From: sashiko-bot@kernel.org
To: "Chih Kai Hsu" <hsu.chih.kai@realtek.com>
Cc: linux-usb@vger.kernel.org
Subject: Re: [PATCH net-next v6 03/10] r8152: split RTL_VER_17 into QFN68 and QFN100 package variants
Date: Fri, 09 Oct 2026 08:17:22 +0000 [thread overview]
Message-ID: <sashiko-outbox-165067@kernel.org> (raw)
In-Reply-To: <20261008081556.47901-4-nic_swsd@realtek.com>
> RTL8159 is sold in QFN68 and QFN100 packages, and only QFN68 needs
> the u2phy backup-restore patch and enables UPS (in a later patch).
> There was previously no way to tell the two apart at runtime, since
> both used the same RTL_VER_17.
>
> Split RTL_VER_17 into RTL_VER_17_QFN68 and RTL_VER_17_QFN100 and
> update every switch/case on RTL_VER_17 in the driver to handle both.
> Detect the package by reading the new PLA_PKG_DET register
> (0xdc48, masked with PKG_MASK = 0x1e) via a new __rtl_get_pkg_det()
> helper, called from __rtl_get_hw_ver() when the chip ID is 0x2020:
> pkg_det value 0x1e/0x1c selects QFN68, 0x18/0x1a selects QFN100, and
> any other value logs "Unknown package" and falls back to
> RTL_VER_UNKNOWN.
>
> r8159_init() gains a QFN68-only write ("Enable u2phy backup restore
> patch", 0xb99c BIT(0)) that does not apply to QFN100.
>
> Signed-off-by: Chih Kai Hsu <hsu.chih.kai@realtek.com>
Sashiko has reviewed this patch and found no issues. It looks great!
--
Sashiko AI review · https://sashiko.dev/#/patchset/20261008081556.47901-1-nic_swsd@realtek.com?part=3
next prev parent reply other threads:[~2026-10-09 8:17 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-10-08 8:15 [PATCH net-next v6 0/10] r8152: refactor and extend RTL8157/8159 support Chih Kai Hsu
2026-10-08 8:15 ` [PATCH net-next v6 01/10] r8152: split r8156_init per chip and factor out wait_autoload_done Chih Kai Hsu
2026-10-08 12:17 ` Birger Koblitz
2026-10-12 7:16 ` Chih Kai Hsu
2026-10-12 9:24 ` Chih Kai Hsu
2026-10-12 10:01 ` Birger Koblitz
2026-10-09 8:17 ` sashiko-bot
2026-10-12 9:06 ` netdev-bot+sashiko
2026-10-08 8:15 ` [PATCH net-next v6 02/10] r8152: add new init writes for RTL8156B/8157/8159 Chih Kai Hsu
2026-10-09 8:17 ` sashiko-bot
2026-10-12 9:06 ` netdev-bot+sashiko
2026-10-08 8:15 ` [PATCH net-next v6 03/10] r8152: split RTL_VER_17 into QFN68 and QFN100 package variants Chih Kai Hsu
2026-10-09 8:17 ` sashiko-bot [this message]
2026-10-12 9:06 ` netdev-bot+sashiko
2026-10-08 8:15 ` [PATCH net-next v6 04/10] r8152: split rtl8156_enable/up/down into per-chip-family functions Chih Kai Hsu
2026-10-09 8:17 ` sashiko-bot
2026-10-08 8:15 ` [PATCH net-next v6 05/10] r8152: fix up and down register settings for RTL8156/8156B/8157/8159 Chih Kai Hsu
2026-10-09 8:17 ` sashiko-bot
2026-10-08 8:15 ` [PATCH net-next v6 06/10] r8152: split r8157_hw_phy_cfg into RTL8157 and RTL8159 variants Chih Kai Hsu
2026-10-09 8:17 ` sashiko-bot
2026-10-08 8:15 ` [PATCH net-next v6 07/10] r8152: add rtl8157_unload and rtl8157_change_mtu Chih Kai Hsu
2026-10-09 8:17 ` sashiko-bot
2026-10-12 9:06 ` netdev-bot+sashiko
2026-10-08 8:15 ` [PATCH net-next v6 08/10] r8152: add TGPHY register access for RTL8157 and RTL8159 Chih Kai Hsu
2026-10-09 8:17 ` sashiko-bot
2026-10-12 9:06 ` netdev-bot+sashiko
2026-10-08 8:15 ` [PATCH net-next v6 09/10] r8152: extract rtl_fc_pause_pkt_en() and apply it to RTL8156/8157/8159 Chih Kai Hsu
2026-10-09 8:17 ` sashiko-bot
2026-10-12 9:06 ` netdev-bot+sashiko
2026-10-08 8:15 ` [PATCH net-next v6 10/10] r8152: enable UPS for RTL8157 and RTL8159 QFN68 Chih Kai Hsu
2026-10-09 8:17 ` sashiko-bot
2026-10-12 9:06 ` netdev-bot+sashiko
2026-10-08 8:19 ` [PATCH net-next v6 0/10] r8152: refactor and extend RTL8157/8159 support netdev-bot+sinfo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=sashiko-outbox-165067@kernel.org \
--to=sashiko-bot@kernel.org \
--cc=hsu.chih.kai@realtek.com \
--cc=linux-usb@vger.kernel.org \
--cc=sashiko-reviews@lists.linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.