From: Daniel Mack <zonque@gmail.com>
To: broonie@kernel.org
Cc: alsa-devel@alsa-project.org, Daniel Mack <zonque@gmail.com>
Subject: [PATCH 1/3 v2] ASoC: ak5386: add regulator consumer support
Date: Thu, 27 Mar 2014 21:42:14 +0100 [thread overview]
Message-ID: <1395952936-10670-1-git-send-email-zonque@gmail.com> (raw)
The chip has two power supplies, VA and VDD. Enable them both as long
as the codec is in use.
Signed-off-by: Daniel Mack <zonque@gmail.com>
---
sound/soc/codecs/ak5386.c | 50 +++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 50 insertions(+)
diff --git a/sound/soc/codecs/ak5386.c b/sound/soc/codecs/ak5386.c
index 72e953b..a30be5c 100644
--- a/sound/soc/codecs/ak5386.c
+++ b/sound/soc/codecs/ak5386.c
@@ -14,12 +14,18 @@
#include <linux/of.h>
#include <linux/of_gpio.h>
#include <linux/of_device.h>
+#include <linux/regulator/consumer.h>
#include <sound/soc.h>
#include <sound/pcm.h>
#include <sound/initval.h>
+static const char const *supply_names[] = {
+ "va", "vd"
+};
+
struct ak5386_priv {
int reset_gpio;
+ struct regulator_bulk_data supplies[ARRAY_SIZE(supply_names)];
};
static const struct snd_soc_dapm_widget ak5386_dapm_widgets[] = {
@@ -32,7 +38,42 @@ static const struct snd_soc_dapm_route ak5386_dapm_routes[] = {
{ "Capture", NULL, "AINR" },
};
+static int ak5386_soc_probe(struct snd_soc_codec *codec)
+{
+ struct ak5386_priv *priv = snd_soc_codec_get_drvdata(codec);
+ return regulator_bulk_enable(ARRAY_SIZE(priv->supplies), priv->supplies);
+}
+
+static int ak5386_soc_remove(struct snd_soc_codec *codec)
+{
+ struct ak5386_priv *priv = snd_soc_codec_get_drvdata(codec);
+ regulator_bulk_disable(ARRAY_SIZE(priv->supplies), priv->supplies);
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int ak5386_soc_suspend(struct snd_soc_codec *codec)
+{
+ struct ak5386_priv *priv = snd_soc_codec_get_drvdata(codec);
+ regulator_bulk_disable(ARRAY_SIZE(priv->supplies), priv->supplies);
+ return 0;
+}
+
+static int ak5386_soc_resume(struct snd_soc_codec *codec)
+{
+ struct ak5386_priv *priv = snd_soc_codec_get_drvdata(codec);
+ return regulator_bulk_enable(ARRAY_SIZE(priv->supplies), priv->supplies);
+}
+#else
+#define ak5386_soc_suspend NULL
+#define ak5386_soc_resume NULL
+#endif /* CONFIG_PM */
+
static struct snd_soc_codec_driver soc_codec_ak5386 = {
+ .probe = ak5386_soc_probe,
+ .remove = ak5386_soc_remove,
+ .suspend = ak5386_soc_suspend,
+ .resume = ak5386_soc_resume,
.dapm_widgets = ak5386_dapm_widgets,
.num_dapm_widgets = ARRAY_SIZE(ak5386_dapm_widgets),
.dapm_routes = ak5386_dapm_routes,
@@ -122,6 +163,7 @@ static int ak5386_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct ak5386_priv *priv;
+ int ret, i;
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
@@ -130,6 +172,14 @@ static int ak5386_probe(struct platform_device *pdev)
priv->reset_gpio = -EINVAL;
dev_set_drvdata(dev, priv);
+ for (i = 0; i < ARRAY_SIZE(supply_names); i++)
+ priv->supplies[i].supply = supply_names[i];
+
+ ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(priv->supplies),
+ priv->supplies);
+ if (ret < 0)
+ return ret;
+
if (of_match_device(of_match_ptr(ak5386_dt_ids), dev))
priv->reset_gpio = of_get_named_gpio(dev->of_node,
"reset-gpio", 0);
--
1.8.5.3
next reply other threads:[~2014-03-27 20:42 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2014-03-27 20:42 Daniel Mack [this message]
2014-03-27 20:42 ` [PATCH 2/3 v2] ASoC: ak4104: add regulator consumer support Daniel Mack
2014-03-28 11:23 ` Mark Brown
2014-03-28 11:27 ` Daniel Mack
2014-03-28 11:53 ` Mark Brown
2014-03-27 20:42 ` [PATCH 3/3 v2] ASoC: tas5086: " Daniel Mack
2014-03-28 11:35 ` Mark Brown
2014-03-28 11:40 ` Daniel Mack
2014-03-28 11:52 ` Mark Brown
2014-03-28 11:21 ` [PATCH 1/3 v2] ASoC: ak5386: " Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1395952936-10670-1-git-send-email-zonque@gmail.com \
--to=zonque@gmail.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox