From: <mariook@wp.pl>
To: Takashi Iwai <tiwai@suse.de>
Cc: alsa-devel@lists.sourceforge.net
Subject: Re: [PATCH] Asus A6RP and ALC861 headphones problem solved
Date: Wed, 11 Oct 2006 18:36:02 +0200 [thread overview]
Message-ID: <015701c6ed53$575da060$83030a54@MIREK> (raw)
In-Reply-To: s5hlknpr4y0.wl%tiwai@suse.de
[-- Attachment #1: Type: text/plain, Size: 2416 bytes --]
----- Original Message -----
From: "Takashi Iwai" <tiwai@suse.de>
To: <mariook@wp.pl>
Cc: <alsa-devel@lists.sourceforge.net>
Sent: Monday, October 09, 2006 3:31 PM
Subject: Re: [Alsa-devel] [PATCH] Asus A6RP and ALC861 headphones problem
solved
> At Sun, 8 Oct 2006 22:10:02 +0200,
> <mariook@wp.pl> wrote:
>>
>> Hi!
>>
>> I finally made it, now can use headphones with my laptop :)
>>
>> My last thread (started on 23 Sep 20:08) about my problem is quite long,
>> so
>> I decided to make a new one with result of my work - patched
>> patch_realtek.c
>> file.
>>
>> The patch I posted least time was good. The only thing that had to be
>> changed is to remove this line:
>> .need_dac_fix = 1,
>> from alc861_presets. With this line of code the patch doesn't want to
>> work.
>
> This implies that the headphone jack is connected to another DAC, most
> likely the side one (0x04). The right fix would to add .hp_nid = 0x04
> in the preset table. If 0x04 doesn't work, try 0x05 or 0x06 instead.
.hp_nid = 0x06 worked (as I understood it's surround nid - I wrote earlier
that in my case hp jack is surr-out (0x09))
>> There is only one thing that I'm not sure...
>> When channel mode is changed to 6ch the sound is in built-in speakers,
>> line-in jack and mic jack, but not in hp jack (of course when i plug
>> something to hp jack the sound in built-in speakers disappears). Is that
>> correct?
Even with fix described above this is still a problem - when channel mode is
set to 6ch the sound in hp jack is not present (the surround output goes to
line-in jack, there is also clfe output in mic jack and no output is in hp
jack).
>> Because each time I make a patch file it doesn't want to work (I make it
>> with this command: diff -Nuar old.file new.file), I'm sending in
>> attachment
>> compressed patch_realtek.c file (I patched final version 1.0.13 of
>> patch_realtek.c). The only important changes are those connected with
>> asus-a6rp model, please ignore changes made in parts of code connected
>> with
>> other models.
>
> Oh no, please send a patch instead. Otherwise we cannot review and
> check your changes.
>
> What do you mean "it doesn't want to work"? If you changed a single
> file, you can just create a diff for that file, simply by
> diff -u orig-alsa-kernel/pci/hda/patch_realtek.c \
> new-alsa-kernel/pci/hda/patch_realtek.c
Ok, patch is in the attachment :)
> Takashi
Mariusz
[-- Attachment #2: asus-a6rp.patch.tar.bz2 --]
[-- Type: application/octet-stream, Size: 2151 bytes --]
[-- Attachment #3: Type: text/plain, Size: 373 bytes --]
-------------------------------------------------------------------------
Using Tomcat but need to do more? Need to support web services, security?
Get stuff done quickly with pre-integrated technology to make your job easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642
[-- Attachment #4: Type: text/plain, Size: 161 bytes --]
_______________________________________________
Alsa-devel mailing list
Alsa-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/alsa-devel
next prev parent reply other threads:[~2006-10-11 16:36 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-10-08 20:10 [PATCH] Asus A6RP and ALC861 headphones problem solved mariook
2006-10-09 13:31 ` Takashi Iwai
2006-10-11 16:36 ` mariook [this message]
2006-10-11 16:45 ` Takashi Iwai
2006-10-17 18:56 ` Takashi Iwai
2006-10-19 22:10 ` mariook
2006-10-19 23:39 ` Tobin Davis
2006-10-20 13:33 ` Takashi Iwai
2006-10-20 20:21 ` mariook
2006-10-23 12:11 ` Takashi Iwai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='015701c6ed53$575da060$83030a54@MIREK' \
--to=mariook@wp.pl \
--cc=alsa-devel@lists.sourceforge.net \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox