* [PATCH v2] ARM: OMAP1: Prepare for conversion of OMAP1 clocks to CCF [not found] <20220310233307.99220-3-jmkrzyszt@gmail.com> @ 2022-03-21 21:54 ` Janusz Krzysztofik 2022-03-22 12:02 ` Mark Brown ` (2 more replies) 0 siblings, 3 replies; 10+ messages in thread From: Janusz Krzysztofik @ 2022-03-21 21:54 UTC (permalink / raw) To: Tony Lindgren Cc: alsa-devel, Felipe Balbi, Paul Walmsley, Liam Girdwood, Arnd Bergmann, Aaro Koskinen, Greg Kroah-Hartman, Helge Deller, linux-usb, linux-mmc, linux-fbdev, linux-kernel, Janusz Krzysztofik, Mark Brown, Alan Stern, Ulf Hansson, linux-omap, Peter Ujfalusi, linux-arm-kernel In preparation for conversion of OMAP1 clocks to common clock framework, identify users of those clocks which don't call clk_prepare/unprepare() and update them to call clk_prepare_enable/clk_disable_unprepare() instead of just clk_enable/disable(), as required by CCF implementation of clock API. v2: update still a few more OMAP specific drivers missed in v1, - call clk_prepare/unprepare() just after/before clk_get/put() where it can make more sense than merging prepare/unprepare with enable/disable. Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> --- arch/arm/mach-omap1/mcbsp.c | 8 ++++---- arch/arm/mach-omap1/ocpi.c | 4 ++-- arch/arm/mach-omap1/serial.c | 6 +++--- arch/arm/mach-omap1/timer32k.c | 2 +- drivers/mmc/host/omap.c | 23 ++++++++++++++--------- drivers/usb/gadget/udc/omap_udc.c | 14 ++++++++------ drivers/usb/host/ohci-omap.c | 18 ++++++++++++++++-- drivers/video/fbdev/omap/hwa742.c | 6 +++--- drivers/video/fbdev/omap/lcdc.c | 6 +++--- drivers/video/fbdev/omap/sossi.c | 5 +++-- sound/soc/ti/osk5912.c | 9 ++++++++- 11 files changed, 65 insertions(+), 36 deletions(-) diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c index f36c34f47f11..3ec2badff6af 100644 --- a/arch/arm/mach-omap1/mcbsp.c +++ b/arch/arm/mach-omap1/mcbsp.c @@ -44,8 +44,8 @@ static void omap1_mcbsp_request(unsigned int id) api_clk = clk_get(NULL, "api_ck"); dsp_clk = clk_get(NULL, "dsp_ck"); if (!IS_ERR(api_clk) && !IS_ERR(dsp_clk)) { - clk_enable(api_clk); - clk_enable(dsp_clk); + clk_prepare_enable(api_clk); + clk_prepare_enable(dsp_clk); /* * DSP external peripheral reset @@ -63,11 +63,11 @@ static void omap1_mcbsp_free(unsigned int id) if (id == 0 || id == 2) { if (--dsp_use == 0) { if (!IS_ERR(api_clk)) { - clk_disable(api_clk); + clk_disable_unprepare(api_clk); clk_put(api_clk); } if (!IS_ERR(dsp_clk)) { - clk_disable(dsp_clk); + clk_disable_unprepare(dsp_clk); clk_put(dsp_clk); } } diff --git a/arch/arm/mach-omap1/ocpi.c b/arch/arm/mach-omap1/ocpi.c index 380ea2de58c1..03cc48024fd6 100644 --- a/arch/arm/mach-omap1/ocpi.c +++ b/arch/arm/mach-omap1/ocpi.c @@ -73,7 +73,7 @@ static int __init omap_ocpi_init(void) if (IS_ERR(ocpi_ck)) return PTR_ERR(ocpi_ck); - clk_enable(ocpi_ck); + clk_prepare_enable(ocpi_ck); ocpi_enable(); pr_info("OMAP OCPI interconnect driver loaded\n"); @@ -87,7 +87,7 @@ static void __exit omap_ocpi_exit(void) if (!cpu_is_omap16xx()) return; - clk_disable(ocpi_ck); + clk_disable_unprepare(ocpi_ck); clk_put(ocpi_ck); } diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c index 9eb591fbfd89..5f591a836ab5 100644 --- a/arch/arm/mach-omap1/serial.c +++ b/arch/arm/mach-omap1/serial.c @@ -141,7 +141,7 @@ void __init omap_serial_init(void) if (IS_ERR(uart1_ck)) printk("Could not get uart1_ck\n"); else { - clk_enable(uart1_ck); + clk_prepare_enable(uart1_ck); if (cpu_is_omap15xx()) clk_set_rate(uart1_ck, 12000000); } @@ -151,7 +151,7 @@ void __init omap_serial_init(void) if (IS_ERR(uart2_ck)) printk("Could not get uart2_ck\n"); else { - clk_enable(uart2_ck); + clk_prepare_enable(uart2_ck); if (cpu_is_omap15xx()) clk_set_rate(uart2_ck, 12000000); else @@ -163,7 +163,7 @@ void __init omap_serial_init(void) if (IS_ERR(uart3_ck)) printk("Could not get uart3_ck\n"); else { - clk_enable(uart3_ck); + clk_prepare_enable(uart3_ck); if (cpu_is_omap15xx()) clk_set_rate(uart3_ck, 12000000); } diff --git a/arch/arm/mach-omap1/timer32k.c b/arch/arm/mach-omap1/timer32k.c index 780fdf03c3ce..049c7b7f28c4 100644 --- a/arch/arm/mach-omap1/timer32k.c +++ b/arch/arm/mach-omap1/timer32k.c @@ -180,7 +180,7 @@ int __init omap_32k_timer_init(void) sync32k_ick = clk_get(NULL, "omap_32ksync_ick"); if (!IS_ERR(sync32k_ick)) - clk_enable(sync32k_ick); + clk_prepare_enable(sync32k_ick); ret = omap_init_clocksource_32k(base); } diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c index 5e5af34090f1..57d39283924d 100644 --- a/drivers/mmc/host/omap.c +++ b/drivers/mmc/host/omap.c @@ -1374,7 +1374,7 @@ static int mmc_omap_probe(struct platform_device *pdev) host->iclk = clk_get(&pdev->dev, "ick"); if (IS_ERR(host->iclk)) return PTR_ERR(host->iclk); - clk_enable(host->iclk); + clk_prepare_enable(host->iclk); host->fclk = clk_get(&pdev->dev, "fck"); if (IS_ERR(host->fclk)) { @@ -1382,16 +1382,18 @@ static int mmc_omap_probe(struct platform_device *pdev) goto err_free_iclk; } + ret = clk_prepare(host->fclk); + if (ret) + goto err_put_fclk; + host->dma_tx_burst = -1; host->dma_rx_burst = -1; host->dma_tx = dma_request_chan(&pdev->dev, "tx"); if (IS_ERR(host->dma_tx)) { ret = PTR_ERR(host->dma_tx); - if (ret == -EPROBE_DEFER) { - clk_put(host->fclk); - goto err_free_iclk; - } + if (ret == -EPROBE_DEFER) + goto err_free_fclk; host->dma_tx = NULL; dev_warn(host->dev, "TX DMA channel request failed\n"); @@ -1403,8 +1405,7 @@ static int mmc_omap_probe(struct platform_device *pdev) if (ret == -EPROBE_DEFER) { if (host->dma_tx) dma_release_channel(host->dma_tx); - clk_put(host->fclk); - goto err_free_iclk; + goto err_free_fclk; } host->dma_rx = NULL; @@ -1454,9 +1455,12 @@ static int mmc_omap_probe(struct platform_device *pdev) dma_release_channel(host->dma_tx); if (host->dma_rx) dma_release_channel(host->dma_rx); +err_free_fclk: + clk_unprepare(host->fclk); +err_put_fclk: clk_put(host->fclk); err_free_iclk: - clk_disable(host->iclk); + clk_disable_unprepare(host->iclk); clk_put(host->iclk); return ret; } @@ -1476,8 +1480,9 @@ static int mmc_omap_remove(struct platform_device *pdev) mmc_omap_fclk_enable(host, 0); free_irq(host->irq, host); + clk_unprepare(host->fclk); clk_put(host->fclk); - clk_disable(host->iclk); + clk_disable_unprepare(host->iclk); clk_put(host->iclk); if (host->dma_tx) diff --git a/drivers/usb/gadget/udc/omap_udc.c b/drivers/usb/gadget/udc/omap_udc.c index 494da00398d7..8768a3280e19 100644 --- a/drivers/usb/gadget/udc/omap_udc.c +++ b/drivers/usb/gadget/udc/omap_udc.c @@ -2604,6 +2604,8 @@ static void omap_udc_release(struct device *dev) if (udc->dc_clk) { if (udc->clk_requested) omap_udc_enable_clock(0); + clk_unprepare(udc->hhc_clk); + clk_unprepare(udc->dc_clk); clk_put(udc->hhc_clk); clk_put(udc->dc_clk); } @@ -2768,8 +2770,8 @@ static int omap_udc_probe(struct platform_device *pdev) hhc_clk = clk_get(&pdev->dev, "usb_hhc_ck"); BUG_ON(IS_ERR(dc_clk) || IS_ERR(hhc_clk)); /* can't use omap_udc_enable_clock yet */ - clk_enable(dc_clk); - clk_enable(hhc_clk); + clk_prepare_enable(dc_clk); + clk_prepare_enable(hhc_clk); udelay(100); } @@ -2778,8 +2780,8 @@ static int omap_udc_probe(struct platform_device *pdev) hhc_clk = clk_get(&pdev->dev, "l3_ocpi_ck"); BUG_ON(IS_ERR(dc_clk) || IS_ERR(hhc_clk)); /* can't use omap_udc_enable_clock yet */ - clk_enable(dc_clk); - clk_enable(hhc_clk); + clk_prepare_enable(dc_clk); + clk_prepare_enable(hhc_clk); udelay(100); } @@ -2927,8 +2929,8 @@ static int omap_udc_probe(struct platform_device *pdev) usb_put_phy(xceiv); if (cpu_is_omap16xx() || cpu_is_omap7xx()) { - clk_disable(hhc_clk); - clk_disable(dc_clk); + clk_disable_unprepare(hhc_clk); + clk_disable_unprepare(dc_clk); clk_put(hhc_clk); clk_put(dc_clk); } diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c index 45dcf8292072..2ab2e089a2b7 100644 --- a/drivers/usb/host/ohci-omap.c +++ b/drivers/usb/host/ohci-omap.c @@ -281,6 +281,10 @@ static int ohci_hcd_omap_probe(struct platform_device *pdev) goto err_put_hcd; } + retval = clk_prepare(priv->usb_host_ck); + if (retval) + goto err_put_host_ck; + if (!cpu_is_omap15xx()) priv->usb_dc_ck = clk_get(&pdev->dev, "usb_dc_ck"); else @@ -288,13 +292,17 @@ static int ohci_hcd_omap_probe(struct platform_device *pdev) if (IS_ERR(priv->usb_dc_ck)) { retval = PTR_ERR(priv->usb_dc_ck); - goto err_put_host_ck; + goto err_unprepare_host_ck; } + retval = clk_prepare(priv->usb_dc_ck); + if (retval) + goto err_put_dc_ck; + if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { dev_dbg(&pdev->dev, "request_mem_region failed\n"); retval = -EBUSY; - goto err_put_dc_ck; + goto err_unprepare_dc_ck; } hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); @@ -319,8 +327,12 @@ static int ohci_hcd_omap_probe(struct platform_device *pdev) iounmap(hcd->regs); err2: release_mem_region(hcd->rsrc_start, hcd->rsrc_len); +err_unprepare_dc_ck: + clk_unprepare(priv->usb_dc_ck); err_put_dc_ck: clk_put(priv->usb_dc_ck); +err_unprepare_host_ck: + clk_unprepare(priv->usb_host_ck); err_put_host_ck: clk_put(priv->usb_host_ck); err_put_hcd: @@ -355,7 +367,9 @@ static int ohci_hcd_omap_remove(struct platform_device *pdev) } iounmap(hcd->regs); release_mem_region(hcd->rsrc_start, hcd->rsrc_len); + clk_unprepare(priv->usb_dc_ck); clk_put(priv->usb_dc_ck); + clk_unprepare(priv->usb_host_ck); clk_put(priv->usb_host_ck); usb_put_hcd(hcd); return 0; diff --git a/drivers/video/fbdev/omap/hwa742.c b/drivers/video/fbdev/omap/hwa742.c index b191bef22d98..9d9fe5c3a7a1 100644 --- a/drivers/video/fbdev/omap/hwa742.c +++ b/drivers/video/fbdev/omap/hwa742.c @@ -964,7 +964,7 @@ static int hwa742_init(struct omapfb_device *fbdev, int ext_mode, if ((r = calc_extif_timings(ext_clk, &extif_mem_div)) < 0) goto err3; hwa742.extif->set_timings(&hwa742.reg_timings); - clk_enable(hwa742.sys_ck); + clk_prepare_enable(hwa742.sys_ck); calc_hwa742_clk_rates(ext_clk, &sys_clk, &pix_clk); if ((r = calc_extif_timings(sys_clk, &extif_mem_div)) < 0) @@ -1023,7 +1023,7 @@ static int hwa742_init(struct omapfb_device *fbdev, int ext_mode, return 0; err4: - clk_disable(hwa742.sys_ck); + clk_disable_unprepare(hwa742.sys_ck); err3: hwa742.extif->cleanup(); err2: @@ -1037,7 +1037,7 @@ static void hwa742_cleanup(void) hwa742_set_update_mode(OMAPFB_UPDATE_DISABLED); hwa742.extif->cleanup(); hwa742.int_ctrl->cleanup(); - clk_disable(hwa742.sys_ck); + clk_disable_unprepare(hwa742.sys_ck); } struct lcd_ctrl hwa742_ctrl = { diff --git a/drivers/video/fbdev/omap/lcdc.c b/drivers/video/fbdev/omap/lcdc.c index 7317c9aad677..97d20dc0d1d0 100644 --- a/drivers/video/fbdev/omap/lcdc.c +++ b/drivers/video/fbdev/omap/lcdc.c @@ -711,7 +711,7 @@ static int omap_lcdc_init(struct omapfb_device *fbdev, int ext_mode, dev_err(fbdev->dev, "failed to adjust LCD rate\n"); goto fail1; } - clk_enable(lcdc.lcd_ck); + clk_prepare_enable(lcdc.lcd_ck); r = request_irq(OMAP_LCDC_IRQ, lcdc_irq_handler, 0, MODULE_NAME, fbdev); if (r) { @@ -746,7 +746,7 @@ static int omap_lcdc_init(struct omapfb_device *fbdev, int ext_mode, fail3: free_irq(OMAP_LCDC_IRQ, lcdc.fbdev); fail2: - clk_disable(lcdc.lcd_ck); + clk_disable_unprepare(lcdc.lcd_ck); fail1: clk_put(lcdc.lcd_ck); fail0: @@ -760,7 +760,7 @@ static void omap_lcdc_cleanup(void) free_fbmem(); omap_free_lcd_dma(); free_irq(OMAP_LCDC_IRQ, lcdc.fbdev); - clk_disable(lcdc.lcd_ck); + clk_disable_unprepare(lcdc.lcd_ck); clk_put(lcdc.lcd_ck); } diff --git a/drivers/video/fbdev/omap/sossi.c b/drivers/video/fbdev/omap/sossi.c index 80ac67f27f0d..b9cb8b386627 100644 --- a/drivers/video/fbdev/omap/sossi.c +++ b/drivers/video/fbdev/omap/sossi.c @@ -598,7 +598,7 @@ static int sossi_init(struct omapfb_device *fbdev) l &= ~CONF_SOSSI_RESET_R; omap_writel(l, MOD_CONF_CTRL_1); - clk_enable(sossi.fck); + clk_prepare_enable(sossi.fck); l = omap_readl(ARM_IDLECT2); l &= ~(1 << 8); /* DMACK_REQ */ omap_writel(l, ARM_IDLECT2); @@ -649,7 +649,7 @@ static int sossi_init(struct omapfb_device *fbdev) return 0; err: - clk_disable(sossi.fck); + clk_disable_unprepare(sossi.fck); clk_put(sossi.fck); return r; } @@ -657,6 +657,7 @@ static int sossi_init(struct omapfb_device *fbdev) static void sossi_cleanup(void) { omap_lcdc_free_dma_callback(); + clk_unprepare(sossi.fck); clk_put(sossi.fck); iounmap(sossi.base); } diff --git a/sound/soc/ti/osk5912.c b/sound/soc/ti/osk5912.c index 40e29dda7e7a..22da3b335e81 100644 --- a/sound/soc/ti/osk5912.c +++ b/sound/soc/ti/osk5912.c @@ -134,6 +134,10 @@ static int __init osk_soc_init(void) goto err2; } + err = clk_prepare(tlv320aic23_mclk); + if (err) + goto err3; + /* * Configure 12 MHz output on MCLK. */ @@ -142,7 +146,7 @@ static int __init osk_soc_init(void) if (clk_set_rate(tlv320aic23_mclk, CODEC_CLOCK)) { printk(KERN_ERR "Cannot set MCLK for AIC23 CODEC\n"); err = -ECANCELED; - goto err3; + goto err4; } } @@ -151,6 +155,8 @@ static int __init osk_soc_init(void) return 0; +err4: + clk_unprepare(tlv320aic23_mclk); err3: clk_put(tlv320aic23_mclk); err2: @@ -164,6 +170,7 @@ static int __init osk_soc_init(void) static void __exit osk_soc_exit(void) { + clk_unprepare(tlv320aic23_mclk); clk_put(tlv320aic23_mclk); platform_device_unregister(osk_snd_device); } -- 2.35.1 ^ permalink raw reply related [flat|nested] 10+ messages in thread
* Re: [PATCH v2] ARM: OMAP1: Prepare for conversion of OMAP1 clocks to CCF 2022-03-21 21:54 ` [PATCH v2] ARM: OMAP1: Prepare for conversion of OMAP1 clocks to CCF Janusz Krzysztofik @ 2022-03-22 12:02 ` Mark Brown 2022-03-22 16:36 ` Aaro Koskinen 2022-03-31 9:19 ` Ulf Hansson 2 siblings, 0 replies; 10+ messages in thread From: Mark Brown @ 2022-03-22 12:02 UTC (permalink / raw) To: Janusz Krzysztofik Cc: alsa-devel, Felipe Balbi, Paul Walmsley, Liam Girdwood, Arnd Bergmann, Aaro Koskinen, Tony Lindgren, Greg Kroah-Hartman, Helge Deller, linux-usb, linux-mmc, linux-fbdev, linux-kernel, Alan Stern, Ulf Hansson, linux-omap, Peter Ujfalusi, linux-arm-kernel [-- Attachment #1: Type: text/plain, Size: 419 bytes --] On Mon, Mar 21, 2022 at 10:54:16PM +0100, Janusz Krzysztofik wrote: > In preparation for conversion of OMAP1 clocks to common clock framework, > identify users of those clocks which don't call clk_prepare/unprepare() > and update them to call clk_prepare_enable/clk_disable_unprepare() instead > of just clk_enable/disable(), as required by CCF implementation of clock > API. Acked-by: Mark Brown <broonie@kernel.org> [-- Attachment #2: signature.asc --] [-- Type: application/pgp-signature, Size: 488 bytes --] ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH v2] ARM: OMAP1: Prepare for conversion of OMAP1 clocks to CCF 2022-03-21 21:54 ` [PATCH v2] ARM: OMAP1: Prepare for conversion of OMAP1 clocks to CCF Janusz Krzysztofik 2022-03-22 12:02 ` Mark Brown @ 2022-03-22 16:36 ` Aaro Koskinen 2022-03-22 19:07 ` Aaro Koskinen 2022-03-31 9:19 ` Ulf Hansson 2 siblings, 1 reply; 10+ messages in thread From: Aaro Koskinen @ 2022-03-22 16:36 UTC (permalink / raw) To: Janusz Krzysztofik Cc: alsa-devel, Felipe Balbi, Paul Walmsley, Arnd Bergmann, Liam Girdwood, Tony Lindgren, Greg Kroah-Hartman, Helge Deller, linux-usb, linux-mmc, linux-fbdev, linux-kernel, Mark Brown, Alan Stern, Ulf Hansson, linux-omap, Peter Ujfalusi, linux-arm-kernel Hi, On Mon, Mar 21, 2022 at 10:54:16PM +0100, Janusz Krzysztofik wrote: > In preparation for conversion of OMAP1 clocks to common clock framework, > identify users of those clocks which don't call clk_prepare/unprepare() > and update them to call clk_prepare_enable/clk_disable_unprepare() instead > of just clk_enable/disable(), as required by CCF implementation of clock > API. > > v2: update still a few more OMAP specific drivers missed in v1, > - call clk_prepare/unprepare() just after/before clk_get/put() where it > can make more sense than merging prepare/unprepare with enable/disable. Something is still broken. When doing kexec (using CCF kernel), the kexec'ed kernel now hangs early (on 770): [ 0.853912] MUX: initialized W4_USB_PUEN [ 0.858001] MUX: initialized V6_USB0_TXD [ 0.862060] MUX: initialized W5_USB0_SE0 [ 0.866210] MUX: initialized Y5_USB0_RCV [ 0.870269] MUX: initialized AA9_USB0_VP [ 0.874389] MUX: initialized R9_USB0_VM [ 0.878356] USB: hmc 16, usb0 6 wires (dev), Mini-AB on usb0 [ 0.886230] initcall customize_machine+0x0/0x30 returned 0 after 29296 usecs [ 0.893707] calling init_atags_procfs+0x0/0xe8 @ 1 [ 0.898864] initcall init_atags_procfs+0x0/0xe8 returned 0 after 0 usecs [ 0.905883] calling exceptions_init+0x0/0x8c @ 1 [ 0.910797] initcall exceptions_init+0x0/0x8c returned 0 after 0 usecs [ 0.917602] calling omap_init+0x0/0xc @ 1 [ 0.922393] initcall omap_init+0x0/0xc returned 0 after 9765 usecs [ 0.928863] calling omap1_init_devices+0x0/0x2c @ 1 [ 2.568664] random: fast init done Probably something is now disabled that has been previously always enabled by default/bootloader. I'll try adding some printk()s to see the exact place where it hangs... A. ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH v2] ARM: OMAP1: Prepare for conversion of OMAP1 clocks to CCF 2022-03-22 16:36 ` Aaro Koskinen @ 2022-03-22 19:07 ` Aaro Koskinen 2022-03-26 21:17 ` Janusz Krzysztofik 0 siblings, 1 reply; 10+ messages in thread From: Aaro Koskinen @ 2022-03-22 19:07 UTC (permalink / raw) To: Janusz Krzysztofik Cc: alsa-devel, Felipe Balbi, Paul Walmsley, Arnd Bergmann, Liam Girdwood, Tony Lindgren, Greg Kroah-Hartman, Helge Deller, linux-usb, linux-mmc, linux-fbdev, linux-kernel, Mark Brown, Alan Stern, Ulf Hansson, linux-omap, Peter Ujfalusi, linux-arm-kernel Hi, On Tue, Mar 22, 2022 at 06:36:48PM +0200, Aaro Koskinen wrote: > On Mon, Mar 21, 2022 at 10:54:16PM +0100, Janusz Krzysztofik wrote: > > In preparation for conversion of OMAP1 clocks to common clock framework, > > identify users of those clocks which don't call clk_prepare/unprepare() > > and update them to call clk_prepare_enable/clk_disable_unprepare() instead > > of just clk_enable/disable(), as required by CCF implementation of clock > > API. > > > > v2: update still a few more OMAP specific drivers missed in v1, > > - call clk_prepare/unprepare() just after/before clk_get/put() where it > > can make more sense than merging prepare/unprepare with enable/disable. > > Something is still broken. When doing kexec (using CCF kernel), the > kexec'ed kernel now hangs early (on 770): [...] > [ 0.928863] calling omap1_init_devices+0x0/0x2c @ 1 It hangs in omap_sram_reprogram_clock() (<- omap1_select_table_rate() <- omap1_clk_late_init()). A. ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH v2] ARM: OMAP1: Prepare for conversion of OMAP1 clocks to CCF 2022-03-22 19:07 ` Aaro Koskinen @ 2022-03-26 21:17 ` Janusz Krzysztofik 2022-04-06 13:21 ` Aaro Koskinen 0 siblings, 1 reply; 10+ messages in thread From: Janusz Krzysztofik @ 2022-03-26 21:17 UTC (permalink / raw) To: Aaro Koskinen Cc: alsa-devel, Felipe Balbi, Paul Walmsley, Arnd Bergmann, Liam Girdwood, Tony Lindgren, Greg Kroah-Hartman, Helge Deller, linux-usb, linux-mmc, linux-fbdev, linux-kernel, Mark Brown, Alan Stern, Ulf Hansson, linux-omap, Peter Ujfalusi, linux-arm-kernel Hi Aaro, Dnia wtorek, 22 marca 2022 20:07:53 CET Aaro Koskinen pisze: > Hi, > > On Tue, Mar 22, 2022 at 06:36:48PM +0200, Aaro Koskinen wrote: > > On Mon, Mar 21, 2022 at 10:54:16PM +0100, Janusz Krzysztofik wrote: > > > In preparation for conversion of OMAP1 clocks to common clock framework, > > > identify users of those clocks which don't call clk_prepare/unprepare() > > > and update them to call clk_prepare_enable/clk_disable_unprepare() instead > > > of just clk_enable/disable(), as required by CCF implementation of clock > > > API. > > > > > > v2: update still a few more OMAP specific drivers missed in v1, > > > - call clk_prepare/unprepare() just after/before clk_get/put() where it > > > can make more sense than merging prepare/unprepare with enable/disable. > > > > Something is still broken. When doing kexec (using CCF kernel), the > > kexec'ed kernel now hangs early (on 770): > [...] > > [ 0.928863] calling omap1_init_devices+0x0/0x2c @ 1 > > It hangs in omap_sram_reprogram_clock() (<- omap1_select_table_rate() > <- omap1_clk_late_init()). I've reviewed my changes but haven't found anything suspicious. Could you please provide: - dmesg from both cold start and kexec, both non-CCF and CCF version, - contents of /sys/kernel/debug/clock/summary (non-CCF) after boot/kexec, - contents of /sys/kernel/debug/clk/clk_summary (CCF) after boot? Thanks, Janusz > > A. > ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH v2] ARM: OMAP1: Prepare for conversion of OMAP1 clocks to CCF 2022-03-26 21:17 ` Janusz Krzysztofik @ 2022-04-06 13:21 ` Aaro Koskinen 2022-04-06 18:48 ` Janusz Krzysztofik 0 siblings, 1 reply; 10+ messages in thread From: Aaro Koskinen @ 2022-04-06 13:21 UTC (permalink / raw) To: Janusz Krzysztofik Cc: alsa-devel, Felipe Balbi, Paul Walmsley, Arnd Bergmann, Liam Girdwood, Tony Lindgren, Greg Kroah-Hartman, Helge Deller, linux-usb, linux-mmc, linux-fbdev, linux-kernel, Mark Brown, Alan Stern, Ulf Hansson, linux-omap, Peter Ujfalusi, linux-arm-kernel Hi, On Sat, Mar 26, 2022 at 10:17:49PM +0100, Janusz Krzysztofik wrote: > Dnia wtorek, 22 marca 2022 20:07:53 CET Aaro Koskinen pisze: > > On Tue, Mar 22, 2022 at 06:36:48PM +0200, Aaro Koskinen wrote: > > > Something is still broken. When doing kexec (using CCF kernel), the > > > kexec'ed kernel now hangs early (on 770): > > [...] > > > [ 0.928863] calling omap1_init_devices+0x0/0x2c @ 1 > > > > It hangs in omap_sram_reprogram_clock() (<- omap1_select_table_rate() > > <- omap1_clk_late_init()). > > I've reviewed my changes but haven't found anything suspicious. The below change is fixing the kexec boot. Based on the comment in the code, it seems this clock is needed for the SRAM to work. diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c index e33e11f826af..b8b4876ff935 100644 --- a/arch/arm/mach-omap1/clock_data.c +++ b/arch/arm/mach-omap1/clock_data.c @@ -285,7 +285,7 @@ static struct omap1_clk tc1_ck = { */ static struct omap1_clk tc2_ck = { - .hw.init = CLK_HW_INIT("tc2_ck", "tc_ck", &omap1_clk_gate_ops, 0), + .hw.init = CLK_HW_INIT("tc2_ck", "tc_ck", &omap1_clk_gate_ops, CLK_IS_CRITICAL), .ops = &clkops_generic, .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT3), .enable_bit = EN_TC2_CK, A. ^ permalink raw reply related [flat|nested] 10+ messages in thread
* Re: [PATCH v2] ARM: OMAP1: Prepare for conversion of OMAP1 clocks to CCF 2022-04-06 13:21 ` Aaro Koskinen @ 2022-04-06 18:48 ` Janusz Krzysztofik 2022-04-06 20:00 ` Aaro Koskinen 0 siblings, 1 reply; 10+ messages in thread From: Janusz Krzysztofik @ 2022-04-06 18:48 UTC (permalink / raw) To: Aaro Koskinen Cc: alsa-devel, Felipe Balbi, Paul Walmsley, Arnd Bergmann, Liam Girdwood, Tony Lindgren, Greg Kroah-Hartman, Helge Deller, linux-usb, linux-mmc, linux-fbdev, linux-kernel, Mark Brown, Alan Stern, Ulf Hansson, linux-omap, Peter Ujfalusi, linux-arm-kernel Dnia środa, 6 kwietnia 2022 15:21:49 CEST Aaro Koskinen pisze: > Hi, > > On Sat, Mar 26, 2022 at 10:17:49PM +0100, Janusz Krzysztofik wrote: > > Dnia wtorek, 22 marca 2022 20:07:53 CET Aaro Koskinen pisze: > > > On Tue, Mar 22, 2022 at 06:36:48PM +0200, Aaro Koskinen wrote: > > > > Something is still broken. When doing kexec (using CCF kernel), the > > > > kexec'ed kernel now hangs early (on 770): > > > [...] > > > > [ 0.928863] calling omap1_init_devices+0x0/0x2c @ 1 > > > > > > It hangs in omap_sram_reprogram_clock() (<- omap1_select_table_rate() > > > <- omap1_clk_late_init()). > > > > I've reviewed my changes but haven't found anything suspicious. > > The below change is fixing the kexec boot. Based on the comment in the > code, it seems this clock is needed for the SRAM to work. > > diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c > index e33e11f826af..b8b4876ff935 100644 > --- a/arch/arm/mach-omap1/clock_data.c > +++ b/arch/arm/mach-omap1/clock_data.c > @@ -285,7 +285,7 @@ static struct omap1_clk tc1_ck = { > */ > > static struct omap1_clk tc2_ck = { > - .hw.init = CLK_HW_INIT("tc2_ck", "tc_ck", &omap1_clk_gate_ops, 0), > + .hw.init = CLK_HW_INIT("tc2_ck", "tc_ck", &omap1_clk_gate_ops, CLK_IS_CRITICAL), > .ops = &clkops_generic, > .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT3), > .enable_bit = EN_TC2_CK, > > A. > Thank you Aaro. Will you submit this as a separate fix, or should I submit v2 of my patch 4/4 with your fix included? Thanks, Janusz ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH v2] ARM: OMAP1: Prepare for conversion of OMAP1 clocks to CCF 2022-04-06 18:48 ` Janusz Krzysztofik @ 2022-04-06 20:00 ` Aaro Koskinen 0 siblings, 0 replies; 10+ messages in thread From: Aaro Koskinen @ 2022-04-06 20:00 UTC (permalink / raw) To: Janusz Krzysztofik Cc: alsa-devel, Felipe Balbi, Paul Walmsley, Arnd Bergmann, Liam Girdwood, Tony Lindgren, Greg Kroah-Hartman, Helge Deller, linux-usb, linux-mmc, linux-fbdev, linux-kernel, Mark Brown, Alan Stern, Ulf Hansson, linux-omap, Peter Ujfalusi, linux-arm-kernel Hi, On Wed, Apr 06, 2022 at 08:48:14PM +0200, Janusz Krzysztofik wrote: > Dnia środa, 6 kwietnia 2022 15:21:49 CEST Aaro Koskinen pisze: > > On Sat, Mar 26, 2022 at 10:17:49PM +0100, Janusz Krzysztofik wrote: > > > Dnia wtorek, 22 marca 2022 20:07:53 CET Aaro Koskinen pisze: > > > > On Tue, Mar 22, 2022 at 06:36:48PM +0200, Aaro Koskinen wrote: > > > > > Something is still broken. When doing kexec (using CCF kernel), the > > > > > kexec'ed kernel now hangs early (on 770): > > > > [...] > > > > > [ 0.928863] calling omap1_init_devices+0x0/0x2c @ 1 > > > > > > > > It hangs in omap_sram_reprogram_clock() (<- omap1_select_table_rate() > > > > <- omap1_clk_late_init()). > > > > > > I've reviewed my changes but haven't found anything suspicious. > > > > The below change is fixing the kexec boot. Based on the comment in the > > code, it seems this clock is needed for the SRAM to work. > > > > diff --git a/arch/arm/mach-omap1/clock_data.c b/arch/arm/mach-omap1/clock_data.c > > index e33e11f826af..b8b4876ff935 100644 > > --- a/arch/arm/mach-omap1/clock_data.c > > +++ b/arch/arm/mach-omap1/clock_data.c > > @@ -285,7 +285,7 @@ static struct omap1_clk tc1_ck = { > > */ > > > > static struct omap1_clk tc2_ck = { > > - .hw.init = CLK_HW_INIT("tc2_ck", "tc_ck", &omap1_clk_gate_ops, 0), > > + .hw.init = CLK_HW_INIT("tc2_ck", "tc_ck", &omap1_clk_gate_ops, CLK_IS_CRITICAL), > > .ops = &clkops_generic, > > .enable_reg = OMAP1_IO_ADDRESS(ARM_IDLECT3), > > .enable_bit = EN_TC2_CK, > > > > A. > > > > Thank you Aaro. Will you submit this as a separate fix, or should I submit > v2 of my patch 4/4 with your fix included? Please send a new version with the fix included. A. ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH v2] ARM: OMAP1: Prepare for conversion of OMAP1 clocks to CCF 2022-03-21 21:54 ` [PATCH v2] ARM: OMAP1: Prepare for conversion of OMAP1 clocks to CCF Janusz Krzysztofik 2022-03-22 12:02 ` Mark Brown 2022-03-22 16:36 ` Aaro Koskinen @ 2022-03-31 9:19 ` Ulf Hansson 2022-03-31 18:29 ` Janusz Krzysztofik 2 siblings, 1 reply; 10+ messages in thread From: Ulf Hansson @ 2022-03-31 9:19 UTC (permalink / raw) To: Janusz Krzysztofik Cc: alsa-devel, Felipe Balbi, Paul Walmsley, Liam Girdwood, Arnd Bergmann, Aaro Koskinen, Tony Lindgren, Greg Kroah-Hartman, Helge Deller, linux-usb, linux-mmc, linux-fbdev, linux-kernel, Mark Brown, Alan Stern, linux-omap, Peter Ujfalusi, linux-arm-kernel On Mon, 21 Mar 2022 at 22:54, Janusz Krzysztofik <jmkrzyszt@gmail.com> wrote: > > In preparation for conversion of OMAP1 clocks to common clock framework, > identify users of those clocks which don't call clk_prepare/unprepare() > and update them to call clk_prepare_enable/clk_disable_unprepare() instead > of just clk_enable/disable(), as required by CCF implementation of clock > API. > > v2: update still a few more OMAP specific drivers missed in v1, > - call clk_prepare/unprepare() just after/before clk_get/put() where it > can make more sense than merging prepare/unprepare with enable/disable. > > Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Is there a specific reason why you can't split this into a per subsystem patch? Don't get me wrong, if you need my ack you have it, but I just wanted to know why this is? Kind regards Uffe > --- > arch/arm/mach-omap1/mcbsp.c | 8 ++++---- > arch/arm/mach-omap1/ocpi.c | 4 ++-- > arch/arm/mach-omap1/serial.c | 6 +++--- > arch/arm/mach-omap1/timer32k.c | 2 +- > drivers/mmc/host/omap.c | 23 ++++++++++++++--------- > drivers/usb/gadget/udc/omap_udc.c | 14 ++++++++------ > drivers/usb/host/ohci-omap.c | 18 ++++++++++++++++-- > drivers/video/fbdev/omap/hwa742.c | 6 +++--- > drivers/video/fbdev/omap/lcdc.c | 6 +++--- > drivers/video/fbdev/omap/sossi.c | 5 +++-- > sound/soc/ti/osk5912.c | 9 ++++++++- > 11 files changed, 65 insertions(+), 36 deletions(-) > > diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c > index f36c34f47f11..3ec2badff6af 100644 > --- a/arch/arm/mach-omap1/mcbsp.c > +++ b/arch/arm/mach-omap1/mcbsp.c > @@ -44,8 +44,8 @@ static void omap1_mcbsp_request(unsigned int id) > api_clk = clk_get(NULL, "api_ck"); > dsp_clk = clk_get(NULL, "dsp_ck"); > if (!IS_ERR(api_clk) && !IS_ERR(dsp_clk)) { > - clk_enable(api_clk); > - clk_enable(dsp_clk); > + clk_prepare_enable(api_clk); > + clk_prepare_enable(dsp_clk); > > /* > * DSP external peripheral reset > @@ -63,11 +63,11 @@ static void omap1_mcbsp_free(unsigned int id) > if (id == 0 || id == 2) { > if (--dsp_use == 0) { > if (!IS_ERR(api_clk)) { > - clk_disable(api_clk); > + clk_disable_unprepare(api_clk); > clk_put(api_clk); > } > if (!IS_ERR(dsp_clk)) { > - clk_disable(dsp_clk); > + clk_disable_unprepare(dsp_clk); > clk_put(dsp_clk); > } > } > diff --git a/arch/arm/mach-omap1/ocpi.c b/arch/arm/mach-omap1/ocpi.c > index 380ea2de58c1..03cc48024fd6 100644 > --- a/arch/arm/mach-omap1/ocpi.c > +++ b/arch/arm/mach-omap1/ocpi.c > @@ -73,7 +73,7 @@ static int __init omap_ocpi_init(void) > if (IS_ERR(ocpi_ck)) > return PTR_ERR(ocpi_ck); > > - clk_enable(ocpi_ck); > + clk_prepare_enable(ocpi_ck); > ocpi_enable(); > pr_info("OMAP OCPI interconnect driver loaded\n"); > > @@ -87,7 +87,7 @@ static void __exit omap_ocpi_exit(void) > if (!cpu_is_omap16xx()) > return; > > - clk_disable(ocpi_ck); > + clk_disable_unprepare(ocpi_ck); > clk_put(ocpi_ck); > } > > diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c > index 9eb591fbfd89..5f591a836ab5 100644 > --- a/arch/arm/mach-omap1/serial.c > +++ b/arch/arm/mach-omap1/serial.c > @@ -141,7 +141,7 @@ void __init omap_serial_init(void) > if (IS_ERR(uart1_ck)) > printk("Could not get uart1_ck\n"); > else { > - clk_enable(uart1_ck); > + clk_prepare_enable(uart1_ck); > if (cpu_is_omap15xx()) > clk_set_rate(uart1_ck, 12000000); > } > @@ -151,7 +151,7 @@ void __init omap_serial_init(void) > if (IS_ERR(uart2_ck)) > printk("Could not get uart2_ck\n"); > else { > - clk_enable(uart2_ck); > + clk_prepare_enable(uart2_ck); > if (cpu_is_omap15xx()) > clk_set_rate(uart2_ck, 12000000); > else > @@ -163,7 +163,7 @@ void __init omap_serial_init(void) > if (IS_ERR(uart3_ck)) > printk("Could not get uart3_ck\n"); > else { > - clk_enable(uart3_ck); > + clk_prepare_enable(uart3_ck); > if (cpu_is_omap15xx()) > clk_set_rate(uart3_ck, 12000000); > } > diff --git a/arch/arm/mach-omap1/timer32k.c b/arch/arm/mach-omap1/timer32k.c > index 780fdf03c3ce..049c7b7f28c4 100644 > --- a/arch/arm/mach-omap1/timer32k.c > +++ b/arch/arm/mach-omap1/timer32k.c > @@ -180,7 +180,7 @@ int __init omap_32k_timer_init(void) > > sync32k_ick = clk_get(NULL, "omap_32ksync_ick"); > if (!IS_ERR(sync32k_ick)) > - clk_enable(sync32k_ick); > + clk_prepare_enable(sync32k_ick); > > ret = omap_init_clocksource_32k(base); > } > diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c > index 5e5af34090f1..57d39283924d 100644 > --- a/drivers/mmc/host/omap.c > +++ b/drivers/mmc/host/omap.c > @@ -1374,7 +1374,7 @@ static int mmc_omap_probe(struct platform_device *pdev) > host->iclk = clk_get(&pdev->dev, "ick"); > if (IS_ERR(host->iclk)) > return PTR_ERR(host->iclk); > - clk_enable(host->iclk); > + clk_prepare_enable(host->iclk); > > host->fclk = clk_get(&pdev->dev, "fck"); > if (IS_ERR(host->fclk)) { > @@ -1382,16 +1382,18 @@ static int mmc_omap_probe(struct platform_device *pdev) > goto err_free_iclk; > } > > + ret = clk_prepare(host->fclk); > + if (ret) > + goto err_put_fclk; > + > host->dma_tx_burst = -1; > host->dma_rx_burst = -1; > > host->dma_tx = dma_request_chan(&pdev->dev, "tx"); > if (IS_ERR(host->dma_tx)) { > ret = PTR_ERR(host->dma_tx); > - if (ret == -EPROBE_DEFER) { > - clk_put(host->fclk); > - goto err_free_iclk; > - } > + if (ret == -EPROBE_DEFER) > + goto err_free_fclk; > > host->dma_tx = NULL; > dev_warn(host->dev, "TX DMA channel request failed\n"); > @@ -1403,8 +1405,7 @@ static int mmc_omap_probe(struct platform_device *pdev) > if (ret == -EPROBE_DEFER) { > if (host->dma_tx) > dma_release_channel(host->dma_tx); > - clk_put(host->fclk); > - goto err_free_iclk; > + goto err_free_fclk; > } > > host->dma_rx = NULL; > @@ -1454,9 +1455,12 @@ static int mmc_omap_probe(struct platform_device *pdev) > dma_release_channel(host->dma_tx); > if (host->dma_rx) > dma_release_channel(host->dma_rx); > +err_free_fclk: > + clk_unprepare(host->fclk); > +err_put_fclk: > clk_put(host->fclk); > err_free_iclk: > - clk_disable(host->iclk); > + clk_disable_unprepare(host->iclk); > clk_put(host->iclk); > return ret; > } > @@ -1476,8 +1480,9 @@ static int mmc_omap_remove(struct platform_device *pdev) > > mmc_omap_fclk_enable(host, 0); > free_irq(host->irq, host); > + clk_unprepare(host->fclk); > clk_put(host->fclk); > - clk_disable(host->iclk); > + clk_disable_unprepare(host->iclk); > clk_put(host->iclk); > > if (host->dma_tx) > diff --git a/drivers/usb/gadget/udc/omap_udc.c b/drivers/usb/gadget/udc/omap_udc.c > index 494da00398d7..8768a3280e19 100644 > --- a/drivers/usb/gadget/udc/omap_udc.c > +++ b/drivers/usb/gadget/udc/omap_udc.c > @@ -2604,6 +2604,8 @@ static void omap_udc_release(struct device *dev) > if (udc->dc_clk) { > if (udc->clk_requested) > omap_udc_enable_clock(0); > + clk_unprepare(udc->hhc_clk); > + clk_unprepare(udc->dc_clk); > clk_put(udc->hhc_clk); > clk_put(udc->dc_clk); > } > @@ -2768,8 +2770,8 @@ static int omap_udc_probe(struct platform_device *pdev) > hhc_clk = clk_get(&pdev->dev, "usb_hhc_ck"); > BUG_ON(IS_ERR(dc_clk) || IS_ERR(hhc_clk)); > /* can't use omap_udc_enable_clock yet */ > - clk_enable(dc_clk); > - clk_enable(hhc_clk); > + clk_prepare_enable(dc_clk); > + clk_prepare_enable(hhc_clk); > udelay(100); > } > > @@ -2778,8 +2780,8 @@ static int omap_udc_probe(struct platform_device *pdev) > hhc_clk = clk_get(&pdev->dev, "l3_ocpi_ck"); > BUG_ON(IS_ERR(dc_clk) || IS_ERR(hhc_clk)); > /* can't use omap_udc_enable_clock yet */ > - clk_enable(dc_clk); > - clk_enable(hhc_clk); > + clk_prepare_enable(dc_clk); > + clk_prepare_enable(hhc_clk); > udelay(100); > } > > @@ -2927,8 +2929,8 @@ static int omap_udc_probe(struct platform_device *pdev) > usb_put_phy(xceiv); > > if (cpu_is_omap16xx() || cpu_is_omap7xx()) { > - clk_disable(hhc_clk); > - clk_disable(dc_clk); > + clk_disable_unprepare(hhc_clk); > + clk_disable_unprepare(dc_clk); > clk_put(hhc_clk); > clk_put(dc_clk); > } > diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c > index 45dcf8292072..2ab2e089a2b7 100644 > --- a/drivers/usb/host/ohci-omap.c > +++ b/drivers/usb/host/ohci-omap.c > @@ -281,6 +281,10 @@ static int ohci_hcd_omap_probe(struct platform_device *pdev) > goto err_put_hcd; > } > > + retval = clk_prepare(priv->usb_host_ck); > + if (retval) > + goto err_put_host_ck; > + > if (!cpu_is_omap15xx()) > priv->usb_dc_ck = clk_get(&pdev->dev, "usb_dc_ck"); > else > @@ -288,13 +292,17 @@ static int ohci_hcd_omap_probe(struct platform_device *pdev) > > if (IS_ERR(priv->usb_dc_ck)) { > retval = PTR_ERR(priv->usb_dc_ck); > - goto err_put_host_ck; > + goto err_unprepare_host_ck; > } > > + retval = clk_prepare(priv->usb_dc_ck); > + if (retval) > + goto err_put_dc_ck; > + > if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { > dev_dbg(&pdev->dev, "request_mem_region failed\n"); > retval = -EBUSY; > - goto err_put_dc_ck; > + goto err_unprepare_dc_ck; > } > > hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); > @@ -319,8 +327,12 @@ static int ohci_hcd_omap_probe(struct platform_device *pdev) > iounmap(hcd->regs); > err2: > release_mem_region(hcd->rsrc_start, hcd->rsrc_len); > +err_unprepare_dc_ck: > + clk_unprepare(priv->usb_dc_ck); > err_put_dc_ck: > clk_put(priv->usb_dc_ck); > +err_unprepare_host_ck: > + clk_unprepare(priv->usb_host_ck); > err_put_host_ck: > clk_put(priv->usb_host_ck); > err_put_hcd: > @@ -355,7 +367,9 @@ static int ohci_hcd_omap_remove(struct platform_device *pdev) > } > iounmap(hcd->regs); > release_mem_region(hcd->rsrc_start, hcd->rsrc_len); > + clk_unprepare(priv->usb_dc_ck); > clk_put(priv->usb_dc_ck); > + clk_unprepare(priv->usb_host_ck); > clk_put(priv->usb_host_ck); > usb_put_hcd(hcd); > return 0; > diff --git a/drivers/video/fbdev/omap/hwa742.c b/drivers/video/fbdev/omap/hwa742.c > index b191bef22d98..9d9fe5c3a7a1 100644 > --- a/drivers/video/fbdev/omap/hwa742.c > +++ b/drivers/video/fbdev/omap/hwa742.c > @@ -964,7 +964,7 @@ static int hwa742_init(struct omapfb_device *fbdev, int ext_mode, > if ((r = calc_extif_timings(ext_clk, &extif_mem_div)) < 0) > goto err3; > hwa742.extif->set_timings(&hwa742.reg_timings); > - clk_enable(hwa742.sys_ck); > + clk_prepare_enable(hwa742.sys_ck); > > calc_hwa742_clk_rates(ext_clk, &sys_clk, &pix_clk); > if ((r = calc_extif_timings(sys_clk, &extif_mem_div)) < 0) > @@ -1023,7 +1023,7 @@ static int hwa742_init(struct omapfb_device *fbdev, int ext_mode, > > return 0; > err4: > - clk_disable(hwa742.sys_ck); > + clk_disable_unprepare(hwa742.sys_ck); > err3: > hwa742.extif->cleanup(); > err2: > @@ -1037,7 +1037,7 @@ static void hwa742_cleanup(void) > hwa742_set_update_mode(OMAPFB_UPDATE_DISABLED); > hwa742.extif->cleanup(); > hwa742.int_ctrl->cleanup(); > - clk_disable(hwa742.sys_ck); > + clk_disable_unprepare(hwa742.sys_ck); > } > > struct lcd_ctrl hwa742_ctrl = { > diff --git a/drivers/video/fbdev/omap/lcdc.c b/drivers/video/fbdev/omap/lcdc.c > index 7317c9aad677..97d20dc0d1d0 100644 > --- a/drivers/video/fbdev/omap/lcdc.c > +++ b/drivers/video/fbdev/omap/lcdc.c > @@ -711,7 +711,7 @@ static int omap_lcdc_init(struct omapfb_device *fbdev, int ext_mode, > dev_err(fbdev->dev, "failed to adjust LCD rate\n"); > goto fail1; > } > - clk_enable(lcdc.lcd_ck); > + clk_prepare_enable(lcdc.lcd_ck); > > r = request_irq(OMAP_LCDC_IRQ, lcdc_irq_handler, 0, MODULE_NAME, fbdev); > if (r) { > @@ -746,7 +746,7 @@ static int omap_lcdc_init(struct omapfb_device *fbdev, int ext_mode, > fail3: > free_irq(OMAP_LCDC_IRQ, lcdc.fbdev); > fail2: > - clk_disable(lcdc.lcd_ck); > + clk_disable_unprepare(lcdc.lcd_ck); > fail1: > clk_put(lcdc.lcd_ck); > fail0: > @@ -760,7 +760,7 @@ static void omap_lcdc_cleanup(void) > free_fbmem(); > omap_free_lcd_dma(); > free_irq(OMAP_LCDC_IRQ, lcdc.fbdev); > - clk_disable(lcdc.lcd_ck); > + clk_disable_unprepare(lcdc.lcd_ck); > clk_put(lcdc.lcd_ck); > } > > diff --git a/drivers/video/fbdev/omap/sossi.c b/drivers/video/fbdev/omap/sossi.c > index 80ac67f27f0d..b9cb8b386627 100644 > --- a/drivers/video/fbdev/omap/sossi.c > +++ b/drivers/video/fbdev/omap/sossi.c > @@ -598,7 +598,7 @@ static int sossi_init(struct omapfb_device *fbdev) > l &= ~CONF_SOSSI_RESET_R; > omap_writel(l, MOD_CONF_CTRL_1); > > - clk_enable(sossi.fck); > + clk_prepare_enable(sossi.fck); > l = omap_readl(ARM_IDLECT2); > l &= ~(1 << 8); /* DMACK_REQ */ > omap_writel(l, ARM_IDLECT2); > @@ -649,7 +649,7 @@ static int sossi_init(struct omapfb_device *fbdev) > return 0; > > err: > - clk_disable(sossi.fck); > + clk_disable_unprepare(sossi.fck); > clk_put(sossi.fck); > return r; > } > @@ -657,6 +657,7 @@ static int sossi_init(struct omapfb_device *fbdev) > static void sossi_cleanup(void) > { > omap_lcdc_free_dma_callback(); > + clk_unprepare(sossi.fck); > clk_put(sossi.fck); > iounmap(sossi.base); > } > diff --git a/sound/soc/ti/osk5912.c b/sound/soc/ti/osk5912.c > index 40e29dda7e7a..22da3b335e81 100644 > --- a/sound/soc/ti/osk5912.c > +++ b/sound/soc/ti/osk5912.c > @@ -134,6 +134,10 @@ static int __init osk_soc_init(void) > goto err2; > } > > + err = clk_prepare(tlv320aic23_mclk); > + if (err) > + goto err3; > + > /* > * Configure 12 MHz output on MCLK. > */ > @@ -142,7 +146,7 @@ static int __init osk_soc_init(void) > if (clk_set_rate(tlv320aic23_mclk, CODEC_CLOCK)) { > printk(KERN_ERR "Cannot set MCLK for AIC23 CODEC\n"); > err = -ECANCELED; > - goto err3; > + goto err4; > } > } > > @@ -151,6 +155,8 @@ static int __init osk_soc_init(void) > > return 0; > > +err4: > + clk_unprepare(tlv320aic23_mclk); > err3: > clk_put(tlv320aic23_mclk); > err2: > @@ -164,6 +170,7 @@ static int __init osk_soc_init(void) > > static void __exit osk_soc_exit(void) > { > + clk_unprepare(tlv320aic23_mclk); > clk_put(tlv320aic23_mclk); > platform_device_unregister(osk_snd_device); > } > -- > 2.35.1 > ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: [PATCH v2] ARM: OMAP1: Prepare for conversion of OMAP1 clocks to CCF 2022-03-31 9:19 ` Ulf Hansson @ 2022-03-31 18:29 ` Janusz Krzysztofik 0 siblings, 0 replies; 10+ messages in thread From: Janusz Krzysztofik @ 2022-03-31 18:29 UTC (permalink / raw) To: Ulf Hansson Cc: alsa-devel, Felipe Balbi, Paul Walmsley, Liam Girdwood, Arnd Bergmann, Aaro Koskinen, Tony Lindgren, Greg Kroah-Hartman, Helge Deller, linux-usb, linux-mmc, linux-fbdev, linux-kernel, Janusz Krzysztofik, Mark Brown, Alan Stern, linux-omap, Peter Ujfalusi, linux-arm-kernel Hi Uffe, On Thursday, 31 March 2022 11:19:43 CEST Ulf Hansson wrote: > On Mon, 21 Mar 2022 at 22:54, Janusz Krzysztofik <jmkrzyszt@gmail.com> wrote: > > > > In preparation for conversion of OMAP1 clocks to common clock framework, > > identify users of those clocks which don't call clk_prepare/unprepare() > > and update them to call clk_prepare_enable/clk_disable_unprepare() instead > > of just clk_enable/disable(), as required by CCF implementation of clock > > API. > > > > v2: update still a few more OMAP specific drivers missed in v1, > > - call clk_prepare/unprepare() just after/before clk_get/put() where it > > can make more sense than merging prepare/unprepare with enable/disable. > > > > Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> > > Is there a specific reason why you can't split this into a per subsystem patch? > > Don't get me wrong, if you need my ack you have it, but I just wanted > to know why this is? There is no specific reason, I just didn't think of that, and indeed, that is perfectly possible and will be more easy to handle. Please expect a separate patch for each subsystem soon. Thanks, Janusz > > Kind regards > Uffe > > > --- > > arch/arm/mach-omap1/mcbsp.c | 8 ++++---- > > arch/arm/mach-omap1/ocpi.c | 4 ++-- > > arch/arm/mach-omap1/serial.c | 6 +++--- > > arch/arm/mach-omap1/timer32k.c | 2 +- > > drivers/mmc/host/omap.c | 23 ++++++++++++++--------- > > drivers/usb/gadget/udc/omap_udc.c | 14 ++++++++------ > > drivers/usb/host/ohci-omap.c | 18 ++++++++++++++++-- > > drivers/video/fbdev/omap/hwa742.c | 6 +++--- > > drivers/video/fbdev/omap/lcdc.c | 6 +++--- > > drivers/video/fbdev/omap/sossi.c | 5 +++-- > > sound/soc/ti/osk5912.c | 9 ++++++++- > > 11 files changed, 65 insertions(+), 36 deletions(-) > > > > diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c > > index f36c34f47f11..3ec2badff6af 100644 > > --- a/arch/arm/mach-omap1/mcbsp.c > > +++ b/arch/arm/mach-omap1/mcbsp.c > > @@ -44,8 +44,8 @@ static void omap1_mcbsp_request(unsigned int id) > > api_clk = clk_get(NULL, "api_ck"); > > dsp_clk = clk_get(NULL, "dsp_ck"); > > if (!IS_ERR(api_clk) && !IS_ERR(dsp_clk)) { > > - clk_enable(api_clk); > > - clk_enable(dsp_clk); > > + clk_prepare_enable(api_clk); > > + clk_prepare_enable(dsp_clk); > > > > /* > > * DSP external peripheral reset > > @@ -63,11 +63,11 @@ static void omap1_mcbsp_free(unsigned int id) > > if (id == 0 || id == 2) { > > if (--dsp_use == 0) { > > if (!IS_ERR(api_clk)) { > > - clk_disable(api_clk); > > + clk_disable_unprepare(api_clk); > > clk_put(api_clk); > > } > > if (!IS_ERR(dsp_clk)) { > > - clk_disable(dsp_clk); > > + clk_disable_unprepare(dsp_clk); > > clk_put(dsp_clk); > > } > > } > > diff --git a/arch/arm/mach-omap1/ocpi.c b/arch/arm/mach-omap1/ocpi.c > > index 380ea2de58c1..03cc48024fd6 100644 > > --- a/arch/arm/mach-omap1/ocpi.c > > +++ b/arch/arm/mach-omap1/ocpi.c > > @@ -73,7 +73,7 @@ static int __init omap_ocpi_init(void) > > if (IS_ERR(ocpi_ck)) > > return PTR_ERR(ocpi_ck); > > > > - clk_enable(ocpi_ck); > > + clk_prepare_enable(ocpi_ck); > > ocpi_enable(); > > pr_info("OMAP OCPI interconnect driver loaded\n"); > > > > @@ -87,7 +87,7 @@ static void __exit omap_ocpi_exit(void) > > if (!cpu_is_omap16xx()) > > return; > > > > - clk_disable(ocpi_ck); > > + clk_disable_unprepare(ocpi_ck); > > clk_put(ocpi_ck); > > } > > > > diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c > > index 9eb591fbfd89..5f591a836ab5 100644 > > --- a/arch/arm/mach-omap1/serial.c > > +++ b/arch/arm/mach-omap1/serial.c > > @@ -141,7 +141,7 @@ void __init omap_serial_init(void) > > if (IS_ERR(uart1_ck)) > > printk("Could not get uart1_ck\n"); > > else { > > - clk_enable(uart1_ck); > > + clk_prepare_enable(uart1_ck); > > if (cpu_is_omap15xx()) > > clk_set_rate(uart1_ck, 12000000); > > } > > @@ -151,7 +151,7 @@ void __init omap_serial_init(void) > > if (IS_ERR(uart2_ck)) > > printk("Could not get uart2_ck\n"); > > else { > > - clk_enable(uart2_ck); > > + clk_prepare_enable(uart2_ck); > > if (cpu_is_omap15xx()) > > clk_set_rate(uart2_ck, 12000000); > > else > > @@ -163,7 +163,7 @@ void __init omap_serial_init(void) > > if (IS_ERR(uart3_ck)) > > printk("Could not get uart3_ck\n"); > > else { > > - clk_enable(uart3_ck); > > + clk_prepare_enable(uart3_ck); > > if (cpu_is_omap15xx()) > > clk_set_rate(uart3_ck, 12000000); > > } > > diff --git a/arch/arm/mach-omap1/timer32k.c b/arch/arm/mach-omap1/timer32k.c > > index 780fdf03c3ce..049c7b7f28c4 100644 > > --- a/arch/arm/mach-omap1/timer32k.c > > +++ b/arch/arm/mach-omap1/timer32k.c > > @@ -180,7 +180,7 @@ int __init omap_32k_timer_init(void) > > > > sync32k_ick = clk_get(NULL, "omap_32ksync_ick"); > > if (!IS_ERR(sync32k_ick)) > > - clk_enable(sync32k_ick); > > + clk_prepare_enable(sync32k_ick); > > > > ret = omap_init_clocksource_32k(base); > > } > > diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c > > index 5e5af34090f1..57d39283924d 100644 > > --- a/drivers/mmc/host/omap.c > > +++ b/drivers/mmc/host/omap.c > > @@ -1374,7 +1374,7 @@ static int mmc_omap_probe(struct platform_device *pdev) > > host->iclk = clk_get(&pdev->dev, "ick"); > > if (IS_ERR(host->iclk)) > > return PTR_ERR(host->iclk); > > - clk_enable(host->iclk); > > + clk_prepare_enable(host->iclk); > > > > host->fclk = clk_get(&pdev->dev, "fck"); > > if (IS_ERR(host->fclk)) { > > @@ -1382,16 +1382,18 @@ static int mmc_omap_probe(struct platform_device *pdev) > > goto err_free_iclk; > > } > > > > + ret = clk_prepare(host->fclk); > > + if (ret) > > + goto err_put_fclk; > > + > > host->dma_tx_burst = -1; > > host->dma_rx_burst = -1; > > > > host->dma_tx = dma_request_chan(&pdev->dev, "tx"); > > if (IS_ERR(host->dma_tx)) { > > ret = PTR_ERR(host->dma_tx); > > - if (ret == -EPROBE_DEFER) { > > - clk_put(host->fclk); > > - goto err_free_iclk; > > - } > > + if (ret == -EPROBE_DEFER) > > + goto err_free_fclk; > > > > host->dma_tx = NULL; > > dev_warn(host->dev, "TX DMA channel request failed\n"); > > @@ -1403,8 +1405,7 @@ static int mmc_omap_probe(struct platform_device *pdev) > > if (ret == -EPROBE_DEFER) { > > if (host->dma_tx) > > dma_release_channel(host->dma_tx); > > - clk_put(host->fclk); > > - goto err_free_iclk; > > + goto err_free_fclk; > > } > > > > host->dma_rx = NULL; > > @@ -1454,9 +1455,12 @@ static int mmc_omap_probe(struct platform_device *pdev) > > dma_release_channel(host->dma_tx); > > if (host->dma_rx) > > dma_release_channel(host->dma_rx); > > +err_free_fclk: > > + clk_unprepare(host->fclk); > > +err_put_fclk: > > clk_put(host->fclk); > > err_free_iclk: > > - clk_disable(host->iclk); > > + clk_disable_unprepare(host->iclk); > > clk_put(host->iclk); > > return ret; > > } > > @@ -1476,8 +1480,9 @@ static int mmc_omap_remove(struct platform_device *pdev) > > > > mmc_omap_fclk_enable(host, 0); > > free_irq(host->irq, host); > > + clk_unprepare(host->fclk); > > clk_put(host->fclk); > > - clk_disable(host->iclk); > > + clk_disable_unprepare(host->iclk); > > clk_put(host->iclk); > > > > if (host->dma_tx) > > diff --git a/drivers/usb/gadget/udc/omap_udc.c b/drivers/usb/gadget/udc/omap_udc.c > > index 494da00398d7..8768a3280e19 100644 > > --- a/drivers/usb/gadget/udc/omap_udc.c > > +++ b/drivers/usb/gadget/udc/omap_udc.c > > @@ -2604,6 +2604,8 @@ static void omap_udc_release(struct device *dev) > > if (udc->dc_clk) { > > if (udc->clk_requested) > > omap_udc_enable_clock(0); > > + clk_unprepare(udc->hhc_clk); > > + clk_unprepare(udc->dc_clk); > > clk_put(udc->hhc_clk); > > clk_put(udc->dc_clk); > > } > > @@ -2768,8 +2770,8 @@ static int omap_udc_probe(struct platform_device *pdev) > > hhc_clk = clk_get(&pdev->dev, "usb_hhc_ck"); > > BUG_ON(IS_ERR(dc_clk) || IS_ERR(hhc_clk)); > > /* can't use omap_udc_enable_clock yet */ > > - clk_enable(dc_clk); > > - clk_enable(hhc_clk); > > + clk_prepare_enable(dc_clk); > > + clk_prepare_enable(hhc_clk); > > udelay(100); > > } > > > > @@ -2778,8 +2780,8 @@ static int omap_udc_probe(struct platform_device *pdev) > > hhc_clk = clk_get(&pdev->dev, "l3_ocpi_ck"); > > BUG_ON(IS_ERR(dc_clk) || IS_ERR(hhc_clk)); > > /* can't use omap_udc_enable_clock yet */ > > - clk_enable(dc_clk); > > - clk_enable(hhc_clk); > > + clk_prepare_enable(dc_clk); > > + clk_prepare_enable(hhc_clk); > > udelay(100); > > } > > > > @@ -2927,8 +2929,8 @@ static int omap_udc_probe(struct platform_device *pdev) > > usb_put_phy(xceiv); > > > > if (cpu_is_omap16xx() || cpu_is_omap7xx()) { > > - clk_disable(hhc_clk); > > - clk_disable(dc_clk); > > + clk_disable_unprepare(hhc_clk); > > + clk_disable_unprepare(dc_clk); > > clk_put(hhc_clk); > > clk_put(dc_clk); > > } > > diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c > > index 45dcf8292072..2ab2e089a2b7 100644 > > --- a/drivers/usb/host/ohci-omap.c > > +++ b/drivers/usb/host/ohci-omap.c > > @@ -281,6 +281,10 @@ static int ohci_hcd_omap_probe(struct platform_device *pdev) > > goto err_put_hcd; > > } > > > > + retval = clk_prepare(priv->usb_host_ck); > > + if (retval) > > + goto err_put_host_ck; > > + > > if (!cpu_is_omap15xx()) > > priv->usb_dc_ck = clk_get(&pdev->dev, "usb_dc_ck"); > > else > > @@ -288,13 +292,17 @@ static int ohci_hcd_omap_probe(struct platform_device *pdev) > > > > if (IS_ERR(priv->usb_dc_ck)) { > > retval = PTR_ERR(priv->usb_dc_ck); > > - goto err_put_host_ck; > > + goto err_unprepare_host_ck; > > } > > > > + retval = clk_prepare(priv->usb_dc_ck); > > + if (retval) > > + goto err_put_dc_ck; > > + > > if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { > > dev_dbg(&pdev->dev, "request_mem_region failed\n"); > > retval = -EBUSY; > > - goto err_put_dc_ck; > > + goto err_unprepare_dc_ck; > > } > > > > hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); > > @@ -319,8 +327,12 @@ static int ohci_hcd_omap_probe(struct platform_device *pdev) > > iounmap(hcd->regs); > > err2: > > release_mem_region(hcd->rsrc_start, hcd->rsrc_len); > > +err_unprepare_dc_ck: > > + clk_unprepare(priv->usb_dc_ck); > > err_put_dc_ck: > > clk_put(priv->usb_dc_ck); > > +err_unprepare_host_ck: > > + clk_unprepare(priv->usb_host_ck); > > err_put_host_ck: > > clk_put(priv->usb_host_ck); > > err_put_hcd: > > @@ -355,7 +367,9 @@ static int ohci_hcd_omap_remove(struct platform_device *pdev) > > } > > iounmap(hcd->regs); > > release_mem_region(hcd->rsrc_start, hcd->rsrc_len); > > + clk_unprepare(priv->usb_dc_ck); > > clk_put(priv->usb_dc_ck); > > + clk_unprepare(priv->usb_host_ck); > > clk_put(priv->usb_host_ck); > > usb_put_hcd(hcd); > > return 0; > > diff --git a/drivers/video/fbdev/omap/hwa742.c b/drivers/video/fbdev/omap/hwa742.c > > index b191bef22d98..9d9fe5c3a7a1 100644 > > --- a/drivers/video/fbdev/omap/hwa742.c > > +++ b/drivers/video/fbdev/omap/hwa742.c > > @@ -964,7 +964,7 @@ static int hwa742_init(struct omapfb_device *fbdev, int ext_mode, > > if ((r = calc_extif_timings(ext_clk, &extif_mem_div)) < 0) > > goto err3; > > hwa742.extif->set_timings(&hwa742.reg_timings); > > - clk_enable(hwa742.sys_ck); > > + clk_prepare_enable(hwa742.sys_ck); > > > > calc_hwa742_clk_rates(ext_clk, &sys_clk, &pix_clk); > > if ((r = calc_extif_timings(sys_clk, &extif_mem_div)) < 0) > > @@ -1023,7 +1023,7 @@ static int hwa742_init(struct omapfb_device *fbdev, int ext_mode, > > > > return 0; > > err4: > > - clk_disable(hwa742.sys_ck); > > + clk_disable_unprepare(hwa742.sys_ck); > > err3: > > hwa742.extif->cleanup(); > > err2: > > @@ -1037,7 +1037,7 @@ static void hwa742_cleanup(void) > > hwa742_set_update_mode(OMAPFB_UPDATE_DISABLED); > > hwa742.extif->cleanup(); > > hwa742.int_ctrl->cleanup(); > > - clk_disable(hwa742.sys_ck); > > + clk_disable_unprepare(hwa742.sys_ck); > > } > > > > struct lcd_ctrl hwa742_ctrl = { > > diff --git a/drivers/video/fbdev/omap/lcdc.c b/drivers/video/fbdev/omap/lcdc.c > > index 7317c9aad677..97d20dc0d1d0 100644 > > --- a/drivers/video/fbdev/omap/lcdc.c > > +++ b/drivers/video/fbdev/omap/lcdc.c > > @@ -711,7 +711,7 @@ static int omap_lcdc_init(struct omapfb_device *fbdev, int ext_mode, > > dev_err(fbdev->dev, "failed to adjust LCD rate\n"); > > goto fail1; > > } > > - clk_enable(lcdc.lcd_ck); > > + clk_prepare_enable(lcdc.lcd_ck); > > > > r = request_irq(OMAP_LCDC_IRQ, lcdc_irq_handler, 0, MODULE_NAME, fbdev); > > if (r) { > > @@ -746,7 +746,7 @@ static int omap_lcdc_init(struct omapfb_device *fbdev, int ext_mode, > > fail3: > > free_irq(OMAP_LCDC_IRQ, lcdc.fbdev); > > fail2: > > - clk_disable(lcdc.lcd_ck); > > + clk_disable_unprepare(lcdc.lcd_ck); > > fail1: > > clk_put(lcdc.lcd_ck); > > fail0: > > @@ -760,7 +760,7 @@ static void omap_lcdc_cleanup(void) > > free_fbmem(); > > omap_free_lcd_dma(); > > free_irq(OMAP_LCDC_IRQ, lcdc.fbdev); > > - clk_disable(lcdc.lcd_ck); > > + clk_disable_unprepare(lcdc.lcd_ck); > > clk_put(lcdc.lcd_ck); > > } > > > > diff --git a/drivers/video/fbdev/omap/sossi.c b/drivers/video/fbdev/omap/sossi.c > > index 80ac67f27f0d..b9cb8b386627 100644 > > --- a/drivers/video/fbdev/omap/sossi.c > > +++ b/drivers/video/fbdev/omap/sossi.c > > @@ -598,7 +598,7 @@ static int sossi_init(struct omapfb_device *fbdev) > > l &= ~CONF_SOSSI_RESET_R; > > omap_writel(l, MOD_CONF_CTRL_1); > > > > - clk_enable(sossi.fck); > > + clk_prepare_enable(sossi.fck); > > l = omap_readl(ARM_IDLECT2); > > l &= ~(1 << 8); /* DMACK_REQ */ > > omap_writel(l, ARM_IDLECT2); > > @@ -649,7 +649,7 @@ static int sossi_init(struct omapfb_device *fbdev) > > return 0; > > > > err: > > - clk_disable(sossi.fck); > > + clk_disable_unprepare(sossi.fck); > > clk_put(sossi.fck); > > return r; > > } > > @@ -657,6 +657,7 @@ static int sossi_init(struct omapfb_device *fbdev) > > static void sossi_cleanup(void) > > { > > omap_lcdc_free_dma_callback(); > > + clk_unprepare(sossi.fck); > > clk_put(sossi.fck); > > iounmap(sossi.base); > > } > > diff --git a/sound/soc/ti/osk5912.c b/sound/soc/ti/osk5912.c > > index 40e29dda7e7a..22da3b335e81 100644 > > --- a/sound/soc/ti/osk5912.c > > +++ b/sound/soc/ti/osk5912.c > > @@ -134,6 +134,10 @@ static int __init osk_soc_init(void) > > goto err2; > > } > > > > + err = clk_prepare(tlv320aic23_mclk); > > + if (err) > > + goto err3; > > + > > /* > > * Configure 12 MHz output on MCLK. > > */ > > @@ -142,7 +146,7 @@ static int __init osk_soc_init(void) > > if (clk_set_rate(tlv320aic23_mclk, CODEC_CLOCK)) { > > printk(KERN_ERR "Cannot set MCLK for AIC23 CODEC\n"); > > err = -ECANCELED; > > - goto err3; > > + goto err4; > > } > > } > > > > @@ -151,6 +155,8 @@ static int __init osk_soc_init(void) > > > > return 0; > > > > +err4: > > + clk_unprepare(tlv320aic23_mclk); > > err3: > > clk_put(tlv320aic23_mclk); > > err2: > > @@ -164,6 +170,7 @@ static int __init osk_soc_init(void) > > > > static void __exit osk_soc_exit(void) > > { > > + clk_unprepare(tlv320aic23_mclk); > > clk_put(tlv320aic23_mclk); > > platform_device_unregister(osk_snd_device); > > } > > -- > > 2.35.1 > > > ^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2022-04-06 20:01 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
[not found] <20220310233307.99220-3-jmkrzyszt@gmail.com>
2022-03-21 21:54 ` [PATCH v2] ARM: OMAP1: Prepare for conversion of OMAP1 clocks to CCF Janusz Krzysztofik
2022-03-22 12:02 ` Mark Brown
2022-03-22 16:36 ` Aaro Koskinen
2022-03-22 19:07 ` Aaro Koskinen
2022-03-26 21:17 ` Janusz Krzysztofik
2022-04-06 13:21 ` Aaro Koskinen
2022-04-06 18:48 ` Janusz Krzysztofik
2022-04-06 20:00 ` Aaro Koskinen
2022-03-31 9:19 ` Ulf Hansson
2022-03-31 18:29 ` Janusz Krzysztofik
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox