Alsa-Devel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Mark Brown <broonie@opensource.wolfsonmicro.com>
To: Takashi Iwai <tiwai@suse.de>
Cc: Karl Beldan <karl.beldan@gmail.com>,
	alsa-devel@alsa-project.org,
	Mark Brown <broonie@opensource.wolfsonmicro.com>
Subject: [PATCH 03/10] ASoC: ssm2602: Fix priv substreams refs
Date: Fri, 21 Nov 2008 14:48:26 +0000	[thread overview]
Message-ID: <1227278913-25313-3-git-send-email-broonie@opensource.wolfsonmicro.com> (raw)
In-Reply-To: <1227278913-25313-2-git-send-email-broonie@opensource.wolfsonmicro.com>

From: Karl Beldan <karl.beldan@gmail.com>

Clean up our record of the active streams in shutdown(), fixing
subsequent failures of snd_pcm_hw_constraints_complete after closure of
a stream.

NOTE:
- The ssm2602 allows pairs of non-matching PB/REC rates.
- This is a fix for less evil:
  The logic is flawed (e.g. the slave might startup before the
  master's rate and sample_bits are set).

Signed-off-by: Karl Beldan <karl.beldan@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
 sound/soc/codecs/ssm2602.c |   18 ++++++++++++++++++
 1 files changed, 18 insertions(+), 0 deletions(-)

diff --git a/sound/soc/codecs/ssm2602.c b/sound/soc/codecs/ssm2602.c
index 44ef0da..0e522e7 100644
--- a/sound/soc/codecs/ssm2602.c
+++ b/sound/soc/codecs/ssm2602.c
@@ -292,9 +292,15 @@ static int ssm2602_hw_params(struct snd_pcm_substream *substream,
 	struct snd_soc_device *socdev = rtd->socdev;
 	struct snd_soc_codec *codec = socdev->codec;
 	struct ssm2602_priv *ssm2602 = codec->private_data;
+	struct i2c_client *i2c = codec->control_data;
 	u16 iface = ssm2602_read_reg_cache(codec, SSM2602_IFACE) & 0xfff3;
 	int i = get_coeff(ssm2602->sysclk, params_rate(params));
 
+	if (substream == ssm2602->slave_substream) {
+		dev_dbg(&i2c->dev, "Ignoring hw_params for slave substream\n");
+		return 0;
+	}
+
 	/*no match is found*/
 	if (i == ARRAY_SIZE(coeff_div))
 		return -EINVAL;
@@ -330,13 +336,19 @@ static int ssm2602_startup(struct snd_pcm_substream *substream)
 	struct snd_soc_device *socdev = rtd->socdev;
 	struct snd_soc_codec *codec = socdev->codec;
 	struct ssm2602_priv *ssm2602 = codec->private_data;
+	struct i2c_client *i2c = codec->control_data;
 	struct snd_pcm_runtime *master_runtime;
 
 	/* The DAI has shared clocks so if we already have a playback or
 	 * capture going then constrain this substream to match it.
+	 * TODO: the ssm2602 allows pairs of non-matching PB/REC rates
 	 */
 	if (ssm2602->master_substream) {
 		master_runtime = ssm2602->master_substream->runtime;
+		dev_dbg(&i2c->dev, "Constraining to %d bits at %dHz\n",
+			master_runtime->sample_bits,
+			master_runtime->rate);
+
 		snd_pcm_hw_constraint_minmax(substream->runtime,
 					     SNDRV_PCM_HW_PARAM_RATE,
 					     master_runtime->rate,
@@ -370,9 +382,15 @@ static void ssm2602_shutdown(struct snd_pcm_substream *substream)
 	struct snd_soc_pcm_runtime *rtd = substream->private_data;
 	struct snd_soc_device *socdev = rtd->socdev;
 	struct snd_soc_codec *codec = socdev->codec;
+	struct ssm2602_priv *ssm2602 = codec->private_data;
 	/* deactivate */
 	if (!codec->active)
 		ssm2602_write(codec, SSM2602_ACTIVE, 0);
+
+	if (ssm2602->master_substream == substream)
+		ssm2602->master_substream = ssm2602->slave_substream;
+
+	ssm2602->slave_substream = NULL;
 }
 
 static int ssm2602_mute(struct snd_soc_dai *dai, int mute)
-- 
1.5.6.5

  reply	other threads:[~2008-11-21 14:48 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-11-21 14:47 [PATCH 0/10] ASoC updates Mark Brown
2008-11-21 14:48 ` [PATCH 01/10] ASoC: Rename snd_soc_card to snd_soc_machine Mark Brown
2008-11-21 14:48   ` [PATCH 02/10] ASoC: Add abbreviation to maintainers for searchability Mark Brown
2008-11-21 14:48     ` Mark Brown [this message]
2008-11-21 14:48       ` [PATCH 04/10] ASoC: ssm2602: Update supported stream formats Mark Brown
2008-11-21 14:48         ` [PATCH 05/10] ASoC: Move DAI structure definitions into new soc-dai.h Mark Brown
2008-11-21 14:48           ` [PATCH 06/10] ASoC: Merge snd_soc_ops into snd_soc_dai_ops Mark Brown
2008-11-21 14:48             ` [PATCH 07/10] ASoC: Add Marvell Zylonite machine support Mark Brown
2008-11-21 14:48               ` [PATCH 08/10] ASoC: OMAP: Fix preprocessor filled DAI name in McBSP DAI Mark Brown
2008-11-21 14:48                 ` [PATCH 09/10] ASoC: Staticise pxa2xx_pcm_ops Mark Brown
2008-11-21 14:48                   ` [PATCH 10/10] ASoC: Improve error reporting for AC97 reset failures Mark Brown
2008-11-21 14:55   ` [PATCH 01/10] ASoC: Rename snd_soc_card to snd_soc_machine Takashi Iwai
2008-11-21 15:02     ` Mark Brown
2008-11-21 15:04       ` Takashi Iwai
2008-11-21 15:05         ` Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1227278913-25313-3-git-send-email-broonie@opensource.wolfsonmicro.com \
    --to=broonie@opensource.wolfsonmicro.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=karl.beldan@gmail.com \
    --cc=tiwai@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox