question about parameter settings.

question about parameter settings.

[Don Gulotta]

I have a question about the parameters that need to be passed to CS46xx.
 I am running Suse Linux 9.2 and it automatically finds the CS46xx but I
get no sound.  I have looked at the Alsa documentation and the parameter
lists but don't know what the actual values should be.  I only see three
to configure in Yast2 hardware config for the card yet I see 6 in the
documentation.  I get the last three to configure.   

description: "Cirrus Logic Sound Fusion CS46XX" 

author: "Jaroslav Kysela " 

license: "GPL" 

parm: index int array (min = 1, max = 8), description "Index value for
the CS46xx soundcard." 

parm: id string array (min = 1, max = 8), description "ID string for
the CS46xx soundcard." 

parm: enable int array (min = 1, max = 8), description "Enable CS46xx
soundcard." 

parm: external_amp int array (min = 1, max = 8), description "Force to
enable external amplifer." 

parm: thinkpad int array (min = 1, max = 8), description "Force to
enable Thinkpad's CLKRUN control." 

parm: mmap_valid int array (min = 1, max = 8), description "Support OSS
mmap." 


Don Gulotta
Member Technical Staff
MCSE W2k,MCNE,CCNA,Unix Admin
Computer Sciences Corporation
 
1 Tower Lane, Suite 400
Oakbrook Terrace, IL 60181 USA
Direct: 630.990.4867
Fax: 630.990.4832
Email: dgulotta@alliance.csc.com 
Aim: dlg2609


-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues
Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek.
It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt

Re: question about parameter settings.

[Lee Revell]

On Thu, 2005-01-06 at 07:40 -0600, Don Gulotta wrote:
> I have a question about the parameters that need to be passed to CS46xx.
>  I am running Suse Linux 9.2 and it automatically finds the CS46xx but I
> get no sound.  I have looked at the Alsa documentation and the parameter
> lists but don't know what the actual values should be.  I only see three
> to configure in Yast2 hardware config for the card yet I see 6 in the
> documentation.  I get the last three to configure.   

You really should not need to pass any parameters.  Are you sure it's
not a mixer settings issue?

Lee



-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues
Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek.
It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt