Tascam US-224 support

Tascam US-224 support

[Martin Langer]

Hi,

I vote for applying both Tascam US-224 patches:

http://www.mail-archive.com/alsa-devel@lists.sourceforge.net/msg11281.html
http://www.mail-archive.com/alsa-devel@lists.sourceforge.net/msg11311.html

David Coulm has reported that the US-224 works now. The US-224 depends
on usx2yloader like the other two guys called us122 and us428. The us224 is a
controller device like the us428 and so it also depends on the us428control
utility. 

BTW: I don't insist on renaming us428control, but probably it would avoid
a few bugreports... 


bye,
martin

-- 


-------------------------------------------------------
SF.Net is sponsored by: Speed Start Your Linux Apps Now.
Build and deploy apps & Web services for Linux with
a free DVD software kit from IBM. Click Now!
http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click

Re: Tascam US-224 support

[Takashi Iwai]

At Mon, 16 Feb 2004 22:23:52 +0100,
Martin Langer wrote:
> 
> 
> Hi,
> 
> I vote for applying both Tascam US-224 patches:
> 
> http://www.mail-archive.com/alsa-devel@lists.sourceforge.net/msg11281.html
> http://www.mail-archive.com/alsa-devel@lists.sourceforge.net/msg11311.html

thanks, now it's on cvs.


> David Coulm has reported that the US-224 works now. The US-224 depends
> on usx2yloader like the other two guys called us122 and us428. The us224 is a
> controller device like the us428 and so it also depends on the us428control
> utility. 
> 
> BTW: I don't insist on renaming us428control, but probably it would avoid
> a few bugreports... 

i think it's ok to keep the name.
even the usx2y rule would be broken if tascam releases us438 or so...


Takashi


-------------------------------------------------------
SF.Net is sponsored by: Speed Start Your Linux Apps Now.
Build and deploy apps & Web services for Linux with
a free DVD software kit from IBM. Click Now!
http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click

Re: Tascam US-224 support

[Martin Langer]

On Tue, Feb 17, 2004 at 04:34:34PM +0100, Takashi Iwai wrote:
> At Mon, 16 Feb 2004 22:23:52 +0100,
> Martin Langer wrote:
> > 
> > I vote for applying both Tascam US-224 patches:
> > 
> > http://www.mail-archive.com/alsa-devel@lists.sourceforge.net/msg11281.html
> > http://www.mail-archive.com/alsa-devel@lists.sourceforge.net/msg11311.html
> 
> thanks, now it's on cvs.

alsa-firmware/usx2yloader/usx2y.prepad can be removed now. (That file is 
replaced by us224.prepad and us122.prepad)

> even the usx2y rule would be broken if tascam releases us438 or so...

They should ask us before releasing it :)

martin

-- 


-------------------------------------------------------
SF.Net is sponsored by: Speed Start Your Linux Apps Now.
Build and deploy apps & Web services for Linux with
a free DVD software kit from IBM. Click Now!
http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click

Re: Tascam US-224 support

[Takashi Iwai]

At Tue, 17 Feb 2004 22:41:33 +0100,
Martin Langer wrote:
> 
> On Tue, Feb 17, 2004 at 04:34:34PM +0100, Takashi Iwai wrote:
> > At Mon, 16 Feb 2004 22:23:52 +0100,
> > Martin Langer wrote:
> > > 
> > > I vote for applying both Tascam US-224 patches:
> > > 
> > > http://www.mail-archive.com/alsa-devel@lists.sourceforge.net/msg11281.html
> > > http://www.mail-archive.com/alsa-devel@lists.sourceforge.net/msg11311.html
> > 
> > thanks, now it's on cvs.
> 
> alsa-firmware/usx2yloader/usx2y.prepad can be removed now. (That file is 
> replaced by us224.prepad and us122.prepad)

ok, done.


Takashi


-------------------------------------------------------
SF.Net is sponsored by: Speed Start Your Linux Apps Now.
Build and deploy apps & Web services for Linux with
a free DVD software kit from IBM. Click Now!
http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click

Start us224control via hotplug. was: Re: Tascam US-224 support

[Karsten Wiese]

this is a patch against /alsa-tools/usx2yloader/tascam_fpga.in:

>>>>>>
Index: tascam_fpga.in
===================================================================
RCS file: /cvsroot/alsa/alsa-tools/usx2yloader/tascam_fpga.in,v
retrieving revision 1.4
diff -u -r1.4 tascam_fpga.in
--- tascam_fpga.in	19 Jan 2004 18:49:21 -0000	1.4
+++ tascam_fpga.in	19 Feb 2004 22:16:04 -0000
@@ -23,6 +23,9 @@
 1604/8001/*)
 	CONTROLLER=@bindir@/us428control
 	;;
+1604/8005/*)
+	CONTROLLER=@bindir@/us224control
+	;;
 *)
 	;;
 esac
<<<<<<

unfortunately this patch is only half of what it should be:
"us224control" is meant to be created from "ln -s us428control us224control"
how would we integrate this "ln -s us428control us224control" into Makefile.am 
? or should we just cp the symbolic link? but then: can you put the symbolic 
link created by "ln -s us428control us224control" into CVS?

if nobody knows, here is what works out of the box:

>>>>>>
Index: tascam_fpga.in
===================================================================
RCS file: /cvsroot/alsa/alsa-tools/usx2yloader/tascam_fpga.in,v
retrieving revision 1.4
diff -u -r1.4 tascam_fpga.in
--- tascam_fpga.in	19 Jan 2004 18:49:21 -0000	1.4
+++ tascam_fpga.in	19 Feb 2004 22:16:04 -0000
@@ -23,6 +23,9 @@
 1604/8001/*)
 	CONTROLLER=@bindir@/us428control
 	;;
+1604/8005/*)
+	CONTROLLER=@bindir@/us428control
+	;;
 *)
 	;;
 esac
<<<<<<

best regards, Karsten



-------------------------------------------------------
SF.Net is sponsored by: Speed Start Your Linux Apps Now.
Build and deploy apps & Web services for Linux with
a free DVD software kit from IBM. Click Now!
http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click

Re: Start us224control via hotplug. was: Re: Tascam US-224 support

[Takashi Iwai]

At Fri, 20 Feb 2004 00:40:32 +0100,
Karsten Wiese wrote:
> 
> this is a patch against /alsa-tools/usx2yloader/tascam_fpga.in:
> 
> >>>>>>
> Index: tascam_fpga.in
> ===================================================================
> RCS file: /cvsroot/alsa/alsa-tools/usx2yloader/tascam_fpga.in,v
> retrieving revision 1.4
> diff -u -r1.4 tascam_fpga.in
> --- tascam_fpga.in	19 Jan 2004 18:49:21 -0000	1.4
> +++ tascam_fpga.in	19 Feb 2004 22:16:04 -0000
> @@ -23,6 +23,9 @@
>  1604/8001/*)
>  	CONTROLLER=@bindir@/us428control
>  	;;
> +1604/8005/*)
> +	CONTROLLER=@bindir@/us224control
> +	;;
>  *)
>  	;;
>  esac
> <<<<<<
> 
> unfortunately this patch is only half of what it should be:
> "us224control" is meant to be created from "ln -s us428control us224control"

is it necessary for performance except for the sane naming?
for example, in the case of aplay/arecord, both of them are the same
binary but perform differently according to the executed name.
if it's not the case, i'd like to keep the same name.

> how would we integrate this "ln -s us428control us224control" into Makefile.am 
> ? or should we just cp the symbolic link? but then: can you put the symbolic 
> link created by "ln -s us428control us224control" into CVS?
> 
> if nobody knows, here is what works out of the box:
> 
> >>>>>>
> Index: tascam_fpga.in
> ===================================================================
> RCS file: /cvsroot/alsa/alsa-tools/usx2yloader/tascam_fpga.in,v
> retrieving revision 1.4
> diff -u -r1.4 tascam_fpga.in
> --- tascam_fpga.in	19 Jan 2004 18:49:21 -0000	1.4
> +++ tascam_fpga.in	19 Feb 2004 22:16:04 -0000
> @@ -23,6 +23,9 @@
>  1604/8001/*)
>  	CONTROLLER=@bindir@/us428control
>  	;;
> +1604/8005/*)
> +	CONTROLLER=@bindir@/us428control
> +	;;
>  *)
>  	;;
>  esac

that's fine.


Takashi


-------------------------------------------------------
SF.Net is sponsored by: Speed Start Your Linux Apps Now.
Build and deploy apps & Web services for Linux with
a free DVD software kit from IBM. Click Now!
http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click

Re: Start us224control via hotplug. was: Re: Tascam US-224 support

[Karsten Wiese]

Am Freitag, 20. Februar 2004 11:50 schrieb Takashi Iwai:
> At Fri, 20 Feb 2004 00:40:32 +0100,
>
> Karsten Wiese wrote:
> > this is a patch against /alsa-tools/usx2yloader/tascam_fpga.in:
> >
> >
> > Index: tascam_fpga.in
> > ===================================================================
> > RCS file: /cvsroot/alsa/alsa-tools/usx2yloader/tascam_fpga.in,v
> > retrieving revision 1.4
> > diff -u -r1.4 tascam_fpga.in
> > --- tascam_fpga.in	19 Jan 2004 18:49:21 -0000	1.4
> > +++ tascam_fpga.in	19 Feb 2004 22:16:04 -0000
> > @@ -23,6 +23,9 @@
> >  1604/8001/*)
> >  	CONTROLLER=@bindir@/us428control
> >  	;;
> > +1604/8005/*)
> > +	CONTROLLER=@bindir@/us224control
> > +	;;
> >  *)
> >  	;;
> >  esac
> > <<<<<<
> >
> > unfortunately this patch is only half of what it should be:
> > "us224control" is meant to be created from "ln -s us428control
> > us224control"
>
> is it necessary for performance except for the sane naming?
> for example, in the case of aplay/arecord, both of them are the same
> binary but perform differently according to the executed name.
> if it's not the case, i'd like to keep the same name.
sane naming only so far.

>
> > how would we integrate this "ln -s us428control us224control" into
> > Makefile.am ? or should we just cp the symbolic link? but then: can you
> > put the symbolic link created by "ln -s us428control us224control" into
> > CVS?
> >
> > if nobody knows, here is what works out of the box:
> >
> >
> > Index: tascam_fpga.in
> > ===================================================================
> > RCS file: /cvsroot/alsa/alsa-tools/usx2yloader/tascam_fpga.in,v
> > retrieving revision 1.4
> > diff -u -r1.4 tascam_fpga.in
> > --- tascam_fpga.in	19 Jan 2004 18:49:21 -0000	1.4
> > +++ tascam_fpga.in	19 Feb 2004 22:16:04 -0000
> > @@ -23,6 +23,9 @@
> >  1604/8001/*)
> >  	CONTROLLER=@bindir@/us428control
> >  	;;
> > +1604/8005/*)
> > +	CONTROLLER=@bindir@/us428control
> > +	;;
> >  *)
> >  	;;
> >  esac
>
> that's fine.

please commit the 'fine' version:

>>>>>>
Index: tascam_fpga.in
===================================================================
RCS file: /cvsroot/alsa/alsa-tools/usx2yloader/tascam_fpga.in,v
retrieving revision 1.4
diff -u -r1.4 tascam_fpga.in
--- tascam_fpga.in	19 Jan 2004 18:49:21 -0000	1.4
+++ tascam_fpga.in	19 Feb 2004 22:16:04 -0000
@@ -23,6 +23,9 @@
 1604/8001/*)
 	CONTROLLER=@bindir@/us428control
 	;;
+1604/8005/*)
+	CONTROLLER=@bindir@/us428control
+	;;
 *)
 	;;
 esac
<<<<<<

thanks,
Karsten


-------------------------------------------------------
SF.Net is sponsored by: Speed Start Your Linux Apps Now.
Build and deploy apps & Web services for Linux with
a free DVD software kit from IBM. Click Now!
http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click