* Tascam US-224 support @ 2004-02-16 21:23 Martin Langer 2004-02-17 15:34 ` Takashi Iwai 0 siblings, 1 reply; 7+ messages in thread From: Martin Langer @ 2004-02-16 21:23 UTC (permalink / raw) To: alsa-devel; +Cc: Karsten Wiese, David Hi, I vote for applying both Tascam US-224 patches: http://www.mail-archive.com/alsa-devel@lists.sourceforge.net/msg11281.html http://www.mail-archive.com/alsa-devel@lists.sourceforge.net/msg11311.html David Coulm has reported that the US-224 works now. The US-224 depends on usx2yloader like the other two guys called us122 and us428. The us224 is a controller device like the us428 and so it also depends on the us428control utility. BTW: I don't insist on renaming us428control, but probably it would avoid a few bugreports... bye, martin -- ------------------------------------------------------- SF.Net is sponsored by: Speed Start Your Linux Apps Now. Build and deploy apps & Web services for Linux with a free DVD software kit from IBM. Click Now! http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Tascam US-224 support 2004-02-16 21:23 Tascam US-224 support Martin Langer @ 2004-02-17 15:34 ` Takashi Iwai 2004-02-17 21:41 ` Martin Langer 0 siblings, 1 reply; 7+ messages in thread From: Takashi Iwai @ 2004-02-17 15:34 UTC (permalink / raw) To: Martin Langer; +Cc: alsa-devel, Karsten Wiese, David At Mon, 16 Feb 2004 22:23:52 +0100, Martin Langer wrote: > > > Hi, > > I vote for applying both Tascam US-224 patches: > > http://www.mail-archive.com/alsa-devel@lists.sourceforge.net/msg11281.html > http://www.mail-archive.com/alsa-devel@lists.sourceforge.net/msg11311.html thanks, now it's on cvs. > David Coulm has reported that the US-224 works now. The US-224 depends > on usx2yloader like the other two guys called us122 and us428. The us224 is a > controller device like the us428 and so it also depends on the us428control > utility. > > BTW: I don't insist on renaming us428control, but probably it would avoid > a few bugreports... i think it's ok to keep the name. even the usx2y rule would be broken if tascam releases us438 or so... Takashi ------------------------------------------------------- SF.Net is sponsored by: Speed Start Your Linux Apps Now. Build and deploy apps & Web services for Linux with a free DVD software kit from IBM. Click Now! http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Tascam US-224 support 2004-02-17 15:34 ` Takashi Iwai @ 2004-02-17 21:41 ` Martin Langer 2004-02-18 16:27 ` Takashi Iwai 0 siblings, 1 reply; 7+ messages in thread From: Martin Langer @ 2004-02-17 21:41 UTC (permalink / raw) To: Takashi Iwai; +Cc: alsa-devel, Karsten Wiese, David On Tue, Feb 17, 2004 at 04:34:34PM +0100, Takashi Iwai wrote: > At Mon, 16 Feb 2004 22:23:52 +0100, > Martin Langer wrote: > > > > I vote for applying both Tascam US-224 patches: > > > > http://www.mail-archive.com/alsa-devel@lists.sourceforge.net/msg11281.html > > http://www.mail-archive.com/alsa-devel@lists.sourceforge.net/msg11311.html > > thanks, now it's on cvs. alsa-firmware/usx2yloader/usx2y.prepad can be removed now. (That file is replaced by us224.prepad and us122.prepad) > even the usx2y rule would be broken if tascam releases us438 or so... They should ask us before releasing it :) martin -- ------------------------------------------------------- SF.Net is sponsored by: Speed Start Your Linux Apps Now. Build and deploy apps & Web services for Linux with a free DVD software kit from IBM. Click Now! http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Tascam US-224 support 2004-02-17 21:41 ` Martin Langer @ 2004-02-18 16:27 ` Takashi Iwai 2004-02-19 23:40 ` Start us224control via hotplug. was: " Karsten Wiese 0 siblings, 1 reply; 7+ messages in thread From: Takashi Iwai @ 2004-02-18 16:27 UTC (permalink / raw) To: Martin Langer; +Cc: alsa-devel, Karsten Wiese, David At Tue, 17 Feb 2004 22:41:33 +0100, Martin Langer wrote: > > On Tue, Feb 17, 2004 at 04:34:34PM +0100, Takashi Iwai wrote: > > At Mon, 16 Feb 2004 22:23:52 +0100, > > Martin Langer wrote: > > > > > > I vote for applying both Tascam US-224 patches: > > > > > > http://www.mail-archive.com/alsa-devel@lists.sourceforge.net/msg11281.html > > > http://www.mail-archive.com/alsa-devel@lists.sourceforge.net/msg11311.html > > > > thanks, now it's on cvs. > > alsa-firmware/usx2yloader/usx2y.prepad can be removed now. (That file is > replaced by us224.prepad and us122.prepad) ok, done. Takashi ------------------------------------------------------- SF.Net is sponsored by: Speed Start Your Linux Apps Now. Build and deploy apps & Web services for Linux with a free DVD software kit from IBM. Click Now! http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click ^ permalink raw reply [flat|nested] 7+ messages in thread
* Start us224control via hotplug. was: Re: Tascam US-224 support 2004-02-18 16:27 ` Takashi Iwai @ 2004-02-19 23:40 ` Karsten Wiese 2004-02-20 10:50 ` Takashi Iwai 0 siblings, 1 reply; 7+ messages in thread From: Karsten Wiese @ 2004-02-19 23:40 UTC (permalink / raw) To: Takashi Iwai, Martin Langer; +Cc: alsa-devel, David this is a patch against /alsa-tools/usx2yloader/tascam_fpga.in: >>>>>> Index: tascam_fpga.in =================================================================== RCS file: /cvsroot/alsa/alsa-tools/usx2yloader/tascam_fpga.in,v retrieving revision 1.4 diff -u -r1.4 tascam_fpga.in --- tascam_fpga.in 19 Jan 2004 18:49:21 -0000 1.4 +++ tascam_fpga.in 19 Feb 2004 22:16:04 -0000 @@ -23,6 +23,9 @@ 1604/8001/*) CONTROLLER=@bindir@/us428control ;; +1604/8005/*) + CONTROLLER=@bindir@/us224control + ;; *) ;; esac <<<<<< unfortunately this patch is only half of what it should be: "us224control" is meant to be created from "ln -s us428control us224control" how would we integrate this "ln -s us428control us224control" into Makefile.am ? or should we just cp the symbolic link? but then: can you put the symbolic link created by "ln -s us428control us224control" into CVS? if nobody knows, here is what works out of the box: >>>>>> Index: tascam_fpga.in =================================================================== RCS file: /cvsroot/alsa/alsa-tools/usx2yloader/tascam_fpga.in,v retrieving revision 1.4 diff -u -r1.4 tascam_fpga.in --- tascam_fpga.in 19 Jan 2004 18:49:21 -0000 1.4 +++ tascam_fpga.in 19 Feb 2004 22:16:04 -0000 @@ -23,6 +23,9 @@ 1604/8001/*) CONTROLLER=@bindir@/us428control ;; +1604/8005/*) + CONTROLLER=@bindir@/us428control + ;; *) ;; esac <<<<<< best regards, Karsten ------------------------------------------------------- SF.Net is sponsored by: Speed Start Your Linux Apps Now. Build and deploy apps & Web services for Linux with a free DVD software kit from IBM. Click Now! http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Start us224control via hotplug. was: Re: Tascam US-224 support 2004-02-19 23:40 ` Start us224control via hotplug. was: " Karsten Wiese @ 2004-02-20 10:50 ` Takashi Iwai 2004-02-23 15:49 ` Karsten Wiese 0 siblings, 1 reply; 7+ messages in thread From: Takashi Iwai @ 2004-02-20 10:50 UTC (permalink / raw) To: Karsten Wiese; +Cc: Martin Langer, alsa-devel, David At Fri, 20 Feb 2004 00:40:32 +0100, Karsten Wiese wrote: > > this is a patch against /alsa-tools/usx2yloader/tascam_fpga.in: > > >>>>>> > Index: tascam_fpga.in > =================================================================== > RCS file: /cvsroot/alsa/alsa-tools/usx2yloader/tascam_fpga.in,v > retrieving revision 1.4 > diff -u -r1.4 tascam_fpga.in > --- tascam_fpga.in 19 Jan 2004 18:49:21 -0000 1.4 > +++ tascam_fpga.in 19 Feb 2004 22:16:04 -0000 > @@ -23,6 +23,9 @@ > 1604/8001/*) > CONTROLLER=@bindir@/us428control > ;; > +1604/8005/*) > + CONTROLLER=@bindir@/us224control > + ;; > *) > ;; > esac > <<<<<< > > unfortunately this patch is only half of what it should be: > "us224control" is meant to be created from "ln -s us428control us224control" is it necessary for performance except for the sane naming? for example, in the case of aplay/arecord, both of them are the same binary but perform differently according to the executed name. if it's not the case, i'd like to keep the same name. > how would we integrate this "ln -s us428control us224control" into Makefile.am > ? or should we just cp the symbolic link? but then: can you put the symbolic > link created by "ln -s us428control us224control" into CVS? > > if nobody knows, here is what works out of the box: > > >>>>>> > Index: tascam_fpga.in > =================================================================== > RCS file: /cvsroot/alsa/alsa-tools/usx2yloader/tascam_fpga.in,v > retrieving revision 1.4 > diff -u -r1.4 tascam_fpga.in > --- tascam_fpga.in 19 Jan 2004 18:49:21 -0000 1.4 > +++ tascam_fpga.in 19 Feb 2004 22:16:04 -0000 > @@ -23,6 +23,9 @@ > 1604/8001/*) > CONTROLLER=@bindir@/us428control > ;; > +1604/8005/*) > + CONTROLLER=@bindir@/us428control > + ;; > *) > ;; > esac that's fine. Takashi ------------------------------------------------------- SF.Net is sponsored by: Speed Start Your Linux Apps Now. Build and deploy apps & Web services for Linux with a free DVD software kit from IBM. Click Now! http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Start us224control via hotplug. was: Re: Tascam US-224 support 2004-02-20 10:50 ` Takashi Iwai @ 2004-02-23 15:49 ` Karsten Wiese 0 siblings, 0 replies; 7+ messages in thread From: Karsten Wiese @ 2004-02-23 15:49 UTC (permalink / raw) To: Takashi Iwai; +Cc: Martin Langer, alsa-devel, David Am Freitag, 20. Februar 2004 11:50 schrieb Takashi Iwai: > At Fri, 20 Feb 2004 00:40:32 +0100, > > Karsten Wiese wrote: > > this is a patch against /alsa-tools/usx2yloader/tascam_fpga.in: > > > > > > Index: tascam_fpga.in > > =================================================================== > > RCS file: /cvsroot/alsa/alsa-tools/usx2yloader/tascam_fpga.in,v > > retrieving revision 1.4 > > diff -u -r1.4 tascam_fpga.in > > --- tascam_fpga.in 19 Jan 2004 18:49:21 -0000 1.4 > > +++ tascam_fpga.in 19 Feb 2004 22:16:04 -0000 > > @@ -23,6 +23,9 @@ > > 1604/8001/*) > > CONTROLLER=@bindir@/us428control > > ;; > > +1604/8005/*) > > + CONTROLLER=@bindir@/us224control > > + ;; > > *) > > ;; > > esac > > <<<<<< > > > > unfortunately this patch is only half of what it should be: > > "us224control" is meant to be created from "ln -s us428control > > us224control" > > is it necessary for performance except for the sane naming? > for example, in the case of aplay/arecord, both of them are the same > binary but perform differently according to the executed name. > if it's not the case, i'd like to keep the same name. sane naming only so far. > > > how would we integrate this "ln -s us428control us224control" into > > Makefile.am ? or should we just cp the symbolic link? but then: can you > > put the symbolic link created by "ln -s us428control us224control" into > > CVS? > > > > if nobody knows, here is what works out of the box: > > > > > > Index: tascam_fpga.in > > =================================================================== > > RCS file: /cvsroot/alsa/alsa-tools/usx2yloader/tascam_fpga.in,v > > retrieving revision 1.4 > > diff -u -r1.4 tascam_fpga.in > > --- tascam_fpga.in 19 Jan 2004 18:49:21 -0000 1.4 > > +++ tascam_fpga.in 19 Feb 2004 22:16:04 -0000 > > @@ -23,6 +23,9 @@ > > 1604/8001/*) > > CONTROLLER=@bindir@/us428control > > ;; > > +1604/8005/*) > > + CONTROLLER=@bindir@/us428control > > + ;; > > *) > > ;; > > esac > > that's fine. please commit the 'fine' version: >>>>>> Index: tascam_fpga.in =================================================================== RCS file: /cvsroot/alsa/alsa-tools/usx2yloader/tascam_fpga.in,v retrieving revision 1.4 diff -u -r1.4 tascam_fpga.in --- tascam_fpga.in 19 Jan 2004 18:49:21 -0000 1.4 +++ tascam_fpga.in 19 Feb 2004 22:16:04 -0000 @@ -23,6 +23,9 @@ 1604/8001/*) CONTROLLER=@bindir@/us428control ;; +1604/8005/*) + CONTROLLER=@bindir@/us428control + ;; *) ;; esac <<<<<< thanks, Karsten ------------------------------------------------------- SF.Net is sponsored by: Speed Start Your Linux Apps Now. Build and deploy apps & Web services for Linux with a free DVD software kit from IBM. Click Now! http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click ^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2004-02-23 15:49 UTC | newest] Thread overview: 7+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2004-02-16 21:23 Tascam US-224 support Martin Langer 2004-02-17 15:34 ` Takashi Iwai 2004-02-17 21:41 ` Martin Langer 2004-02-18 16:27 ` Takashi Iwai 2004-02-19 23:40 ` Start us224control via hotplug. was: " Karsten Wiese 2004-02-20 10:50 ` Takashi Iwai 2004-02-23 15:49 ` Karsten Wiese
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.