From: <mariook@wp.pl>
To: Takashi Iwai <tiwai@suse.de>, Tobin Davis <tdavis@dsl-only.net>
Cc: alsa-devel@lists.sourceforge.net
Subject: Re: [PATCH] Asus A6RP and ALC861 headphones problem solved
Date: Fri, 20 Oct 2006 22:21:21 +0200 [thread overview]
Message-ID: <003801c6f485$4ef87010$83030a54@MIREK> (raw)
In-Reply-To: s5hejt32jtz.wl%tiwai@suse.de
[-- Attachment #1: Type: text/plain, Size: 1767 bytes --]
----- Original Message -----
From: "Takashi Iwai" <tiwai@suse.de>
To: "Tobin Davis" <tdavis@dsl-only.net>
Cc: <mariook@wp.pl>; <alsa-devel@lists.sourceforge.net>
Sent: Friday, October 20, 2006 3:33 PM
Subject: Re: [Alsa-devel] [PATCH] Asus A6RP and ALC861 headphones problem
solved
> At Thu, 19 Oct 2006 16:39:10 -0700,
> Tobin Davis wrote:
>>
>> What Takashi needs is a summary and description for the repository.
>> Here's an example from one of my patches:
>>
>> Summery: hda-codec - Add toshiba model to ALC861 codec
>>
>> This patch adds support for Toshiba laptops. Code is from
>> RealTek's alsa-driver-1.0.12-4.05b tree.
>>
>> Signed-off-by: Tobin Davis <tdavis@dsl-only.net>
>
> Yep, exactly.
>
>> Also, I made a minor revision to your patch, changing it from asus_a6rp
>> to just asus. I have been working on a similar patch for another Asus
>> Laptop (F3J), and if this works for them, great (otherwise I'm back to
>> square one). Still, better to be more generic than model specific.
>> Leave the model specific details for the config table array. Attached
>> are my changes.
>
> Don't forget to add an entry with modelname="asus", and change
> ALSA-Configuration.txt appropriately, too.
>
>
> Thanks,
>
> Takashi
Ok, so here it is :)
Summary: hda-codec - Add asus model to ALC861 codec
This patch adds support for Asus laptops (for example: Asus
A6Rp-AP002).
Signed-off-by: Mariusz Domanski <mariook@wp.pl>
I modified patch_realtek.c from the newest hg tree and made asus.patch
basing on it (also included change made by Tobin - pci_subdevice for another
asus laptop).
I also modified the newest ALSA-Configuration.txt and made patch.
Patches are in the attachment.
Thanks,
Mariusz
[-- Attachment #2: asus.patch --]
[-- Type: application/octet-stream, Size: 8000 bytes --]
--- patch_realtek.c 2006-10-20 20:58:06.000000000 +0200
+++ alsa-kernel/pci/hda/patch_realtek.c 2006-10-20 21:17:27.000000000 +0200
@@ -100,6 +100,7 @@
ALC861_6ST_DIG,
ALC861_UNIWILL_M31,
ALC861_TOSHIBA,
+ ALC861_ASUS,
ALC861_AUTO,
ALC861_MODEL_LAST,
};
@@ -6650,6 +6651,44 @@
{ 4, alc861_uniwill_m31_ch4_init },
};
+/* Set mic1 and line-in as input and unmute the mixer */
+static struct hda_verb alc861_asus_ch2_init[] = {
+ /* set pin widget 1Ah (line in) for input */
+ { 0x0c, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20 },
+ /* set pin widget 18h (mic1/2) for input, for mic also enable the vref */
+ { 0x0d, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24 },
+
+ { 0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0xb00c },
+#if 0
+ { 0x15, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x01 << 8)) }, /*mic*/
+ { 0x15, AC_VERB_SET_AMP_GAIN_MUTE, (0x7000 | (0x02 << 8)) }, /*line-in*/
+#endif
+ { } /* end */
+};
+/* Set mic1 nad line-in as output and mute mixer */
+static struct hda_verb alc861_asus_ch6_init[] = {
+ /* set pin widget 1Ah (line in) for output (Back Surround)*/
+ { 0x0c, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40 },
+ /* { 0x0c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE }, */
+ /* set pin widget 18h (mic1) for output (CLFE)*/
+ { 0x0d, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40 },
+ /* { 0x0d, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE }, */
+ { 0x0c, AC_VERB_SET_CONNECT_SEL, 0x00 },
+ { 0x0d, AC_VERB_SET_CONNECT_SEL, 0x00 },
+
+ { 0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0xb080 },
+#if 0
+ { 0x15, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x01 << 8)) }, /*mic*/
+ { 0x15, AC_VERB_SET_AMP_GAIN_MUTE, (0x7080 | (0x02 << 8)) }, /*line in*/
+#endif
+ { } /* end */
+};
+
+static struct hda_channel_mode alc861_asus_modes[2] = {
+ { 2, alc861_asus_ch2_init },
+ { 6, alc861_asus_ch6_init },
+};
+
/* patch-ALC861 */
static struct snd_kcontrol_new alc861_base_mixer[] = {
@@ -6790,6 +6829,49 @@
},
{ } /* end */
};
+
+static struct snd_kcontrol_new alc861_asus_mixer[] = {
+ /* output mixer control */
+ HDA_CODEC_MUTE("Front Playback Switch", 0x03, 0x0, HDA_OUTPUT),
+ HDA_CODEC_MUTE("Surround Playback Switch", 0x06, 0x0, HDA_OUTPUT),
+ HDA_CODEC_MUTE_MONO("Center Playback Switch", 0x05, 1, 0x0, HDA_OUTPUT),
+ HDA_CODEC_MUTE_MONO("LFE Playback Switch", 0x05, 2, 0x0, HDA_OUTPUT),
+ HDA_CODEC_MUTE("Side Playback Switch", 0x04, 0x0, HDA_OUTPUT),
+
+ /* Input mixer control */
+ HDA_CODEC_VOLUME("Input Playback Volume", 0x15, 0x0, HDA_OUTPUT),
+ HDA_CODEC_MUTE("Input Playback Switch", 0x15, 0x0, HDA_OUTPUT),
+ HDA_CODEC_VOLUME("CD Playback Volume", 0x15, 0x0, HDA_INPUT),
+ HDA_CODEC_MUTE("CD Playback Switch", 0x15, 0x0, HDA_INPUT),
+ HDA_CODEC_VOLUME("Line Playback Volume", 0x15, 0x02, HDA_INPUT),
+ HDA_CODEC_MUTE("Line Playback Switch", 0x15, 0x02, HDA_INPUT),
+ HDA_CODEC_VOLUME("Mic Playback Volume", 0x15, 0x01, HDA_INPUT),
+ HDA_CODEC_MUTE("Mic Playback Switch", 0x15, 0x01, HDA_INPUT),
+ HDA_CODEC_MUTE("Front Mic Playback Switch", 0x10, 0x01, HDA_OUTPUT),
+ HDA_CODEC_MUTE("Headphone Playback Switch", 0x1a, 0x03, HDA_OUTPUT), /* was HDA_INPUT (why?) */
+
+ /* Capture mixer control */
+ HDA_CODEC_VOLUME("Capture Volume", 0x08, 0x0, HDA_INPUT),
+ HDA_CODEC_MUTE("Capture Switch", 0x08, 0x0, HDA_INPUT),
+ {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "Capture Source",
+ .count = 1,
+ .info = alc_mux_enum_info,
+ .get = alc_mux_enum_get,
+ .put = alc_mux_enum_put,
+ },
+ {
+ .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
+ .name = "Channel Mode",
+ .info = alc_ch_mode_info,
+ .get = alc_ch_mode_get,
+ .put = alc_ch_mode_put,
+ .private_value = ARRAY_SIZE(alc861_asus_modes),
+ },
+ { }
+};
+
/*
* generic initialization of ADC, input mixers and output mixers
@@ -6979,6 +7061,68 @@
{ }
};
+static struct hda_verb alc861_asus_init_verbs[] = {
+ /*
+ * Unmute ADC0 and set the default input to mic-in
+ */
+ /* port-A for surround (rear panel) | according to codec#0 this is the HP jack*/
+ { 0x0e, AC_VERB_SET_PIN_WIDGET_CONTROL, 0xc0 }, /* was 0x00 */
+ /* route front PCM to HP */
+ { 0x0e, AC_VERB_SET_CONNECT_SEL, 0x01 },
+ /* port-B for mic-in (rear panel) with vref */
+ { 0x0d, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24 },
+ /* port-C for line-in (rear panel) */
+ { 0x0c, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20 },
+ /* port-D for Front */
+ { 0x0b, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40 },
+ { 0x0b, AC_VERB_SET_CONNECT_SEL, 0x00 },
+ /* port-E for HP out (front panel) */
+ { 0x0f, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24 }, /* this has to be set to VREF80 */
+ /* route front PCM to HP */
+ { 0x0f, AC_VERB_SET_CONNECT_SEL, 0x01 },
+ /* port-F for mic-in (front panel) with vref */
+ { 0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x24 },
+ /* port-G for CLFE (rear panel) */
+ { 0x1f, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40 },
+ /* port-H for side (rear panel) */
+ { 0x20, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40 },
+ /* CD-in */
+ { 0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, 0x20 },
+ /* route front mic to ADC1*/
+ {0x08, AC_VERB_SET_CONNECT_SEL, 0x00},
+ {0x08, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ /* Unmute DAC0~3 & spdif out*/
+ {0x03, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x04, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x05, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x06, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ {0x07, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_UNMUTE},
+ /* Unmute Mixer 14 (mic) 1c (Line in)*/
+ {0x014, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x014, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ {0x01c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x01c, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+
+ /* Unmute Stereo Mixer 15 */
+ {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ {0x15, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
+ {0x15, AC_VERB_SET_AMP_GAIN_MUTE, 0xb00c }, /* Output 0~12 step */
+
+ {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x16, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(0)},
+ {0x19, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(1)},
+ {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(3)}, /* hp used DAC 3 (Front) */
+ {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_UNMUTE(2)},
+ { }
+};
+
+
/*
* generic initialization of ADC, input mixers and output mixers
*/
@@ -7350,10 +7494,13 @@
{ .pci_subvendor = 0x1584, .pci_subdevice = 0x9072,
.config = ALC861_UNIWILL_M31 },
{ .modelname = "toshiba", .config = ALC861_TOSHIBA },
- { .pci_subvendor = 0x1043, .pci_subdevice = 0x1338,
- .config = ALC861_TOSHIBA },
{ .pci_subvendor = 0x1179, .pci_subdevice = 0xff10,
.config = ALC861_TOSHIBA },
+ { .modelname = "asus", .config = ALC861_ASUS},
+ { .pci_subvendor = 0x1043, .pci_subdevice = 0x1393,
+ .config = ALC861_ASUS },
+ { .pci_subvendor = 0x1043, .pci_subdevice = 0x1338,
+ .config = ALC861_ASUS },
{ .modelname = "auto", .config = ALC861_AUTO },
{}
};
@@ -7434,6 +7581,20 @@
.unsol_event = alc861_toshiba_unsol_event,
.init_hook = alc861_toshiba_automute,
},
+ [ALC861_ASUS] = {
+ .mixers = { alc861_asus_mixer },
+ .init_verbs = { alc861_asus_init_verbs },
+ .num_dacs = ARRAY_SIZE(alc861_dac_nids),
+ .dac_nids = alc861_dac_nids,
+ .dig_out_nid = ALC861_DIGOUT_NID,
+ .num_channel_mode = ARRAY_SIZE(alc861_asus_modes),
+ .channel_mode = alc861_asus_modes,
+ .need_dac_fix = 1,
+ .hp_nid = 0x06,
+ .num_adc_nids = ARRAY_SIZE(alc861_adc_nids),
+ .adc_nids = alc861_adc_nids,
+ .input_mux = &alc861_capture_source,
+ },
};
[-- Attachment #3: ALSA-Configuration.txt.patch --]
[-- Type: application/octet-stream, Size: 374 bytes --]
--- ALSA-Configuration.txt 2006-10-20 20:58:05.000000000 +0200
+++ alsa-kernel/Documentation/ALSA-Configuration.txt 2006-10-20 21:21:54.000000000 +0200
@@ -836,6 +836,7 @@
3stack-660 3-jack (for ALC660)
uniwill-m31 Uniwill M31 laptop
toshiba Toshiba laptop support
+ asus Asus laptop support
auto auto-config reading BIOS (default)
CMI9880
[-- Attachment #4: Type: text/plain, Size: 373 bytes --]
-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
[-- Attachment #5: Type: text/plain, Size: 161 bytes --]
_______________________________________________
Alsa-devel mailing list
Alsa-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/alsa-devel
next prev parent reply other threads:[~2006-10-20 20:21 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-10-08 20:10 [PATCH] Asus A6RP and ALC861 headphones problem solved mariook
2006-10-09 13:31 ` Takashi Iwai
2006-10-11 16:36 ` mariook
2006-10-11 16:45 ` Takashi Iwai
2006-10-17 18:56 ` Takashi Iwai
2006-10-19 22:10 ` mariook
2006-10-19 23:39 ` Tobin Davis
2006-10-20 13:33 ` Takashi Iwai
2006-10-20 20:21 ` mariook [this message]
2006-10-23 12:11 ` Takashi Iwai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='003801c6f485$4ef87010$83030a54@MIREK' \
--to=mariook@wp.pl \
--cc=alsa-devel@lists.sourceforge.net \
--cc=tdavis@dsl-only.net \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox