From: sashiko-bot@kernel.org
To: "Vijendar Mukunda" <Vijendar.Mukunda@amd.com>
Cc: linux-sound@vger.kernel.org
Subject: Re: [PATCH v5 16/25] soundwire: amd: pm_runtime guard in remove path
Date: Sat, 07 Nov 2026 16:10:28 +0000 [thread overview]
Message-ID: <sashiko-outbox-203025@kernel.org> (raw)
In-Reply-To: <20261107154659.3358223-17-Vijendar.Mukunda@amd.com>
Thank you for your contribution! Sashiko AI review found 1 potential
issue to consider:
- [Low] soundwire: amd: inaccurate Fixes tag in commit message for
pm_runtime guard
--
commit 258769b3a1bdd79fbca74cfbf250109e984888bf
Author: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
> soundwire: amd: pm_runtime guard in remove path
>
> Guard pm_runtime_disable() so it is only called when runtime PM
> was actually enabled. amd_sdw_manager_start() calls pm_runtime_enable()
> only at the very end, after several fallible hardware init steps. If
> sdw_amd_startup() fails mid-loop (one manager started, the next fails
> before pm_runtime_enable()), sdw_amd_exit() triggers
> platform_device_unregister() for all managers. Calling
> pm_runtime_disable() on the partially-started manager finds
> disable_depth already at its initial value of 1, silently increments it
> to 2 and returns without a warning, so a later pm_runtime_enable() would
> only bring it back to 1 and leave runtime PM disabled. Use
> pm_runtime_enabled() to skip the call when it was never paired with an
> enable.
>
> Fixes: f93b697ed98e ("soundwire: amd: cancel pending slave status handling workqueue during remove sequence")
> Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
[Severity: Low]
Is the Fixes tag pointing to the right commit?
Commit f93b697ed98e ("soundwire: amd: cancel pending slave status handling
workqueue during remove sequence") only added cancel_work_sync() to
amd_sdw_manager_remove(). The unconditional pm_runtime_disable() in
amd_sdw_manager_remove() was introduced in 81ff58ff71ad ("soundwire: amd: add
runtime pm ops for AMD SoundWire manager driver"), and the synchronous
sdw_amd_startup() / amd_sdw_manager_start() sequence described here was added
in ed5e8741b8db ("soundwire: amd: refactor amd soundwire manager device node
creation").
--
Sashiko AI review · https://sashiko.dev/#/patchset/20261107154659.3358223-1-Vijendar.Mukunda@amd.com?part=16
next prev parent reply other threads:[~2026-11-07 16:10 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-11-07 15:45 [PATCH v5 00/25] soundwire: amd: SoundWire manager driver bug fixes Vijendar Mukunda
2026-11-07 15:45 ` [PATCH v5 01/25] soundwire: amd: consolidate pad register macros into amd_init.h Vijendar Mukunda
2026-11-07 15:45 ` [PATCH v5 02/25] soundwire: amd: program pad SCHMEN and OE control for ACP 7.0/7.1/7.2 Vijendar Mukunda
2026-11-07 16:13 ` sashiko-bot
2026-11-07 19:00 ` Mukunda,Vijendar
2026-11-07 15:45 ` [PATCH v5 03/25] soundwire: amd: add pad ctrl helpers for D0/D3 PM transitions Vijendar Mukunda
2026-11-07 15:45 ` [PATCH v5 04/25] soundwire: amd: track full pad teardown across suspend/resume Vijendar Mukunda
2026-11-07 15:45 ` [PATCH v5 05/25] soundwire: amd: fix missing wake interrupt and group wake-arming calls in runtime suspend Vijendar Mukunda
2026-11-07 16:04 ` sashiko-bot
2026-11-07 15:45 ` [PATCH v5 06/25] soundwire: amd: fix IRQ thread dropping STATUS_0TO7 on simultaneous wake Vijendar Mukunda
2026-11-07 15:45 ` [PATCH v5 07/25] soundwire: amd: remove STATUS_8TO11 clear from amd_sdw_process_wake_event() Vijendar Mukunda
2026-11-07 15:45 ` [PATCH v5 08/25] soundwire: amd: fix missing wake interrupt for ACP6.3 in POWER_OFF suspend Vijendar Mukunda
2026-11-07 16:02 ` sashiko-bot
2026-11-07 15:45 ` [PATCH v5 09/25] soundwire: amd: fix SDW command timeout return value handling Vijendar Mukunda
2026-11-07 15:45 ` [PATCH v5 10/25] soundwire: amd: return response on IMM status cleanup timeout Vijendar Mukunda
2026-11-07 16:04 ` sashiko-bot
2026-11-07 15:45 ` [PATCH v5 11/25] soundwire: amd: clarify bad-state guard poll omission in IMM_RES_VALID path Vijendar Mukunda
2026-11-07 15:45 ` [PATCH v5 12/25] soundwire: amd: cache ping slave status to avoid spurious disconnect on timeout Vijendar Mukunda
2026-11-07 15:45 ` [PATCH v5 13/25] soundwire: amd: assert msg_lock is held in amd_sdw_read_ping_status() Vijendar Mukunda
2026-11-07 15:45 ` [PATCH v5 14/25] soundwire: amd: fix work drain ordering in remove path Vijendar Mukunda
2026-11-07 16:14 ` sashiko-bot
2026-11-07 19:07 ` Mukunda,Vijendar
2026-11-07 15:45 ` [PATCH v5 15/25] soundwire: amd: defer dev_set_drvdata() until after INIT_WORK() Vijendar Mukunda
2026-11-07 15:45 ` [PATCH v5 16/25] soundwire: amd: pm_runtime guard in remove path Vijendar Mukunda
2026-11-07 16:10 ` sashiko-bot [this message]
2026-11-07 15:45 ` [PATCH v5 17/25] soundwire: amd: use interrupt_enabled flag to guard IRQ work scheduling Vijendar Mukunda
2026-11-07 16:21 ` sashiko-bot
2026-11-07 20:29 ` Mukunda,Vijendar
2026-11-07 15:45 ` [PATCH v5 18/25] soundwire: amd: delay *sdw_ctx publication until after startup succeeds Vijendar Mukunda
2026-11-07 16:15 ` sashiko-bot
2026-11-07 20:19 ` Mukunda,Vijendar
2026-11-07 15:45 ` [PATCH v5 19/25] soundwire: amd: propagate amd_init_sdw_manager() error on resume Vijendar Mukunda
2026-11-07 15:45 ` [PATCH v5 20/25] soundwire: amd: drop amd_deinit_sdw_manager() in POWER_OFF suspend Vijendar Mukunda
2026-11-07 15:45 ` [PATCH v5 21/25] soundwire: amd: replace >= ACP70 with explicit switch/case in PM paths Vijendar Mukunda
2026-11-07 15:45 ` [PATCH v5 22/25] soundwire: amd: fix interrupt gate and work drain ordering in PM ops Vijendar Mukunda
2026-11-07 16:25 ` sashiko-bot
2026-11-07 20:37 ` Mukunda,Vijendar
2026-11-07 15:45 ` [PATCH v5 23/25] soundwire: amd: check for NULL manager drvdata in sdw_amd_startup() Vijendar Mukunda
2026-11-07 15:45 ` [PATCH v5 24/25] soundwire: amd: fix shared-register RMW race in amd_sdw_set_device_state() Vijendar Mukunda
2026-11-07 15:45 ` [PATCH v5 25/25] soundwire: amd: fix shared-register RMW race in amd_sdw_host_wake_enable() Vijendar Mukunda
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=sashiko-outbox-203025@kernel.org \
--to=sashiko-bot@kernel.org \
--cc=Vijendar.Mukunda@amd.com \
--cc=linux-sound@vger.kernel.org \
--cc=sashiko-reviews@lists.linux.dev \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.