* [PATCH v3 0/1] dmaengine: xilinx: xdma: Fix broken PM suspend/resume
@ 2026-11-20 17:23 tumic
2026-11-20 17:23 ` [PATCH v3 1/1] " tumic
0 siblings, 1 reply; 5+ messages in thread
From: tumic @ 2026-11-20 17:23 UTC (permalink / raw)
To: Lizhi Hou, Brian Xu, Raj Kumar Rampelli, Vinod Koul, Frank Li,
Michal Simek
Cc: dmaengine, linux-arm-kernel, Martin Tůma
From: Martin Tůma <martin.tuma@digiteqautomotive.com>
Changes in v3:
- Reuse the HW IRQ configuration code in init and suspend.
Martin Tůma (1):
dmaengine: xilinx: xdma: Fix broken PM suspend/resume
drivers/dma/xilinx/xdma.c | 147 ++++++++++++++++++++++++++++++++------
1 file changed, 124 insertions(+), 23 deletions(-)
base-commit: 65e4fd942f72a9dba0e4e257290c4fa1aa756854
--
2.56.1
^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH v3 1/1] dmaengine: xilinx: xdma: Fix broken PM suspend/resume
2026-11-20 17:23 [PATCH v3 0/1] dmaengine: xilinx: xdma: Fix broken PM suspend/resume tumic
@ 2026-11-20 17:23 ` tumic
2026-11-20 17:32 ` Frank Li
2026-11-20 17:32 ` sashiko-bot
0 siblings, 2 replies; 5+ messages in thread
From: tumic @ 2026-11-20 17:23 UTC (permalink / raw)
To: Lizhi Hou, Brian Xu, Raj Kumar Rampelli, Vinod Koul, Frank Li,
Michal Simek
Cc: dmaengine, linux-arm-kernel, Martin Tůma
From: Martin Tůma <martin.tuma@digiteqautomotive.com>
Add the missing PM suspend/resume callbacks that properly reconfigure
the XDMA HW on PCIe suspend/resume.
Signed-off-by: Martin Tůma <martin.tuma@digiteqautomotive.com>
---
drivers/dma/xilinx/xdma.c | 147 ++++++++++++++++++++++++++++++++------
1 file changed, 124 insertions(+), 23 deletions(-)
diff --git a/drivers/dma/xilinx/xdma.c b/drivers/dma/xilinx/xdma.c
index 9d827c9a1267..d6772b38d8f7 100644
--- a/drivers/dma/xilinx/xdma.c
+++ b/drivers/dma/xilinx/xdma.c
@@ -123,6 +123,7 @@ struct xdma_desc {
* @irq_start: Start IRQ assigned to device
* @irq_num: Number of IRQ assigned to device
* @status: Initialization status
+ * @usr_irq_mask: User IRQ mask for PM suspend/resume
*/
struct xdma_device {
struct platform_device *pdev;
@@ -135,6 +136,7 @@ struct xdma_device {
u32 irq_start;
u32 irq_num;
u32 status;
+ u32 usr_irq_mask;
};
#define xdma_err(xdev, fmt, args...) \
@@ -398,6 +400,27 @@ static int xdma_xfer_stop(struct xdma_chan *xchan)
CHAN_CTRL_RUN_STOP);
}
+/**
+ * xdma_reconfig_channels - Reconfigure DMA channels
+ * @xdev: DMA device pointer
+ * @chans: channels configuration
+ * @chan_num: number of channels
+ */
+static int xdma_reconfig_channels(struct xdma_chan *chans,
+ u32 chan_num)
+{
+ int i, ret;
+
+ for (i = 0; i < chan_num; i++) {
+ /* init channel hardware */
+ ret = xdma_channel_init(&(chans[i]));
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
/**
* xdma_alloc_channels - Detect and allocate DMA channels
* @xdev: DMA device pointer
@@ -1018,6 +1041,55 @@ static int xdma_set_vector_reg(struct xdma_device *xdev, u32 vec_tbl_start,
return 0;
}
+/**
+ * xdma_irq_config - Configure IRQs
+ * @xdev: DMA device pointer
+ */
+static int xdma_irq_config(struct xdma_device *xdev)
+{
+ u32 user_irq_start;
+ int ret;
+
+ /* configure hardware IRQ registers */
+ ret = xdma_set_vector_reg(xdev, XDMA_IRQ_CHAN_VEC_NUM, 0,
+ XDMA_CHAN_NUM(xdev));
+ if (ret) {
+ xdma_err(xdev, "failed to set channel vectors: %d", ret);
+ return ret;
+ }
+
+ /* configure user IRQ registers if needed */
+ user_irq_start = XDMA_CHAN_NUM(xdev);
+ if (xdev->irq_num > user_irq_start) {
+ ret = xdma_set_vector_reg(xdev, XDMA_IRQ_USER_VEC_NUM,
+ user_irq_start,
+ xdev->irq_num - user_irq_start);
+ if (ret) {
+ xdma_err(xdev, "failed to set user vectors: %d", ret);
+ return ret;
+ }
+ }
+
+ /* enable channels interrupts */
+ ret = regmap_write(xdev->rmap, XDMA_IRQ_CHAN_INT_EN_W1S, ~0);
+ if (ret) {
+ xdma_err(xdev, "failed to enable channel IRQs: %d", ret);
+ return ret;
+ }
+
+ /* enable user interrupts if needed */
+ if (xdev->irq_num > user_irq_start) {
+ ret = regmap_write(xdev->rmap, XDMA_IRQ_USER_INT_EN_W1S,
+ xdev->usr_irq_mask);
+ if (ret) {
+ xdma_err(xdev, "failed to enable user IRQs: %d", ret);
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
/**
* xdma_irq_init - initialize IRQs
* @xdev: DMA device pointer
@@ -1025,7 +1097,6 @@ static int xdma_set_vector_reg(struct xdma_device *xdev, u32 vec_tbl_start,
static int xdma_irq_init(struct xdma_device *xdev)
{
u32 irq = xdev->irq_start;
- u32 user_irq_start;
int i, j, ret;
/* return failure if there are not enough IRQs */
@@ -1060,28 +1131,8 @@ static int xdma_irq_init(struct xdma_device *xdev)
irq++;
}
- /* config hardware IRQ registers */
- ret = xdma_set_vector_reg(xdev, XDMA_IRQ_CHAN_VEC_NUM, 0,
- XDMA_CHAN_NUM(xdev));
- if (ret) {
- xdma_err(xdev, "failed to set channel vectors: %d", ret);
- goto failed_init_c2h;
- }
-
- /* config user IRQ registers if needed */
- user_irq_start = XDMA_CHAN_NUM(xdev);
- if (xdev->irq_num > user_irq_start) {
- ret = xdma_set_vector_reg(xdev, XDMA_IRQ_USER_VEC_NUM,
- user_irq_start,
- xdev->irq_num - user_irq_start);
- if (ret) {
- xdma_err(xdev, "failed to set user vectors: %d", ret);
- goto failed_init_c2h;
- }
- }
-
- /* enable interrupt */
- ret = regmap_write(xdev->rmap, XDMA_IRQ_CHAN_INT_EN_W1S, ~0);
+ /* configure all HW IRQ registers */
+ ret = xdma_irq_config(xdev);
if (ret)
goto failed_init_c2h;
@@ -1297,15 +1348,65 @@ static int xdma_probe(struct platform_device *pdev)
return ret;
}
+/**
+ * xdma_suspend - PM suspend callback
+ * @dev: XDMA device pointer
+ */
+static int xdma_suspend(struct device *dev)
+{
+ struct xdma_device *xdev = dev_get_drvdata(dev);
+ int ret;
+
+ ret = regmap_read(xdev->rmap, XDMA_IRQ_USER_INT_EN,
+ &xdev->usr_irq_mask);
+ if (ret) {
+ xdma_err(xdev, "User IRQ vector backup failed: %d", ret);
+ return ret;
+ }
+
+ ret = regmap_write(xdev->rmap, XDMA_IRQ_CHAN_INT_EN_W1C, ~0);
+ if (ret)
+ xdma_err(xdev, "DMA channels IRQ disable failed: %d", ret);
+
+ return ret;
+}
+
+/**
+ * xdma_resume - PM resume callback
+ * @dev: XDMA device pointer
+ */
+static int xdma_resume(struct device *dev)
+{
+ struct xdma_device *xdev = dev_get_drvdata(dev);
+ int ret;
+
+ ret = xdma_reconfig_channels(xdev->h2c_chans, xdev->h2c_chan_num);
+ if (ret) {
+ xdma_err(xdev, "H2C channels reconfiguration failed: %d", ret);
+ return ret;
+ }
+
+ ret = xdma_reconfig_channels(xdev->c2h_chans, xdev->c2h_chan_num);
+ if (ret) {
+ xdma_err(xdev, "C2H channels reconfiguration failed: %d", ret);
+ return ret;
+ }
+
+ return xdma_irq_config(xdev);
+}
+
static const struct platform_device_id xdma_id_table[] = {
{ "xdma", 0},
{ },
};
MODULE_DEVICE_TABLE(platform, xdma_id_table);
+static DEFINE_NOIRQ_DEV_PM_OPS(xdma_dev_pm_ops, xdma_suspend, xdma_resume);
+
static struct platform_driver xdma_driver = {
.driver = {
.name = "xdma",
+ .pm = pm_sleep_ptr(&xdma_dev_pm_ops),
},
.id_table = xdma_id_table,
.probe = xdma_probe,
--
2.56.1
^ permalink raw reply related [flat|nested] 5+ messages in thread
* Re: [PATCH v3 1/1] dmaengine: xilinx: xdma: Fix broken PM suspend/resume
2026-11-20 17:23 ` [PATCH v3 1/1] " tumic
@ 2026-11-20 17:32 ` Frank Li
2026-11-20 17:50 ` Martin Tůma
2026-11-20 17:32 ` sashiko-bot
1 sibling, 1 reply; 5+ messages in thread
From: Frank Li @ 2026-11-20 17:32 UTC (permalink / raw)
To: tumic
Cc: Lizhi Hou, Brian Xu, Raj Kumar Rampelli, Vinod Koul, Frank Li,
Michal Simek, dmaengine, linux-arm-kernel, Martin Tůma
On Fri, Nov 20, 2026 at 06:23:56PM +0100, tumic@gpxsee.org wrote:
> From: Martin Tůma <martin.tuma@digiteqautomotive.com>
>
> Add the missing PM suspend/resume callbacks that properly reconfigure
> the XDMA HW on PCIe suspend/resume.
>
> Signed-off-by: Martin Tůma <martin.tuma@digiteqautomotive.com>
> ---
Put change log here when bump version. And you post 3 version today.
Slow down, post one version at most per day.
Frank
> drivers/dma/xilinx/xdma.c | 147 ++++++++++++++++++++++++++++++++------
> 1 file changed, 124 insertions(+), 23 deletions(-)
>
> diff --git a/drivers/dma/xilinx/xdma.c b/drivers/dma/xilinx/xdma.c
> index 9d827c9a1267..d6772b38d8f7 100644
> --- a/drivers/dma/xilinx/xdma.c
> +++ b/drivers/dma/xilinx/xdma.c
> @@ -123,6 +123,7 @@ struct xdma_desc {
> * @irq_start: Start IRQ assigned to device
> * @irq_num: Number of IRQ assigned to device
> * @status: Initialization status
> + * @usr_irq_mask: User IRQ mask for PM suspend/resume
> */
> struct xdma_device {
> struct platform_device *pdev;
> @@ -135,6 +136,7 @@ struct xdma_device {
> u32 irq_start;
> u32 irq_num;
> u32 status;
> + u32 usr_irq_mask;
> };
>
> #define xdma_err(xdev, fmt, args...) \
> @@ -398,6 +400,27 @@ static int xdma_xfer_stop(struct xdma_chan *xchan)
> CHAN_CTRL_RUN_STOP);
> }
>
> +/**
> + * xdma_reconfig_channels - Reconfigure DMA channels
> + * @xdev: DMA device pointer
> + * @chans: channels configuration
> + * @chan_num: number of channels
> + */
> +static int xdma_reconfig_channels(struct xdma_chan *chans,
> + u32 chan_num)
> +{
> + int i, ret;
> +
> + for (i = 0; i < chan_num; i++) {
> + /* init channel hardware */
> + ret = xdma_channel_init(&(chans[i]));
> + if (ret)
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> /**
> * xdma_alloc_channels - Detect and allocate DMA channels
> * @xdev: DMA device pointer
> @@ -1018,6 +1041,55 @@ static int xdma_set_vector_reg(struct xdma_device *xdev, u32 vec_tbl_start,
> return 0;
> }
>
> +/**
> + * xdma_irq_config - Configure IRQs
> + * @xdev: DMA device pointer
> + */
> +static int xdma_irq_config(struct xdma_device *xdev)
> +{
> + u32 user_irq_start;
> + int ret;
> +
> + /* configure hardware IRQ registers */
> + ret = xdma_set_vector_reg(xdev, XDMA_IRQ_CHAN_VEC_NUM, 0,
> + XDMA_CHAN_NUM(xdev));
> + if (ret) {
> + xdma_err(xdev, "failed to set channel vectors: %d", ret);
> + return ret;
> + }
> +
> + /* configure user IRQ registers if needed */
> + user_irq_start = XDMA_CHAN_NUM(xdev);
> + if (xdev->irq_num > user_irq_start) {
> + ret = xdma_set_vector_reg(xdev, XDMA_IRQ_USER_VEC_NUM,
> + user_irq_start,
> + xdev->irq_num - user_irq_start);
> + if (ret) {
> + xdma_err(xdev, "failed to set user vectors: %d", ret);
> + return ret;
> + }
> + }
> +
> + /* enable channels interrupts */
> + ret = regmap_write(xdev->rmap, XDMA_IRQ_CHAN_INT_EN_W1S, ~0);
> + if (ret) {
> + xdma_err(xdev, "failed to enable channel IRQs: %d", ret);
> + return ret;
> + }
> +
> + /* enable user interrupts if needed */
> + if (xdev->irq_num > user_irq_start) {
> + ret = regmap_write(xdev->rmap, XDMA_IRQ_USER_INT_EN_W1S,
> + xdev->usr_irq_mask);
> + if (ret) {
> + xdma_err(xdev, "failed to enable user IRQs: %d", ret);
> + return ret;
> + }
> + }
> +
> + return 0;
> +}
> +
> /**
> * xdma_irq_init - initialize IRQs
> * @xdev: DMA device pointer
> @@ -1025,7 +1097,6 @@ static int xdma_set_vector_reg(struct xdma_device *xdev, u32 vec_tbl_start,
> static int xdma_irq_init(struct xdma_device *xdev)
> {
> u32 irq = xdev->irq_start;
> - u32 user_irq_start;
> int i, j, ret;
>
> /* return failure if there are not enough IRQs */
> @@ -1060,28 +1131,8 @@ static int xdma_irq_init(struct xdma_device *xdev)
> irq++;
> }
>
> - /* config hardware IRQ registers */
> - ret = xdma_set_vector_reg(xdev, XDMA_IRQ_CHAN_VEC_NUM, 0,
> - XDMA_CHAN_NUM(xdev));
> - if (ret) {
> - xdma_err(xdev, "failed to set channel vectors: %d", ret);
> - goto failed_init_c2h;
> - }
> -
> - /* config user IRQ registers if needed */
> - user_irq_start = XDMA_CHAN_NUM(xdev);
> - if (xdev->irq_num > user_irq_start) {
> - ret = xdma_set_vector_reg(xdev, XDMA_IRQ_USER_VEC_NUM,
> - user_irq_start,
> - xdev->irq_num - user_irq_start);
> - if (ret) {
> - xdma_err(xdev, "failed to set user vectors: %d", ret);
> - goto failed_init_c2h;
> - }
> - }
> -
> - /* enable interrupt */
> - ret = regmap_write(xdev->rmap, XDMA_IRQ_CHAN_INT_EN_W1S, ~0);
> + /* configure all HW IRQ registers */
> + ret = xdma_irq_config(xdev);
> if (ret)
> goto failed_init_c2h;
>
> @@ -1297,15 +1348,65 @@ static int xdma_probe(struct platform_device *pdev)
> return ret;
> }
>
> +/**
> + * xdma_suspend - PM suspend callback
> + * @dev: XDMA device pointer
> + */
> +static int xdma_suspend(struct device *dev)
> +{
> + struct xdma_device *xdev = dev_get_drvdata(dev);
> + int ret;
> +
> + ret = regmap_read(xdev->rmap, XDMA_IRQ_USER_INT_EN,
> + &xdev->usr_irq_mask);
> + if (ret) {
> + xdma_err(xdev, "User IRQ vector backup failed: %d", ret);
> + return ret;
> + }
> +
> + ret = regmap_write(xdev->rmap, XDMA_IRQ_CHAN_INT_EN_W1C, ~0);
> + if (ret)
> + xdma_err(xdev, "DMA channels IRQ disable failed: %d", ret);
> +
> + return ret;
> +}
> +
> +/**
> + * xdma_resume - PM resume callback
> + * @dev: XDMA device pointer
> + */
> +static int xdma_resume(struct device *dev)
> +{
> + struct xdma_device *xdev = dev_get_drvdata(dev);
> + int ret;
> +
> + ret = xdma_reconfig_channels(xdev->h2c_chans, xdev->h2c_chan_num);
> + if (ret) {
> + xdma_err(xdev, "H2C channels reconfiguration failed: %d", ret);
> + return ret;
> + }
> +
> + ret = xdma_reconfig_channels(xdev->c2h_chans, xdev->c2h_chan_num);
> + if (ret) {
> + xdma_err(xdev, "C2H channels reconfiguration failed: %d", ret);
> + return ret;
> + }
> +
> + return xdma_irq_config(xdev);
> +}
> +
> static const struct platform_device_id xdma_id_table[] = {
> { "xdma", 0},
> { },
> };
> MODULE_DEVICE_TABLE(platform, xdma_id_table);
>
> +static DEFINE_NOIRQ_DEV_PM_OPS(xdma_dev_pm_ops, xdma_suspend, xdma_resume);
> +
> static struct platform_driver xdma_driver = {
> .driver = {
> .name = "xdma",
> + .pm = pm_sleep_ptr(&xdma_dev_pm_ops),
> },
> .id_table = xdma_id_table,
> .probe = xdma_probe,
> --
> 2.56.1
>
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH v3 1/1] dmaengine: xilinx: xdma: Fix broken PM suspend/resume
2026-11-20 17:23 ` [PATCH v3 1/1] " tumic
2026-11-20 17:32 ` Frank Li
@ 2026-11-20 17:32 ` sashiko-bot
1 sibling, 0 replies; 5+ messages in thread
From: sashiko-bot @ 2026-11-20 17:32 UTC (permalink / raw)
To: tumic; +Cc: dmaengine, vkoul, Frank.Li
Thank you for your contribution! Sashiko AI review found 1 potential
issue to consider:
- [Low] dmaengine: xilinx: xdma: excess @xdev kernel-doc on
xdma_reconfig_channels()
--
commit a64f0416a1ecd1d433bba480228119fa8fc96611
Author: Martin Tůma <martin.tuma@digiteqautomotive.com>
dmaengine: xilinx: xdma: Fix broken PM suspend/resume
This commit adds noireq PM suspend and resume callbacks to save interrupt
masks and reconfigure the XDMA channels and interrupt registers across
suspend and resume.
> diff --git a/drivers/dma/xilinx/xdma.c b/drivers/dma/xilinx/xdma.c
> index 9d827c9a12674..d6772b38d8f7c 100644
> --- a/drivers/dma/xilinx/xdma.c
> +++ b/drivers/dma/xilinx/xdma.c
[ ... ]
> @@ -398,6 +400,27 @@ static int xdma_xfer_stop(struct xdma_chan *xchan)
> CHAN_CTRL_RUN_STOP);
> }
>
> +/**
> + * xdma_reconfig_channels - Reconfigure DMA channels
> + * @xdev: DMA device pointer
> + * @chans: channels configuration
> + * @chan_num: number of channels
> + */
> +static int xdma_reconfig_channels(struct xdma_chan *chans,
> + u32 chan_num)
[Severity: Low]
The kernel-doc comment for xdma_reconfig_channels() documents @xdev, which
is not a parameter of the function and causes a kernel-doc warning with
W=1.
--
Sashiko AI review · https://sashiko.dev/#/patchset/20261120172356.5858-1-tumic@gpxsee.org?part=1
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [PATCH v3 1/1] dmaengine: xilinx: xdma: Fix broken PM suspend/resume
2026-11-20 17:32 ` Frank Li
@ 2026-11-20 17:50 ` Martin Tůma
0 siblings, 0 replies; 5+ messages in thread
From: Martin Tůma @ 2026-11-20 17:50 UTC (permalink / raw)
To: Frank Li
Cc: Lizhi Hou, Brian Xu, Raj Kumar Rampelli, Vinod Koul, Frank Li,
Michal Simek, dmaengine, linux-arm-kernel, Martin Tůma
On 11/20/26 6:32 PM, Frank Li wrote:
> On Fri, Nov 20, 2026 at 06:23:56PM +0100, tumic@gpxsee.org wrote:
>> From: Martin Tůma <martin.tuma@digiteqautomotive.com>
>>
>> Add the missing PM suspend/resume callbacks that properly reconfigure
>> the XDMA HW on PCIe suspend/resume.
>>
>> Signed-off-by: Martin Tůma <martin.tuma@digiteqautomotive.com>
>> ---
>
> Put change log here when bump version. And you post 3 version today.
> Slow down, post one version at most per day.
>
The changelog is in the cover-letter like usual in all other kernel
mailing lists I have contributed to so far. Does the dmaengine list have
some special rules different from all the other mailing lists?
The v2 and v3 patches are just "cosmetics" changes in response to the
sashiko-bot review. If you think my responses are to fast, than maybe
someone should slow down the AI bot response times ;-)
M.
> Frank
>
>> drivers/dma/xilinx/xdma.c | 147 ++++++++++++++++++++++++++++++++------
>> 1 file changed, 124 insertions(+), 23 deletions(-)
>>
>> diff --git a/drivers/dma/xilinx/xdma.c b/drivers/dma/xilinx/xdma.c
>> index 9d827c9a1267..d6772b38d8f7 100644
>> --- a/drivers/dma/xilinx/xdma.c
>> +++ b/drivers/dma/xilinx/xdma.c
>> @@ -123,6 +123,7 @@ struct xdma_desc {
>> * @irq_start: Start IRQ assigned to device
>> * @irq_num: Number of IRQ assigned to device
>> * @status: Initialization status
>> + * @usr_irq_mask: User IRQ mask for PM suspend/resume
>> */
>> struct xdma_device {
>> struct platform_device *pdev;
>> @@ -135,6 +136,7 @@ struct xdma_device {
>> u32 irq_start;
>> u32 irq_num;
>> u32 status;
>> + u32 usr_irq_mask;
>> };
>>
>> #define xdma_err(xdev, fmt, args...) \
>> @@ -398,6 +400,27 @@ static int xdma_xfer_stop(struct xdma_chan *xchan)
>> CHAN_CTRL_RUN_STOP);
>> }
>>
>> +/**
>> + * xdma_reconfig_channels - Reconfigure DMA channels
>> + * @xdev: DMA device pointer
>> + * @chans: channels configuration
>> + * @chan_num: number of channels
>> + */
>> +static int xdma_reconfig_channels(struct xdma_chan *chans,
>> + u32 chan_num)
>> +{
>> + int i, ret;
>> +
>> + for (i = 0; i < chan_num; i++) {
>> + /* init channel hardware */
>> + ret = xdma_channel_init(&(chans[i]));
>> + if (ret)
>> + return ret;
>> + }
>> +
>> + return 0;
>> +}
>> +
>> /**
>> * xdma_alloc_channels - Detect and allocate DMA channels
>> * @xdev: DMA device pointer
>> @@ -1018,6 +1041,55 @@ static int xdma_set_vector_reg(struct xdma_device *xdev, u32 vec_tbl_start,
>> return 0;
>> }
>>
>> +/**
>> + * xdma_irq_config - Configure IRQs
>> + * @xdev: DMA device pointer
>> + */
>> +static int xdma_irq_config(struct xdma_device *xdev)
>> +{
>> + u32 user_irq_start;
>> + int ret;
>> +
>> + /* configure hardware IRQ registers */
>> + ret = xdma_set_vector_reg(xdev, XDMA_IRQ_CHAN_VEC_NUM, 0,
>> + XDMA_CHAN_NUM(xdev));
>> + if (ret) {
>> + xdma_err(xdev, "failed to set channel vectors: %d", ret);
>> + return ret;
>> + }
>> +
>> + /* configure user IRQ registers if needed */
>> + user_irq_start = XDMA_CHAN_NUM(xdev);
>> + if (xdev->irq_num > user_irq_start) {
>> + ret = xdma_set_vector_reg(xdev, XDMA_IRQ_USER_VEC_NUM,
>> + user_irq_start,
>> + xdev->irq_num - user_irq_start);
>> + if (ret) {
>> + xdma_err(xdev, "failed to set user vectors: %d", ret);
>> + return ret;
>> + }
>> + }
>> +
>> + /* enable channels interrupts */
>> + ret = regmap_write(xdev->rmap, XDMA_IRQ_CHAN_INT_EN_W1S, ~0);
>> + if (ret) {
>> + xdma_err(xdev, "failed to enable channel IRQs: %d", ret);
>> + return ret;
>> + }
>> +
>> + /* enable user interrupts if needed */
>> + if (xdev->irq_num > user_irq_start) {
>> + ret = regmap_write(xdev->rmap, XDMA_IRQ_USER_INT_EN_W1S,
>> + xdev->usr_irq_mask);
>> + if (ret) {
>> + xdma_err(xdev, "failed to enable user IRQs: %d", ret);
>> + return ret;
>> + }
>> + }
>> +
>> + return 0;
>> +}
>> +
>> /**
>> * xdma_irq_init - initialize IRQs
>> * @xdev: DMA device pointer
>> @@ -1025,7 +1097,6 @@ static int xdma_set_vector_reg(struct xdma_device *xdev, u32 vec_tbl_start,
>> static int xdma_irq_init(struct xdma_device *xdev)
>> {
>> u32 irq = xdev->irq_start;
>> - u32 user_irq_start;
>> int i, j, ret;
>>
>> /* return failure if there are not enough IRQs */
>> @@ -1060,28 +1131,8 @@ static int xdma_irq_init(struct xdma_device *xdev)
>> irq++;
>> }
>>
>> - /* config hardware IRQ registers */
>> - ret = xdma_set_vector_reg(xdev, XDMA_IRQ_CHAN_VEC_NUM, 0,
>> - XDMA_CHAN_NUM(xdev));
>> - if (ret) {
>> - xdma_err(xdev, "failed to set channel vectors: %d", ret);
>> - goto failed_init_c2h;
>> - }
>> -
>> - /* config user IRQ registers if needed */
>> - user_irq_start = XDMA_CHAN_NUM(xdev);
>> - if (xdev->irq_num > user_irq_start) {
>> - ret = xdma_set_vector_reg(xdev, XDMA_IRQ_USER_VEC_NUM,
>> - user_irq_start,
>> - xdev->irq_num - user_irq_start);
>> - if (ret) {
>> - xdma_err(xdev, "failed to set user vectors: %d", ret);
>> - goto failed_init_c2h;
>> - }
>> - }
>> -
>> - /* enable interrupt */
>> - ret = regmap_write(xdev->rmap, XDMA_IRQ_CHAN_INT_EN_W1S, ~0);
>> + /* configure all HW IRQ registers */
>> + ret = xdma_irq_config(xdev);
>> if (ret)
>> goto failed_init_c2h;
>>
>> @@ -1297,15 +1348,65 @@ static int xdma_probe(struct platform_device *pdev)
>> return ret;
>> }
>>
>> +/**
>> + * xdma_suspend - PM suspend callback
>> + * @dev: XDMA device pointer
>> + */
>> +static int xdma_suspend(struct device *dev)
>> +{
>> + struct xdma_device *xdev = dev_get_drvdata(dev);
>> + int ret;
>> +
>> + ret = regmap_read(xdev->rmap, XDMA_IRQ_USER_INT_EN,
>> + &xdev->usr_irq_mask);
>> + if (ret) {
>> + xdma_err(xdev, "User IRQ vector backup failed: %d", ret);
>> + return ret;
>> + }
>> +
>> + ret = regmap_write(xdev->rmap, XDMA_IRQ_CHAN_INT_EN_W1C, ~0);
>> + if (ret)
>> + xdma_err(xdev, "DMA channels IRQ disable failed: %d", ret);
>> +
>> + return ret;
>> +}
>> +
>> +/**
>> + * xdma_resume - PM resume callback
>> + * @dev: XDMA device pointer
>> + */
>> +static int xdma_resume(struct device *dev)
>> +{
>> + struct xdma_device *xdev = dev_get_drvdata(dev);
>> + int ret;
>> +
>> + ret = xdma_reconfig_channels(xdev->h2c_chans, xdev->h2c_chan_num);
>> + if (ret) {
>> + xdma_err(xdev, "H2C channels reconfiguration failed: %d", ret);
>> + return ret;
>> + }
>> +
>> + ret = xdma_reconfig_channels(xdev->c2h_chans, xdev->c2h_chan_num);
>> + if (ret) {
>> + xdma_err(xdev, "C2H channels reconfiguration failed: %d", ret);
>> + return ret;
>> + }
>> +
>> + return xdma_irq_config(xdev);
>> +}
>> +
>> static const struct platform_device_id xdma_id_table[] = {
>> { "xdma", 0},
>> { },
>> };
>> MODULE_DEVICE_TABLE(platform, xdma_id_table);
>>
>> +static DEFINE_NOIRQ_DEV_PM_OPS(xdma_dev_pm_ops, xdma_suspend, xdma_resume);
>> +
>> static struct platform_driver xdma_driver = {
>> .driver = {
>> .name = "xdma",
>> + .pm = pm_sleep_ptr(&xdma_dev_pm_ops),
>> },
>> .id_table = xdma_id_table,
>> .probe = xdma_probe,
>> --
>> 2.56.1
>>
>
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2026-11-20 17:50 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-11-20 17:23 [PATCH v3 0/1] dmaengine: xilinx: xdma: Fix broken PM suspend/resume tumic
2026-11-20 17:23 ` [PATCH v3 1/1] " tumic
2026-11-20 17:32 ` Frank Li
2026-11-20 17:50 ` Martin Tůma
2026-11-20 17:32 ` sashiko-bot
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.