* [PATCH] cxl/region: Keep a decoder staged when its auto attach fails
@ 2026-11-20 18:12 Dave Jiang
2026-11-20 18:39 ` sashiko-bot
0 siblings, 1 reply; 2+ messages in thread
From: Dave Jiang @ 2026-11-20 18:12 UTC (permalink / raw)
To: linux-cxl; +Cc: dave, jic23, alison.schofield, vishal.l.verma
An auto region lists each arriving endpoint decoder as a target in the
AUTO_STAGED state. Once all targets are there, cxl_region_attach_position()
attaches each one port by port. Attaching at the endpoint port sets
cxld->region and moves the decoder to AUTO. If a later port fails, the
unwind clears cxld->region again, but the decoder stays in AUTO and stays
listed as a target.
When that endpoint goes away, __cxl_decoder_detach() finds no region and
calls cxl_cancel_auto_attach(), which only removes AUTO_STAGED decoders.
The freed decoder is left in the region's target list, and the next
teardown of the region reads it:
BUG: KASAN: slab-use-after-free in __cxl_decoder_detach+0xa6/0x3b0 [cxl_core]
cxl_decoder_detach+0x6c/0xf0 [cxl_core]
unregister_region+0xcb/0x470 [cxl_core]
kill_regions+0x9f/0x100 [cxl_core]
Put the decoder back in AUTO_STAGED when the unwind leaves it with no
region.
Fixes: 87805c32e6ad ("cxl/region: Fix use-after-free from auto assembly failure")
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
---
drivers/cxl/core/region.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/cxl/core/region.c b/drivers/cxl/core/region.c
index a048bd5c06cb..f1083976592f 100644
--- a/drivers/cxl/core/region.c
+++ b/drivers/cxl/core/region.c
@@ -1830,6 +1830,14 @@ static int cxl_region_attach_position(struct cxl_region *cxlr,
for (iter = cxled_to_port(cxled); !is_cxl_root(iter);
iter = to_cxl_port(iter->dev.parent))
cxl_port_detach_region(iter, cxlr, cxled);
+
+ /*
+ * Attaching at the endpoint port moved a staged decoder to AUTO, and
+ * the unwind above cleared its region again. It is still listed as a
+ * target, so keep it staged for cxl_cancel_auto_attach() to find.
+ */
+ if (cxled->state == CXL_DECODER_STATE_AUTO && !cxled->cxld.region)
+ cxled->state = CXL_DECODER_STATE_AUTO_STAGED;
return rc;
}
base-commit: aebb7274476403040d582c61478df8f4a7bf9cd3
--
2.54.0
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH] cxl/region: Keep a decoder staged when its auto attach fails
2026-11-20 18:12 [PATCH] cxl/region: Keep a decoder staged when its auto attach fails Dave Jiang
@ 2026-11-20 18:39 ` sashiko-bot
0 siblings, 0 replies; 2+ messages in thread
From: sashiko-bot @ 2026-11-20 18:39 UTC (permalink / raw)
To: Dave Jiang, linux-cxl
Thank you for your contribution! Sashiko AI review found no new issues
in this patch, but noticed 1 related pre-existing issue it does not
introduce:
- [High] cxl/region: duplicate target attach corrupts region refs in
cxl_region_attach() [1]
--
commit bb73ffca81dd406b180098a77a7d18645c37f8a1
Author: Dave Jiang <dave.jiang@intel.com>
cxl/region: Keep a decoder staged when its auto attach fails
This commit restores an endpoint decoder's state to
CXL_DECODER_STATE_AUTO_STAGED if cxl_region_attach_position() fails and
unwinds its region attachment.
> diff --git a/drivers/cxl/core/region.c b/drivers/cxl/core/region.c
> index a048bd5c06cb6..f1083976592f9 100644
> --- a/drivers/cxl/core/region.c
> +++ b/drivers/cxl/core/region.c
> @@ -1830,6 +1830,14 @@ static int cxl_region_attach_position(struct cxl_region *cxlr,
> for (iter = cxled_to_port(cxled); !is_cxl_root(iter);
> iter = to_cxl_port(iter->dev.parent))
> cxl_port_detach_region(iter, cxlr, cxled);
> +
> + /*
> + * Attaching at the endpoint port moved a staged decoder to AUTO, and
> + * the unwind above cleared its region again. It is still listed as a
> + * target, so keep it staged for cxl_cancel_auto_attach() to find.
> + */
> + if (cxled->state == CXL_DECODER_STATE_AUTO && !cxled->cxld.region)
> + cxled->state = CXL_DECODER_STATE_AUTO_STAGED;
> return rc;
> }
[Severity: High]
This problem wasn't introduced by this patch, but can a duplicate write to
a targetN sysfs attribute cause this unwind loop to detach an already
attached target [1]?
In cxl_region_validate_position(), if p->targets[pos] == cxled, it returns
0:
drivers/cxl/core/region.c:cxl_region_validate_position() {
...
if (p->targets[pos] == cxled)
return 0;
...
}
cxl_region_attach() treats that 0 return as success and calls
cxl_region_attach_position() a second time for the same decoder instead of
returning early. When configuring a manual region with interleave_ways >= 2,
attaching succeeds again at the endpoint port (incrementing nr_eps to 2)
and then fails at the parent port (for example with -EBUSY in
cxl_rr_ep_add() because cxled is already in cxl_rr->endpoints).
The err unwind in cxl_region_attach_position() then detaches cxled across
all ports up to the root and frees the ancestor ports' cxl_region_ref while
p->targets[pos] remains set. Once the remaining targets are attached,
cxl_port_setup_targets() gets NULL from cxl_rr_load() on the ancestor port
and dereferences cxl_rr->decoder.
[1] https://sashiko.dev/#/bug/linux-bc3dac83-96b6-4b99-8e2f-b2f4ad93b98b
--
Sashiko AI review · https://sashiko.dev/#/patchset/20261120181228.1466310-1-dave.jiang@intel.com?part=1
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2026-11-20 18:39 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-11-20 18:12 [PATCH] cxl/region: Keep a decoder staged when its auto attach fails Dave Jiang
2026-11-20 18:39 ` sashiko-bot
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.