All of lore.kernel.org
 help / color / mirror / Atom feed
From: sashiko-bot@kernel.org
To: "Chih Kai Hsu" <hsu.chih.kai@realtek.com>
Cc: linux-usb@vger.kernel.org
Subject: Re: [PATCH net-next v6 09/10] r8152: extract rtl_fc_pause_pkt_en() and apply it to RTL8156/8157/8159
Date: Fri, 09 Oct 2026 08:17:23 +0000	[thread overview]
Message-ID: <sashiko-outbox-165069@kernel.org> (raw)
In-Reply-To: <20261008081556.47901-10-nic_swsd@realtek.com>

> The flow-control configuration keeps the device from sending pause
> frames without limit. Only RTL8156B (VER_12/13/15) got the full
> sequence from r8156b_init(). RTL8156A (VER_10/11) toggled
> FC_PATCH_TASK in rtl8156_enable() without the FC timer and
> FLOW_CTRL_PATCH_OPT setup that has to precede it, and RTL8157/RTL8159
> (VER_16/17) got no flow-control configuration at all, so they could
> keep sending pause frames indefinitely.
> 
> Collect the per-family sequence into rtl_fc_pause_pkt_en() and call
> it for all of them.
> 
> - VER_10/11: the FC timer + FLOW_CTRL_PATCH_OPT sequence that
>   RTL8153B (VER_09) already runs from its pre_fw/post_fw hooks,
>   applied directly instead.
> 
> [ ... ]
> 
> Fixes: 195aae321c82 ("r8152: support new chips")
> Fixes: fd3c7d080df5 ("r8152: Add support for the RTL8157 hardware")
> Fixes: ad2a55b63b41 ("r8152: Add support for the RTL8159 chip")
> Signed-off-by: Chih Kai Hsu <hsu.chih.kai@realtek.com>

Sashiko has reviewed this patch and found no issues. It looks great!

-- 
Sashiko AI review · https://sashiko.dev/#/patchset/20261008081556.47901-1-nic_swsd@realtek.com?part=9


  reply	other threads:[~2026-10-09  8:17 UTC|newest]

Thread overview: 33+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-10-08  8:15 [PATCH net-next v6 0/10] r8152: refactor and extend RTL8157/8159 support Chih Kai Hsu
2026-10-08  8:15 ` [PATCH net-next v6 01/10] r8152: split r8156_init per chip and factor out wait_autoload_done Chih Kai Hsu
2026-10-08 12:17   ` Birger Koblitz
2026-10-12  7:16     ` Chih Kai Hsu
2026-10-12  9:24     ` Chih Kai Hsu
2026-10-12 10:01       ` Birger Koblitz
2026-10-09  8:17   ` sashiko-bot
2026-10-12  9:06   ` netdev-bot+sashiko
2026-10-08  8:15 ` [PATCH net-next v6 02/10] r8152: add new init writes for RTL8156B/8157/8159 Chih Kai Hsu
2026-10-09  8:17   ` sashiko-bot
2026-10-12  9:06   ` netdev-bot+sashiko
2026-10-08  8:15 ` [PATCH net-next v6 03/10] r8152: split RTL_VER_17 into QFN68 and QFN100 package variants Chih Kai Hsu
2026-10-09  8:17   ` sashiko-bot
2026-10-12  9:06   ` netdev-bot+sashiko
2026-10-08  8:15 ` [PATCH net-next v6 04/10] r8152: split rtl8156_enable/up/down into per-chip-family functions Chih Kai Hsu
2026-10-09  8:17   ` sashiko-bot
2026-10-08  8:15 ` [PATCH net-next v6 05/10] r8152: fix up and down register settings for RTL8156/8156B/8157/8159 Chih Kai Hsu
2026-10-09  8:17   ` sashiko-bot
2026-10-08  8:15 ` [PATCH net-next v6 06/10] r8152: split r8157_hw_phy_cfg into RTL8157 and RTL8159 variants Chih Kai Hsu
2026-10-09  8:17   ` sashiko-bot
2026-10-08  8:15 ` [PATCH net-next v6 07/10] r8152: add rtl8157_unload and rtl8157_change_mtu Chih Kai Hsu
2026-10-09  8:17   ` sashiko-bot
2026-10-12  9:06   ` netdev-bot+sashiko
2026-10-08  8:15 ` [PATCH net-next v6 08/10] r8152: add TGPHY register access for RTL8157 and RTL8159 Chih Kai Hsu
2026-10-09  8:17   ` sashiko-bot
2026-10-12  9:06   ` netdev-bot+sashiko
2026-10-08  8:15 ` [PATCH net-next v6 09/10] r8152: extract rtl_fc_pause_pkt_en() and apply it to RTL8156/8157/8159 Chih Kai Hsu
2026-10-09  8:17   ` sashiko-bot [this message]
2026-10-12  9:06   ` netdev-bot+sashiko
2026-10-08  8:15 ` [PATCH net-next v6 10/10] r8152: enable UPS for RTL8157 and RTL8159 QFN68 Chih Kai Hsu
2026-10-09  8:17   ` sashiko-bot
2026-10-12  9:06   ` netdev-bot+sashiko
2026-10-08  8:19 ` [PATCH net-next v6 0/10] r8152: refactor and extend RTL8157/8159 support netdev-bot+sinfo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=sashiko-outbox-165069@kernel.org \
    --to=sashiko-bot@kernel.org \
    --cc=hsu.chih.kai@realtek.com \
    --cc=linux-usb@vger.kernel.org \
    --cc=sashiko-reviews@lists.linux.dev \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.