not set
CONFIG_HPFS_FS=m
CONFIG_PROC_FS=y
# CONFIG_DEVFS_FS is not set
CONFIG_DEVPTS_FS=y
CONFIG_QNX4FS_FS=m
# CONFIG_QNX4FS_RW is not set
CONFIG_ROMFS_FS=m
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_SYSV_FS=m
CONFIG_UDF_FS=m
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
CONFIG_XFS_FS=m
CONFIG_XFS_RT=y
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
#
# Network File Systems
#
CONFIG_CODA_FS=m
CONFIG_INTERMEZZO_FS=m
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_V4=y
CONFIG_ROOT_NFS=y
CONFIG_NFSD=m
CONFIG_NFSD_V3=y
CONFIG_NFSD_V4=y
CONFIG_NFSD_TCP=y
CONFIG_SUNRPC=y
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=m
CONFIG_CIFS=m
CONFIG_SMB_FS=m
CONFIG_SMB_NLS_DEFAULT=y
CONFIG_SMB_NLS_REMOTE="cp437"
CONFIG_NCP_FS=m
CONFIG_NCPFS_PACKET_SIGNING=y
CONFIG_NCPFS_IOCTL_LOCKING=y
CONFIG_NCPFS_STRONG=y
CONFIG_NCPFS_NFS_NS=y
CONFIG_NCPFS_OS2_NS=y
CONFIG_NCPFS_SMALLDOS=y
CONFIG_NCPFS_NLS=y
CONFIG_NCPFS_EXTRAS=y
CONFIG_AFS_FS=m
CONFIG_RXRPC=m
CONFIG_ZISOFS_FS=y
CONFIG_FS_MBCACHE=y
CONFIG_FS_POSIX_ACL=y
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
CONFIG_OSF_PARTITION=y
# CONFIG_AMIGA_PARTITION is not set
CONFIG_ATARI_PARTITION=y
CONFIG_MAC_PARTITION=y
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
# CONFIG_MINIX_SUBPARTITION is not set
CONFIG_SOLARIS_X86_PARTITION=y
CONFIG_UNIXWARE_DISKLABEL=y
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
CONFIG_ULTRIX_PARTITION=y
CONFIG_SUN_PARTITION=y
CONFIG_EFI_PARTITION=y
CONFIG_SMB_NLS=y
CONFIG_NLS=y
#
# Native Language Support
#
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=m
CONFIG_NLS_CODEPAGE_737=m
CONFIG_NLS_CODEPAGE_775=m
CONFIG_NLS_CODEPAGE_850=m
CONFIG_NLS_CODEPAGE_852=m
CONFIG_NLS_CODEPAGE_855=m
CONFIG_NLS_CODEPAGE_857=m
CONFIG_NLS_CODEPAGE_860=m
CONFIG_NLS_CODEPAGE_861=m
CONFIG_NLS_CODEPAGE_862=m
CONFIG_NLS_CODEPAGE_863=m
CONFIG_NLS_CODEPAGE_864=m
CONFIG_NLS_CODEPAGE_865=m
CONFIG_NLS_CODEPAGE_866=m
CONFIG_NLS_CODEPAGE_869=m
CONFIG_NLS_CODEPAGE_936=m
CONFIG_NLS_CODEPAGE_950=m
CONFIG_NLS_CODEPAGE_932=m
CONFIG_NLS_CODEPAGE_949=m
CONFIG_NLS_CODEPAGE_874=m
CONFIG_NLS_ISO8859_8=m
CONFIG_NLS_CODEPAGE_1250=m
CONFIG_NLS_CODEPAGE_1251=m
CONFIG_NLS_ISO8859_1=m
CONFIG_NLS_ISO8859_2=m
CONFIG_NLS_ISO8859_3=m
CONFIG_NLS_ISO8859_4=m
CONFIG_NLS_ISO8859_5=m
CONFIG_NLS_ISO8859_6=m
CONFIG_NLS_ISO8859_7=m
CONFIG_NLS_ISO8859_9=m
CONFIG_NLS_ISO8859_13=m
CONFIG_NLS_ISO8859_14=m
CONFIG_NLS_ISO8859_15=m
CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
#
# Graphics support
#
CONFIG_FB=y
CONFIG_FB_CLGEN=m
CONFIG_FB_PM2=m
CONFIG_FB_PM2_FIFO_DISCONNECT=y
CONFIG_FB_PM2_PCI=y
CONFIG_FB_CYBER2000=m
CONFIG_FB_IMSTT=y
CONFIG_FB_VGA16=m
CONFIG_FB_VESA=y
CONFIG_VIDEO_SELECT=y
CONFIG_FB_HGA=m
CONFIG_FB_RIVA=m
CONFIG_FB_MATROX=m
CONFIG_FB_MATROX_MILLENIUM=y
CONFIG_FB_MATROX_MYSTIQUE=y
CONFIG_FB_MATROX_G450=y
CONFIG_FB_MATROX_G100=y
CONFIG_FB_MATROX_I2C=m
CONFIG_FB_MATROX_MAVEN=m
CONFIG_FB_MATROX_MULTIHEAD=y
CONFIG_FB_RADEON=m
CONFIG_FB_ATY128=m
CONFIG_FB_ATY=m
CONFIG_FB_ATY_CT=y
CONFIG_FB_ATY_GX=y
CONFIG_FB_SIS=m
CONFIG_FB_SIS_300=y
CONFIG_FB_SIS_315=y
CONFIG_FB_NEOMAGIC=m
CONFIG_FB_3DFX=m
CONFIG_FB_VOODOO1=m
CONFIG_FB_TRIDENT=m
CONFIG_FB_PM3=m
# CONFIG_FB_VIRTUAL is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_MDA_CONSOLE=m
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=m
CONFIG_PCI_CONSOLE=y
CONFIG_FBCON_ADVANCED=y
# CONFIG_FONTWIDTH8_ONLY is not set
# CONFIG_FONT_SUN8x16 is not set
# CONFIG_FONT_SUN12x22 is not set
CONFIG_FONTS=y
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_FONT_6x11 is not set
# CONFIG_FONT_PEARL_8x8 is not set
# CONFIG_FONT_ACORN_8x8 is not set
CONFIG_FONT_MINI_4x6=y
#
# Sound
#
CONFIG_SOUND=m
#
# Open Sound System
#
CONFIG_SOUND_PRIME=m
CONFIG_SOUND_BT878=m
CONFIG_SOUND_CMPCI=m
CONFIG_SOUND_CMPCI_FM=y
CONFIG_SOUND_CMPCI_FMIO=0x388
CONFIG_SOUND_CMPCI_MIDI=y
CONFIG_SOUND_CMPCI_MPUIO=0x330
CONFIG_SOUND_CMPCI_JOYSTICK=y
CONFIG_SOUND_CMPCI_CM8738=y
# CONFIG_SOUND_CMPCI_SPDIFINVERSE is not set
CONFIG_SOUND_CMPCI_SPDIFLOOP=y
CONFIG_SOUND_CMPCI_SPEAKERS=2
CONFIG_SOUND_EMU10K1=m
CONFIG_MIDI_EMU10K1=y
CONFIG_SOUND_FUSION=m
CONFIG_SOUND_CS4281=m
CONFIG_SOUND_ES1370=m
CONFIG_SOUND_ES1371=m
CONFIG_SOUND_ESSSOLO1=m
CONFIG_SOUND_MAESTRO=m
CONFIG_SOUND_MAESTRO3=m
CONFIG_SOUND_ICH=m
CONFIG_SOUND_RME96XX=m
CONFIG_SOUND_SONICVIBES=m
CONFIG_SOUND_TRIDENT=m
# CONFIG_SOUND_MSNDCLAS is not set
# CONFIG_SOUND_MSNDPIN is not set
CONFIG_SOUND_VIA82CXXX=m
CONFIG_MIDI_VIA82CXXX=y
CONFIG_SOUND_OSS=m
CONFIG_SOUND_TRACEINIT=y
CONFIG_SOUND_DMAP=y
CONFIG_SOUND_AD1816=m
CONFIG_SOUND_SGALAXY=m
CONFIG_SOUND_ADLIB=m
CONFIG_SOUND_ACI_MIXER=m
CONFIG_SOUND_CS4232=m
CONFIG_SOUND_SSCAPE=m
CONFIG_SOUND_GUS=m
# CONFIG_SOUND_GUS16 is not set
CONFIG_SOUND_GUSMAX=y
CONFIG_SOUND_VMIDI=m
CONFIG_SOUND_TRIX=m
CONFIG_SOUND_MSS=m
CONFIG_SOUND_MPU401=m
CONFIG_SOUND_NM256=m
CONFIG_SOUND_MAD16=m
CONFIG_MAD16_OLDCARD=y
CONFIG_SOUND_PAS=m
CONFIG_SOUND_PSS=m
CONFIG_PSS_MIXER=y
# CONFIG_PSS_HAVE_BOOT is not set
CONFIG_SOUND_SB=m
CONFIG_SOUND_AWE32_SYNTH=m
CONFIG_SOUND_WAVEFRONT=m
CONFIG_SOUND_MAUI=m
CONFIG_SOUND_YM3812=m
CONFIG_SOUND_OPL3SA1=m
CONFIG_SOUND_OPL3SA2=m
CONFIG_SOUND_YMFPCI=m
CONFIG_SOUND_YMFPCI_LEGACY=y
CONFIG_SOUND_UART6850=m
CONFIG_SOUND_AEDSP16=m
CONFIG_SC6600=y
CONFIG_SC6600_JOY=y
CONFIG_SC6600_CDROM=4
CONFIG_SC6600_CDROMBASE=0x0
# CONFIG_AEDSP16_MSS is not set
CONFIG_AEDSP16_SBPRO=y
CONFIG_AEDSP16_MPU401=y
CONFIG_SOUND_TVMIXER=m
#
# Advanced Linux Sound Architecture
#
CONFIG_SND=m
CONFIG_SND_SEQUENCER=m
CONFIG_SND_SEQ_DUMMY=m
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_RTCTIMER=m
CONFIG_SND_VERBOSE_PRINTK=y
CONFIG_SND_DEBUG=y
CONFIG_SND_DEBUG_MEMORY=y
# CONFIG_SND_DEBUG_DETECT is not set
#
# Generic devices
#
CONFIG_SND_DUMMY=m
CONFIG_SND_VIRMIDI=m
CONFIG_SND_MTPAV=m
CONFIG_SND_SERIAL_U16550=m
CONFIG_SND_MPU401=m
#
# ISA devices
#
CONFIG_SND_AD1816A=m
CONFIG_SND_AD1848=m
CONFIG_SND_CS4231=m
CONFIG_SND_CS4232=m
CONFIG_SND_CS4236=m
CONFIG_SND_ES968=m
CONFIG_SND_ES1688=m
CONFIG_SND_ES18XX=m
CONFIG_SND_GUSCLASSIC=m
CONFIG_SND_GUSEXTREME=m
CONFIG_SND_GUSMAX=m
CONFIG_SND_INTERWAVE=m
CONFIG_SND_INTERWAVE_STB=m
CONFIG_SND_OPTI92X_AD1848=m
CONFIG_SND_OPTI92X_CS4231=m
CONFIG_SND_OPTI93X=m
CONFIG_SND_SB8=m
CONFIG_SND_SB16=m
CONFIG_SND_SBAWE=m
CONFIG_SND_SB16_CSP=y
CONFIG_SND_WAVEFRONT=m
CONFIG_SND_ALS100=m
CONFIG_SND_AZT2320=m
CONFIG_SND_CMI8330=m
CONFIG_SND_DT019X=m
CONFIG_SND_OPL3SA2=m
CONFIG_SND_SGALAXY=m
#
# PCI devices
#
CONFIG_SND_ALI5451=m
CONFIG_SND_CS46XX=m
CONFIG_SND_CS46XX_NEW_DSP=y
CONFIG_SND_CS4281=m
CONFIG_SND_EMU10K1=m
CONFIG_SND_KORG1212=m
CONFIG_SND_NM256=m
CONFIG_SND_RME32=m
CONFIG_SND_RME96=m
CONFIG_SND_RME9652=m
CONFIG_SND_HDSP=m
CONFIG_SND_TRIDENT=m
CONFIG_SND_YMFPCI=m
CONFIG_SND_ALS4000=m
CONFIG_SND_CMIPCI=m
CONFIG_SND_ENS1370=m
CONFIG_SND_ENS1371=m
CONFIG_SND_ES1938=m
CONFIG_SND_ES1968=m
CONFIG_SND_MAESTRO3=m
CONFIG_SND_FM801=m
CONFIG_SND_ICE1712=m
CONFIG_SND_INTEL8X0=m
CONFIG_SND_SONICVIBES=m
CONFIG_SND_VIA82XX=m
#
# ALSA USB devices
#
CONFIG_SND_USB_AUDIO=m
#
# USB support
#
CONFIG_USB=m
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
CONFIG_USB_DYNAMIC_MINORS=y
#
# USB Host Controller Drivers
#
CONFIG_USB_EHCI_HCD=m
CONFIG_USB_OHCI_HCD=m
CONFIG_USB_UHCI_HCD=m
#
# USB Device Class drivers
#
CONFIG_USB_AUDIO=m
CONFIG_USB_BLUETOOTH_TTY=m
CONFIG_USB_MIDI=m
CONFIG_USB_ACM=m
CONFIG_USB_PRINTER=m
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
CONFIG_USB_STORAGE_DPCM=y
CONFIG_USB_STORAGE_HP8200e=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
#
# USB Human Interface Devices (HID)
#
CONFIG_USB_HID=m
CONFIG_USB_HIDINPUT=y
CONFIG_HID_FF=y
CONFIG_HID_PID=y
CONFIG_LOGITECH_FF=y
CONFIG_USB_HIDDEV=y
#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
CONFIG_USB_AIPTEK=m
CONFIG_USB_WACOM=m
CONFIG_USB_POWERMATE=m
CONFIG_USB_XPAD=m
#
# USB Imaging devices
#
CONFIG_USB_MDC800=m
CONFIG_USB_SCANNER=m
CONFIG_USB_MICROTEK=m
CONFIG_USB_HPUSBSCSI=m
#
# USB Multimedia devices
#
CONFIG_USB_DABUSB=m
CONFIG_USB_VICAM=m
CONFIG_USB_DSBR=m
CONFIG_USB_IBMCAM=m
CONFIG_USB_KONICAWC=m
CONFIG_USB_OV511=m
CONFIG_USB_PWC=m
CONFIG_USB_SE401=m
CONFIG_USB_STV680=m
#
# USB Network adaptors
#
CONFIG_USB_CATC=m
CONFIG_USB_CDCETHER=m
CONFIG_USB_KAWETH=m
CONFIG_USB_PEGASUS=m
CONFIG_USB_RTL8150=m
CONFIG_USB_USBNET=m
#
# USB port drivers
#
CONFIG_USB_USS720=m
#
# USB Serial Converter support
#
CONFIG_USB_SERIAL=m
CONFIG_USB_SERIAL_GENERIC=y
CONFIG_USB_SERIAL_BELKIN=m
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
CONFIG_USB_SERIAL_VISOR=m
CONFIG_USB_SERIAL_IPAQ=m
CONFIG_USB_SERIAL_IR=m
CONFIG_USB_SERIAL_EDGEPORT=m
CONFIG_USB_SERIAL_EDGEPORT_TI=m
CONFIG_USB_SERIAL_KEYSPAN_PDA=m
CONFIG_USB_SERIAL_KEYSPAN=m
CONFIG_USB_SERIAL_KEYSPAN_USA28=y
CONFIG_USB_SERIAL_KEYSPAN_USA28X=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XA=y
CONFIG_USB_SERIAL_KEYSPAN_USA28XB=y
CONFIG_USB_SERIAL_KEYSPAN_USA19=y
CONFIG_USB_SERIAL_KEYSPAN_USA18X=y
CONFIG_USB_SERIAL_KEYSPAN_USA19W=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QW=y
CONFIG_USB_SERIAL_KEYSPAN_USA19QI=y
CONFIG_USB_SERIAL_KEYSPAN_USA49W=y
CONFIG_USB_SERIAL_KLSI=m
CONFIG_USB_SERIAL_KOBIL_SCT=m
CONFIG_USB_SERIAL_MCT_U232=m
CONFIG_USB_SERIAL_PL2303=m
CONFIG_USB_SERIAL_SAFE=m
CONFIG_USB_SERIAL_SAFE_PADDED=y
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
CONFIG_USB_SERIAL_OMNINET=m
CONFIG_USB_EZUSB=y
#
# USB Miscellaneous drivers
#
CONFIG_USB_EMI26=m
CONFIG_USB_TIGL=m
CONFIG_USB_AUERSWALD=m
CONFIG_USB_RIO500=m
CONFIG_USB_BRLVGER=m
CONFIG_USB_LCD=m
CONFIG_USB_SPEEDTOUCH=m
CONFIG_USB_TEST=m
#
# Bluetooth support
#
CONFIG_BT=m
CONFIG_BT_L2CAP=m
CONFIG_BT_SCO=m
CONFIG_BT_RFCOMM=m
CONFIG_BT_RFCOMM_TTY=y
CONFIG_BT_BNEP=m
CONFIG_BT_BNEP_MC_FILTER=y
CONFIG_BT_BNEP_PROTO_FILTER=y
#
# Bluetooth device drivers
#
CONFIG_BT_HCIUSB=m
# CONFIG_BT_USB_ZERO_PACKET is not set
CONFIG_BT_HCIUART=m
CONFIG_BT_HCIUART_H4=y
CONFIG_BT_HCIUART_BCSP=y
CONFIG_BT_HCIDTL1=m
CONFIG_BT_HCIBT3C=m
CONFIG_BT_HCIBLUECARD=m
CONFIG_BT_HCIVHCI=m
#
# Profiling support
#
CONFIG_PROFILING=y
CONFIG_OPROFILE=m
#
# Kernel hacking
#
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_SLAB is not set
# CONFIG_DEBUG_IOVIRT is not set
CONFIG_MAGIC_SYSRQ=y
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_HIGHMEM is not set
# CONFIG_KALLSYMS is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_FRAME_POINTER is not set
CONFIG_X86_EXTRA_IRQS=y
CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
#
# Security options
#
CONFIG_SECURITY=y
CONFIG_SECURITY_CAPABILITIES=y
CONFIG_SECURITY_ROOTPLUG=m
#
# Cryptographic options
#
CONFIG_CRYPTO=y
CONFIG_CRYPTO_HMAC=y
CONFIG_CRYPTO_NULL=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=m
CONFIG_CRYPTO_SHA1=m
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_DES=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_SERPENT=m
CONFIG_CRYPTO_TEST=m
#
# Library routines
#
CONFIG_CRC32=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_X86_BIOS_REBOOT=y
[-- Attachment #2: Type: application/pgp-signature, Size: 481 bytes --]
^ permalink raw reply
* Re: MySQL or postgreSQL which is the best?
From: earl @ 2002-12-11 6:22 UTC (permalink / raw)
To: lisa leblanc, linux-admin
In-Reply-To: <F169DEt6kDzyDpTCGab00007bf2@hotmail.com>
Some say that if it's just a small scale database
then MySQL is the way to go but if you're planning
to put up a large database then postgreSQL is the answer.
----- Original Message -----
From: "lisa leblanc" <pinguinlinux@hotmail.com>
To: <linux-admin@vger.kernel.org>
Sent: Tuesday, December 10, 2002 10:00 PM
Subject: MySQL or postgreSQL which is the best?
> I have to choose between these databases and I do not know which is the
> best. What do you think?
> Lisa
>
>
>
>
>
> _________________________________________________________________
> The new MSN 8: smart spam protection and 2 months FREE*
> http://join.msn.com/?page=features/junkmail
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-admin" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
^ permalink raw reply
* Re: portfw on iptables 2.4 kernel problem.
From: Raymond Leach @ 2002-12-11 6:20 UTC (permalink / raw)
To: louie miranda; +Cc: Netfilter Mailing List
In-Reply-To: <00d301c2a0db$c8c2b240$0b00000a@nocpc3>
[-- Attachment #1: Type: text/plain, Size: 4277 bytes --]
Here are the rules I use for ftp outbound from my internal network :
IPTABLES="/usr/sbin/iptables"
NET_INT="10.0.0.0/24"
IFACE_INET="eth0"
IFACE_INT="eth2"
IFACE_DMZ="eth1"
IFACE_LOC="lo"
$ip="10.0.0.67" # My workstation ip
$IPTABLES -A FORWARD -i $IFACE_INT -p tcp --dport 20:21 -s $ip -m state
--state NEW,ESTABLISHED,RELATED -j ACCEPT
$IPTABLES -A FORWARD -i $IFACE_INT -p tcp --dport 1024: -s $ip
-m state --state NEW,ESTABLISHED,RELATED -j ACCEPT
$IPTABLES -A FORWARD -i $IFACE_INT -p udp --dport 1024: -s $ip
-m state --state NEW,ESTABLISHED,RELATED -j ACCEPT
$IPTABLES -A FORWARD -i $IFACE_INET -p tcp --sport 20:21 -d $ip -m state
--state ESTABLISHED,RELATED -j ACCEPT
$IPTABLES -A FORWARD -i $IFACE_INET -p tcp --sport 1024: -d $ip
-m state --state ESTABLISHED,RELATED -j ACCEPT
$IPTABLES -A FORWARD -i $IFACE_INET -p udp --sport 1024: -d $ip
-m state --state ESTABLISHED,RELATED -j ACCEPT
$IPTABLES -t nat -A POSTROUTING -o $IFACE_INET -p tcp --dport 20:21 -s
$ip -j SNAT --to-source $IP_INET
$IPTABLES -t nat -A POSTROUTING -o $IFACE_INET -p tcp --dport
1024: -s $ip -j SNAT --to-source $IP_INET
Enjoy!
Ray
On Wed, 2002-12-11 at 08:08, louie miranda wrote:
> Hi, thanks for all your replies, etc. But my problem is not yet solved. I
> dont know why?!
> Can someone give me how did they did it?
>
>
>
> --
> thanks,
> louie miranda
>
>
> ----- Original Message -----
> From: "Jozsef Kadlecsik" <kadlec@blackhole.kfki.hu>
> To: "Raymond Leach" <raymondl@knowledgefactory.co.za>
> Cc: <rsterenborg@xs4all.nl>; "'Paulo Andre'" <pandre@darkstar.nom.za>;
> "'louie miranda'" <lmiranda@chikka.com>; "'netfilter'"
> <netfilter@lists.netfilter.org>
> Sent: Tuesday, December 10, 2002 7:22 PM
> Subject: RE: portfw on iptables 2.4 kernel problem.
>
>
> > On 10 Dec 2002, Raymond Leach wrote:
> >
> > > Yes, you do. Port 20 (and/or any other) connections after the control
> > > connection are not 'RELATED, ESTABLISHED' to the control connection.
> > > They are new connections either from the client to the server or vice
> > > versa. You therefore need seperate rules for them.
> >
> > If we are speaking about the data channels of the supported protocols
> > (FTP, IRC and all the other protocols from p-o-m), then this is absolutely
> > false.
> >
> > > Remember connection tracking happens at a pakcet level, i.e all states
> > > relate to packets of a connection, not per protocol.
> >
> > In the case of the supported protocols with additional channels, again,
> > untrue. Please do no spread false info! Why would then the RELATED state
> > exist?
> >
> > > > However, I'm not sure if it's better to split them up into 2 rules :
> > > > iptables -A FORWARD -i eth0 -o eth1 -p tcp --dport 21 -m state --state
> > > > NEW -j ACCEPT
> > > > iptables -A FORWARD -i eth0 -o eth1 -m state --state
> ESTABLISHED,RELATED
> > > > -j ACCEPT
> >
> > Because the destination port of the data channels cannot be port 21,
> > therefore you must use two rules. And because you specify the
> > incoming/outgoing interfaces, you need a third rule for the reply packets
> > as well.
> >
> > Regards,
> > Jozsef
> > -
> > E-mail : kadlec@blackhole.kfki.hu, kadlec@sunserv.kfki.hu
> > PGP key : http://www.kfki.hu/~kadlec/pgp_public_key.txt
> > Address : KFKI Research Institute for Particle and Nuclear Physics
> > H-1525 Budapest 114, POB. 49, Hungary
> >
> >
> >
--
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
( Raymond Leach )
) Knowledge Factory (
( )
) Tel: +27 11 445 8100 (
( Fax: +27 11 445 8101 )
) (
( http://www.knowledgefactory.co.za/ )
) http://www.saptg.co.za/ (
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
o o
o o
.--. .--.
| o_o| |o_o |
| \_:| |:_/ |
/ / \\ // \ \
( | |) (| | )
/`\_ _/'\ /'\_ _/`\
\___)=(___/ \___)=(___/
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 189 bytes --]
^ permalink raw reply
* [PATCH] epoll: don't printk pointer value
From: Robert Love @ 2002-12-11 6:27 UTC (permalink / raw)
To: davidel; +Cc: linux-kernel
Davide,
I really cannot think of a good reason why eventpoll_init() should print
a pointer value to user-space - especially the value of current?
I do not think this is good practice and someone might even consider it
a security hole. Personally, I would prefer to remove the "successfully
initialized" message altogether, but at the very least can we not print
current's address?
Robert Love
fs/eventpoll.c | 2 +-
1 files changed, 1 insertion(+), 1 deletion(-)
diff -urN linux-2.5.51/fs/eventpoll.c linux/fs/eventpoll.c
--- linux-2.5.51/fs/eventpoll.c 2002-12-09 21:45:54.000000000 -0500
+++ linux/fs/eventpoll.c 2002-12-11 01:23:07.000000000 -0500
@@ -1573,7 +1573,7 @@
if (IS_ERR(eventpoll_mnt))
goto eexit_4;
- printk(KERN_INFO "[%p] eventpoll: successfully initialized.\n", current);
+ printk(KERN_INFO "eventpoll: successfully initialized.\n", current);
return 0;
^ permalink raw reply
* Re: IDE feature request & problem
From: Milton D. Miller II @ 2002-12-11 6:26 UTC (permalink / raw)
To: Milan Roubal; +Cc: linux-kernel
(Barry pointed out the errors are all 7F.)
And the sector LBA is hex 808087F7F7F (high 80808 low 7f7f7f)
do you get this repeatedly?
milton
^ permalink raw reply
* Re: atyfb in 2.5.51
From: James Simmons @ 2002-12-11 6:18 UTC (permalink / raw)
To: Benjamin Herrenschmidt
Cc: Paul Mackerras, Linux Kernel Mailing List,
Linux Fbdev development list
In-Reply-To: <1039561870.538.28.camel@zion>
> AFAIK, the X "mach64" driver in XF 4.* doesn't care about UseFBDev.
> Marc Aurele La France (maintainer of this driver) is basically allergic
> to kernel fbdev support.
:-(
> I don't know if happened with earlier fbdev versions for you, but one
> possibility is that X reconfigures the display base, and possibly more
> bits of the card's internal memory map. Either fbdev should restore
> that, or adapt to what X set. On R128's and radeon's, this is things
> like DISPLAY_BASE_ADDR.
I will have to go threw the X code to fix that :-(
> > I have also tried aty128fb with some local patches to get it to
> > compile for my G4 powerbook. It also doesn't draw the penguin, and it
> > oopses when X starts, for some reason.
>
> Hrm... I'll have to test radeonfb... It worked yesteday in console (I
> don't remember about the penguin) but I didn't try X.
No penguin. That is weird. I get the penguin on my ix86 box.
^ permalink raw reply
* Re: 2.5.51 -- rivafb is whacky (characters flipped on vertical axis, 640x480 usable area shown inside a higher-res area, etc).
From: Miles Lane @ 2002-12-11 6:10 UTC (permalink / raw)
To: James Simmons; +Cc: linux-fbdev-devel
In-Reply-To: <Pine.LNX.4.33.0212102136050.2617-100000@maxwell.earthlink.net>
James, I appreciate all your hard work. I hope my bug report
isn't too upsetting for you. I think you are making great progress.
It is also a shame that so much of the driver porting has fallen
on your shoulders. If I were a programmer. I'd help, but my skills
are in software testing, for the most part.
All the best,
Miles
James Simmons wrote:
>>I have tried getting rivafb to work in 2.5.51. It is much better
>>than before (thanks!). It compiles and sorta works.
>
>
> Ug. Now that several drivers compile now I get bug reports :-( I'm getting
> alot of positive feedback as well as one negative source.
>
>
>>Here are the problems:
>>
>>When I run "fbset -a 640x480", I get display that fills
>>the screen and looks okay, but most of the characters are
>>flipped along the vertical axis, so they are backwards, so that:
>>
>>+---- ----+
>>| |
>>+--- becomes ---+
>>| |
>>| |
>
>
> Okay. That is weird. I have this card so I will give it a try.
>
>
>>Also, when I boot, the penguin logo looks like it is being rendered
>>in about five colors.
>
>
> Yipes. Imageblit sounds broken.
>
>
>>In addition, the text is black, except for
>>the white underscore cursor, so all I can see is the cursor.
>
>
> I noticed this. The color palette is for some reason messed up.
>
>
>>When the gpm gets loaded, the mouse pointer, instead of showing
>>a white rectangle that, when it passes over a character, shows that
>>character in reverse-video, shows a colored cursor that always
>>contains some character. The character shown in the mouse cursor
>>changes when it passes over text in the window, but it never shows
>>the character it is passing over.
>
>
> Same things. Color palette is messed up.
>
>
>>Lastly, when I run "fbset -a 1600x1200", a 640x480 area shows
>>a usable console window, but it is embedded in the larger high
>>resolution display, like this:
>>
>> +---------+----------------+
>> | | |
>> | | |
>> | | |
>> +---------+ |
>> | |
>> | |
>> | |
>> | |
>> | |
>> +--------------------------+
>>
>>The area outside of the 640x480 boundary is filled with colored
>>junk (no characters).
>>
>>Any ideas?
>
>
> Yeap. I migrated changing the console from /dev/fb to actually using the
> tty layer. I haven't merged those changes yet but you will be able to do a
>
> stty -f /dev/ttyX 80 col 50 row
>
> and change the video mode.
>
> So I didn't plan to push so soon but I kept getting emails about various
> drivers being broken. So I did this push to make more drivers work.
> Unfortuenly I sent a watered down fbcon system.
>
>
>
>
>
>
-------------------------------------------------------
This sf.net email is sponsored by:
With Great Power, Comes Great Responsibility
Learn to use your power at OSDN's High Performance Computing Channel
http://hpc.devchannel.org/
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.