From: sashiko-bot@kernel.org
To: "Yosry Ahmed" <yosry@kernel.org>
Cc: kvm@vger.kernel.org
Subject: Re: [PATCH v2 26/29] KVM: nSVM: Flush L2's ASID when emulating INVLPGA
Date: Thu, 08 Oct 2026 00:45:53 +0000 [thread overview]
Message-ID: <sashiko-outbox-163479@kernel.org> (raw)
In-Reply-To: <20261008001425.2458927-27-yosry@kernel.org>
Thank you for your contribution! Sashiko AI review found 1 potential issue(s) to consider:
- [High] mm: host BUG_ON in shadow_walk_init_using_root on nested INVLPGA
--
commit 37c7f867aa6cefc5df5eab301ccc6b7b444c6816
Author: Yosry Ahmed <yosry@kernel.org>
Subject: KVM: nSVM: Flush L2's ASID when emulating INVLPGA
This commit handles INVLPGA differently depending on whether L1 is flushing
its own ASID or a different L2 ASID. If it's a different ASID, the GVA flush is
skipped for the current context, and the L2 ASID is flushed in hardware or
via VMCB fallback.
> diff --git a/arch/x86/kvm/svm/svm.c b/arch/x86/kvm/svm/svm.c
> index f37cba4f34c2b..4b95a05c37f60 100644
> --- a/arch/x86/kvm/svm/svm.c
> +++ b/arch/x86/kvm/svm/svm.c
> @@ -2468,17 +2468,51 @@ static int clgi_interception(struct kvm_vcpu *vcpu)
>
[ ... ]
> static int invlpga_interception(struct kvm_vcpu *vcpu)
> {
> + struct vcpu_svm *svm = to_svm(vcpu);
> /* FIXME: Handle an address size prefix. */
> gva_t gva = kvm_rax_read(vcpu);
> u32 asid = kvm_ecx_read(vcpu);
> + int cpu;
>
> if (nested_svm_check_permissions(vcpu))
> return 1;
>
> trace_kvm_invlpga(to_svm(vcpu)->vmcb->save.rip, asid, gva);
>
> - /* Let's treat INVLPGA the same as INVLPG (can be optimized!) */
> - kvm_mmu_invlpg(vcpu, gva);
> + /*
> + * INVLPG on a non-canonical address is a NOP according to the SDM,
> + * assume the same behavior from INVLPGA since the APM doesn't specify.
> + */
> + if (is_noncanonical_invlpg_address(gva, vcpu))
> + return kvm_skip_emulated_instruction(vcpu);
> +
> + /*
> + * Do nothing if L1 is flushing a different L2 ASID than the one KVM is
> + * currently tracking. KVM tracks a single L2 ASID, and performs a TLB
> + * flush (and MMU resync if needed) when L1 switches ASIDs anyway.
> + */
> + if (asid && asid != svm->nested.last_asid)
> + return kvm_skip_emulated_instruction(vcpu);
> +
> + /*
> + * Handle INVLPGA similar to INVLPG, with one caveat. If the specified
> + * ASID is non-zero (i.e. L1 is not flushing its own ASID), skip
> + * flushing the TLB for the current context (L1's), and use INVLPGA to
> + * flush L2's ASID in hardware if running on the same CPU (otherwise
> + * fallback to a full ASID flush).
> + *
> + * Note, if NPT is disabled, this will sync all the shadow page tables.
> + * This can be optimized by keying off guest_mode.
> + */
> + __kvm_mmu_invlpg(vcpu, gva, !asid);
[Severity: High]
Does this code trigger a host kernel panic when a 64-bit L1 guest switches to
a 32-bit PAE L2 guest?
When KVM uses shadow paging (e.g. nested NPT disabled), L1 and L2 share the
same MMU context (vcpu->arch.root_mmu). If a 64-bit L1 guest switches to a
32-bit PAE L2 guest, KVM's fast_pgd_switch() will cache the old 64-bit root in
vcpu->arch.mmu->prev_roots.
If L2 then executes INVLPGA, or L1 intercepts it and KVM emulates it, we call
into __kvm_mmu_invlpg():
arch/x86/kvm/mmu/mmu.c:__kvm_mmu_invlpg() {
...
__kvm_mmu_invalidate_addr(vcpu, &vcpu->arch.gva_walk, gva,
KVM_MMU_ROOTS_ALL, flush_gva);
}
Which blindly iterates over all prev_roots:
arch/x86/kvm/mmu/mmu.c:__kvm_mmu_invalidate_addr() {
...
for (i = 0; i < KVM_MMU_NUM_PREV_ROOTS; i++) {
if (roots & KVM_MMU_ROOT_PREVIOUS(i))
kvm_mmu_sync_addr(vcpu, mmu, addr, mmu->prev_roots[i].hpa);
}
}
kvm_mmu_sync_addr() then calls shadow_walk_init_using_root() via
for_each_shadow_entry_using_root(). Because the active MMU role is PAE,
iterator->level evaluates to PT32E_ROOT_LEVEL (3), which hits a hardcoded
assertion:
arch/x86/kvm/mmu/mmu.c:shadow_walk_init_using_root() {
...
if (iterator->level == PT32E_ROOT_LEVEL) {
/*
* prev_root is currently only used for 64-bit hosts. So only
* the active root_hpa is valid here.
*/
BUG_ON(root != vcpu->arch.mmu->root.hpa);
...
}
Because the 64-bit root from prev_roots does not match the currently active PAE
root, it appears this will panic the host, resulting in a Denial of Service
directly triggerable by a nested guest.
> + if (asid) {
> + cpu = get_cpu();
> + if (cpu == svm->nested.vmcb02.cpu)
> + invlpga(gva, svm->nested.asid02);
> + else
> + vmcb_set_flush_asid(svm->nested.vmcb02.ptr);
> + put_cpu();
> + }
>
> return kvm_skip_emulated_instruction(vcpu);
> }
--
Sashiko AI review · https://sashiko.dev/#/patchset/20261008001425.2458927-1-yosry@kernel.org?part=26
next prev parent reply other threads:[~2026-10-08 0:45 UTC|newest]
Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-08 0:13 [PATCH v2 00/29] KVM: nSVM: Optimize nSVM TLB flushes Yosry Ahmed
2026-10-08 0:13 ` [PATCH v2 01/29] KVM: nSVM: Flush the TLB after forcefully leaving nested Yosry Ahmed
2026-10-08 0:13 ` [PATCH v2 02/29] KVM: SVM: Document number of ASIDs CPUID setting Yosry Ahmed
2026-10-08 0:13 ` [PATCH v2 03/29] KVM: VMX: Generalize VPID allocation to be vendor-neutral Yosry Ahmed
2026-10-08 0:30 ` sashiko-bot
2026-10-08 0:14 ` [PATCH v2 04/29] KVM: x86/mmu: Support specifying reserved TLB tags Yosry Ahmed
2026-10-08 0:14 ` [PATCH v2 05/29] KVM: SVM: Add helpers to set/clear ASID flush in VMCB Yosry Ahmed
2026-10-08 0:14 ` [PATCH v2 06/29] KVM: SVM: Fallback to flush everything if FLUSHBYASID is not available Yosry Ahmed
2026-10-08 0:14 ` [PATCH v2 07/29] KVM: SEV: Do ASID initialization at VMCB initialization Yosry Ahmed
2026-10-08 0:14 ` [PATCH v2 08/29] KVM: SEV: Expose sev_get_asid() outside of sev.c Yosry Ahmed
2026-10-08 0:14 ` [PATCH v2 09/29] KVM: SEV: Explicitly initialize the per vCPU ASID on SEV VM migration Yosry Ahmed
2026-10-08 0:14 ` [PATCH v2 10/29] KVM: SVM: Use a static ASID per vCPU Yosry Ahmed
2026-10-08 0:30 ` sashiko-bot
2026-10-08 0:14 ` [PATCH v2 11/29] KVM: SVM: Only flush the fallback ASID when used by a different vCPU Yosry Ahmed
2026-10-08 0:33 ` sashiko-bot
2026-10-08 0:14 ` [PATCH v2 12/29] KVM: nSVM: Drop svm->nested.initialized Yosry Ahmed
2026-10-08 0:14 ` [PATCH v2 13/29] KVM: nSVM: Add a placeholder ASID for L2 Yosry Ahmed
2026-10-08 0:42 ` sashiko-bot
2026-10-08 0:14 ` [PATCH v2 14/29] KVM: x86: hyper-v: Rename kvm_hv_vcpu_purge_flush_tlb() Yosry Ahmed
2026-10-08 0:14 ` [PATCH v2 15/29] KVM: x86: hyper-v: Allow purging all TLB flush FIFOs Yosry Ahmed
2026-10-08 0:14 ` [PATCH v2 16/29] KVM: nSVM: Flush both L1 and L2 ASIDs on KVM_REQ_TLB_FLUSH Yosry Ahmed
2026-10-08 0:14 ` [PATCH v2 17/29] KVM: nSVM: Always switch VMCB before leaving guest mode Yosry Ahmed
2026-10-08 0:14 ` [PATCH v2 18/29] KVM: nSVM: Split nested_svm_transition_tlb_flush() into entry/exit fns Yosry Ahmed
2026-10-08 0:14 ` [PATCH v2 19/29] KVM: nSVM: Service local TLB flushes before nested transitions Yosry Ahmed
2026-10-08 0:14 ` [PATCH v2 20/29] KVM: x86: Add KVM_REQ_MMU_SYNC_ALL_ROOTS Yosry Ahmed
2026-10-08 3:29 ` Lai Jiangshan
2026-10-08 0:14 ` [PATCH v2 21/29] KVM: nSVM: Handle nested TLB flush requests through TLB_CONTROL Yosry Ahmed
2026-10-08 0:36 ` sashiko-bot
2026-10-08 0:14 ` [PATCH v2 22/29] KVM: nSVM: Flush the TLB if L1 changes L2's ASID in vmcb12 Yosry Ahmed
2026-10-08 0:14 ` [PATCH v2 23/29] KVM: nSVM: Do not reset TLB_CONTROL in vmcb02 on nested VM-Enter Yosry Ahmed
2026-10-08 0:14 ` [PATCH v2 24/29] KVM: x86/mmu: Rename __kvm_mmu_invalidate_addr() to kvm_mmu_sync_addr() Yosry Ahmed
2026-10-08 0:14 ` [PATCH v2 25/29] KVM: x86/mmu: Refactor kvm_mmu_invlpg() to allow skipping the GVA flush Yosry Ahmed
2026-10-08 0:14 ` [PATCH v2 26/29] KVM: nSVM: Flush L2's ASID when emulating INVLPGA Yosry Ahmed
2026-10-08 0:45 ` sashiko-bot [this message]
2026-10-08 0:14 ` [PATCH v2 27/29] KVM: nSVM: Flush the ASID on nested transitions if shared by L1 and L2 Yosry Ahmed
2026-10-08 0:14 ` [PATCH v2 28/29] KVM: nSVM: Use different ASIDs for " Yosry Ahmed
2026-10-08 0:14 ` [PATCH v2 29/29] KVM: selftests: Add a test for nested TLB flushes Yosry Ahmed
2026-10-08 0:35 ` sashiko-bot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=sashiko-outbox-163479@kernel.org \
--to=sashiko-bot@kernel.org \
--cc=kvm@vger.kernel.org \
--cc=sashiko-reviews@lists.linux.dev \
--cc=yosry@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.