[PATCH]usbus428 0.1 against alsa-driver-0.9.6

[PATCH]usbus428 0.1 against alsa-driver-0.9.6

[Karsten Wiese]

[-- Attachment #1: Type: text/plain, Size: 475 bytes --]

Hi,

this uses hwdep 2 fold: 
a) second stage firmware download
b) interface for us428control - aplication

no alsa-mixer interface yet, sorry.
but: with us428control you can use the us428's sliders to set direct 
monitoring levels and pcm-out level.

I chose to integrate a userspace tool, so further needed steps for the us428's 
knobs & sliders can be done in userspace until all is sorted out.

see us428control & usX2Yloader in the following e-mails.

have fun,
Karsten

[-- Attachment #2: alsa-driver-0.9.6+usbus428_0.1.diff.bz2 --]
[-- Type: application/x-bzip2, Size: 17266 bytes --]

Re: [PATCH]usbus428 0.1 against alsa-driver-0.9.6

[Takashi Iwai]

At Sat, 6 Sep 2003 16:36:50 +0200,
Karsten Wiese wrote:
> 
> [1  <text/plain; us-ascii (7bit)>]
> Hi,
> 
> this uses hwdep 2 fold: 
> a) second stage firmware download
> b) interface for us428control - aplication
> 
> no alsa-mixer interface yet, sorry.
> but: with us428control you can use the us428's sliders to set direct 
> monitoring levels and pcm-out level.
> 
> I chose to integrate a userspace tool, so further needed steps for the us428's 
> knobs & sliders can be done in userspace until all is sorted out.
> 
> see us428control & usX2Yloader in the following e-mails.

thanks for the patch.
now i commited it to cvs tree.

i put us428 stuffs into alsa-driver/usb/us428 subtree to avoid
spreading over a directory.

also, usx2y.h is put alsa-driver/usb/us428, too.  if it's necessarily
exported, we can put it to alsa-kernel/include, later.

the compilation seems ok.  please check the cvs tree later.


Takashi


-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf