From: Alien <alien999999999@users.sourceforge.net>
To: openvortex-dev@nongnu.org
Cc: Raymond <rayau@netvigator.com>, alsa-devel@lists.sourceforge.net
Subject: Re: au88x0_synth
Date: Tue, 7 Jun 2005 17:03:00 +0200 [thread overview]
Message-ID: <200506071703.03192.alien999999999@users.sourceforge.net> (raw)
In-Reply-To: <42A5A4A3.7040108@netvigator.com>
[-- Attachment #1: Type: text/plain, Size: 12053 bytes --]
Op dinsdag 7 juni 2005 15:44, schreef Raymond:
> From your png, it seem that you are not using the alsamixer in the
> latest version of alsa-utils.
since i'm using alsa CVS for driver, kernel and lib; i'll use utils from CVS
as well...
> The alsamixer or amixer are unable to display EQ Peaks correctly, the EQ
> Peaks is a volatile read-only kcontrol which return 20 EQ peak values
> from the 10-bands stereo hardware equalizer in au8810/au8830.
didn't know that, in the previous versions, i know that all these peaks were
listed as mono sliders, not partly mono and stereo...
> The graphic equalizer in vortexcontrol use a timer callback to read and
> display the EQ peaks when EQ Enable switch is on. (attached vc_eq.png)
vortexcontrol looks nice, from what alsa CVS package is that?
> Alien wrote:
> >>What do you mean when you say "the equalizer sliders look odd" ?
> >
> > i'll show you: see png file, notice that the first 2 peaks are stereo,
> > and the last 2 peaks are mono... ???
> >
> >>Would you post the settings of the equalizer from "/data/path/mixer" or
> >>/etc/asound.state ?
> >
> > I must also say that when restoring, i always get one warning: something
> > with bad value for... somethingorother
>
> When you upgrade from ALSA 1.0.8 to ALSA 1.0.9 ,the SPDIF sample rate
> control ( ALSA 1.0.8 ) has been replaced by the IEC958 control ( ALSA
> 1.0.9 ).
thanks for the info, but since i'm not using SPDIF, this was never any
relevance for me
> You will need to delete old setting in "/data/path/mixer" and use
> alsactl to store the new setting, otherwise error will occur if you try
> to use alsactrl to restore the value of emunerated spdif sample rate
> control settings saved by the previous ALSA version to the au8810 in
> ALSA 1.0.9 driver.
actually, this one warning has been there for quite some time, i donno if it's
emu10k1 or au8810... (i think even in 32bit, not sure about that), when
storing it, modprobe -r and modprobe again, and restoring, the warning
stays...
> Your /etc/asound.state seem OK and the equalizer is OFF.
never used the equalizer, i wasn't able to put the whole asound.state file, (i
removed the emu10k1 stuff), cause the size of the mail was too large...
> > /etc/asound.state:
> > state.au8810 {
> > control.1 {
> > comment.access 'read write'
> > comment.type BOOLEAN
> > iface MIXER
> > name 'EQ Enable'
> > value false
> > }
> > control.2 {
> > comment.access 'read write'
> > comment.type INTEGER
> > comment.range '0 - 32767'
> > iface MIXER
> > name 'EQ0 31Hz'
> > value.0 16375
> > value.1 16375
> > }
> > control.3 {
> > comment.access 'read write'
> > comment.type INTEGER
> > comment.range '0 - 32767'
> > iface MIXER
> > name 'EQ1 63Hz'
> > value.0 16392
> > value.1 16392
> > }
> > control.4 {
> > comment.access 'read write'
> > comment.type INTEGER
> > comment.range '0 - 32767'
> > iface MIXER
> > name 'EQ2 125Hz'
> > value.0 16375
> > value.1 16375
> > }
> > control.5 {
> > comment.access 'read write'
> > comment.type INTEGER
> > comment.range '0 - 32767'
> > iface MIXER
> > name 'EQ3 250Hz'
> > value.0 16022
> > value.1 16022
> > }
> > control.6 {
> > comment.access 'read write'
> > comment.type INTEGER
> > comment.range '0 - 32767'
> > iface MIXER
> > name 'EQ4 500Hz'
> > value.0 16022
> > value.1 16022
> > }
> > control.7 {
> > comment.access 'read write'
> > comment.type INTEGER
> > comment.range '0 - 32767'
> > iface MIXER
> > name 'EQ5 1KHz'
> > value.0 16022
> > value.1 16022
> > }
> > control.8 {
> > comment.access 'read write'
> > comment.type INTEGER
> > comment.range '0 - 32767'
> > iface MIXER
> > name 'EQ6 2KHz'
> > value.0 16022
> > value.1 16022
> > }
> > control.9 {
> > comment.access 'read write'
> > comment.type INTEGER
> > comment.range '0 - 32767'
> > iface MIXER
> > name 'EQ7 4KHz'
> > value.0 16022
> > value.1 16022
> > }
> > control.10 {
> > comment.access 'read write'
> > comment.type INTEGER
> > comment.range '0 - 32767'
> > iface MIXER
> > name 'EQ8 8KHz'
> > value.0 16022
> > value.1 16022
> > }
> > control.11 {
> > comment.access 'read write'
> > comment.type INTEGER
> > comment.range '0 - 32767'
> > iface MIXER
> > name 'EQ9 16KHz'
> > value.0 16022
> > value.1 16022
> > }
> > control.12 {
> > comment.access read
> > comment.type INTEGER
> > comment.range '0 - 32767'
> > iface MIXER
> > name 'EQ Peaks'
> > value.0 0
> > value.1 0
> > value.2 0
> > value.3 0
> > value.4 0
> > value.5 0
> > value.6 0
> > value.7 0
> > value.8 0
> > value.9 0
> > value.10 0
> > value.11 0
> > value.12 0
> > value.13 0
> > value.14 0
> > value.15 0
> > value.16 0
> > value.17 0
> > value.18 0
> > value.19 0
> > }
> > control.13 {
> > comment.access 'read write'
> > comment.type IEC958
> > iface PCM
> > name 'IEC958 Playback Default'
> > value
> > '008200000000000000000000000000000000000000000000000000000000000000000000
> >00000000000000000000000000000000000000000000000000000000000000000000000000
> >00000000000000000000000000000000000000000000000000000000000000000000000000
> >00000000000000000000000000000000000000000000000000000000000000000000000000
> >0000000000000000000000000000000000000000000000000000000000' }
> > control.14 {
> > comment.access read
> > comment.type IEC958
> > iface PCM
> > name 'IEC958 Playback Con Mask'
> > value
> > ffffff0f00000000000000000000000000000000000000000000000000000000000000000
> >00000000000000000000000000000000000000000000000000000000000000000000000000
> >00000000000000000000000000000000000000000000000000000000000000000000000000
> >00000000000000000000000000000000000000000000000000000000000000000000000000
> >000000000000000000000000000000000000000000000000000000000 }
> > control.15 {
> > comment.access 'read write'
> > comment.type BOOLEAN
> > iface MIXER
> > name 'Master Playback Switch'
> > value true
> > }
> > control.16 {
> > comment.access 'read write'
> > comment.type INTEGER
> > comment.range '0 - 31'
> > iface MIXER
> > name 'Master Playback Volume'
> > value.0 24
> > value.1 24
> > }
> > control.17 {
> > comment.access 'read write'
> > comment.type BOOLEAN
> > iface MIXER
> > name 'Master Mono Playback Switch'
> > value true
> > }
> > control.18 {
> > comment.access 'read write'
> > comment.type INTEGER
> > comment.range '0 - 31'
> > iface MIXER
> > name 'Master Mono Playback Volume'
> > value 24
> > }
> > control.19 {
> > comment.access 'read write'
> > comment.type BOOLEAN
> > iface MIXER
> > name 'PC Speaker Playback Switch'
> > value false
> > }
> > control.20 {
> > comment.access 'read write'
> > comment.type INTEGER
> > comment.range '0 - 15'
> > iface MIXER
> > name 'PC Speaker Playback Volume'
> > value 0
> > }
> > control.21 {
> > comment.access 'read write'
> > comment.type BOOLEAN
> > iface MIXER
> > name 'Phone Playback Switch'
> > value false
> > }
> > control.22 {
> > comment.access 'read write'
> > comment.type INTEGER
> > comment.range '0 - 31'
> > iface MIXER
> > name 'Phone Playback Volume'
> > value 0
> > }
> > control.23 {
> > comment.access 'read write'
> > comment.type BOOLEAN
> > iface MIXER
> > name 'Mic Playback Switch'
> > value false
> > }
> > control.24 {
> > comment.access 'read write'
> > comment.type INTEGER
> > comment.range '0 - 31'
> > iface MIXER
> > name 'Mic Playback Volume'
> > value 0
> > }
> > control.25 {
> > comment.access 'read write'
> > comment.type BOOLEAN
> > iface MIXER
> > name 'Mic Boost (+20dB)'
> > value false
> > }
> > control.26 {
> > comment.access 'read write'
> > comment.type BOOLEAN
> > iface MIXER
> > name 'Line Playback Switch'
> > value true
> > }
> > control.27 {
> > comment.access 'read write'
> > comment.type INTEGER
> > comment.range '0 - 31'
> > iface MIXER
> > name 'Line Playback Volume'
> > value.0 24
> > value.1 24
> > }
> > control.28 {
> > comment.access 'read write'
> > comment.type BOOLEAN
> > iface MIXER
> > name 'CD Playback Switch'
> > value true
> > }
> > control.29 {
> > comment.access 'read write'
> > comment.type INTEGER
> > comment.range '0 - 31'
> > iface MIXER
> > name 'CD Playback Volume'
> > value.0 24
> > value.1 24
> > }
> > control.30 {
> > comment.access 'read write'
> > comment.type BOOLEAN
> > iface MIXER
> > name 'Video Playback Switch'
> > value false
> > }
> > control.31 {
> > comment.access 'read write'
> > comment.type INTEGER
> > comment.range '0 - 31'
> > iface MIXER
> > name 'Video Playback Volume'
> > value.0 0
> > value.1 0
> > }
> > control.32 {
> > comment.access 'read write'
> > comment.type BOOLEAN
> > iface MIXER
> > name 'Aux Playback Switch'
> > value false
> > }
> > control.33 {
> > comment.access 'read write'
> > comment.type INTEGER
> > comment.range '0 - 31'
> > iface MIXER
> > name 'Aux Playback Volume'
> > value.0 0
> > value.1 0
> > }
> > control.34 {
> > comment.access 'read write'
> > comment.type BOOLEAN
> > iface MIXER
> > name 'PCM Playback Switch'
> > value true
> > }
> > control.35 {
> > comment.access 'read write'
> > comment.type INTEGER
> > comment.range '0 - 31'
> > iface MIXER
> > name 'PCM Playback Volume'
> > value.0 24
> > value.1 24
> > }
> > control.36 {
> > comment.access 'read write'
> > comment.type ENUMERATED
> > comment.item.0 Mic
> > comment.item.1 CD
> > comment.item.2 Video
> > comment.item.3 Aux
> > comment.item.4 Line
> > comment.item.5 Mix
> > comment.item.6 'Mix Mono'
> > comment.item.7 Phone
> > iface MIXER
> > name 'Capture Source'
> > value.0 Line
> > value.1 Line
> > }
> > control.37 {
> > comment.access 'read write'
> > comment.type BOOLEAN
> > iface MIXER
> > name 'Capture Switch'
> > value true
> > }
> > control.38 {
> > comment.access 'read write'
> > comment.type INTEGER
> > comment.range '0 - 15'
> > iface MIXER
> > name 'Capture Volume'
> > value.0 12
> > value.1 12
> > }
> > control.39 {
> > comment.access 'read write'
> > comment.type ENUMERATED
> > comment.item.0 Mix
> > comment.item.1 Mic
> > iface MIXER
> > name 'Mono Output Select'
> > value Mix
> > }
> > control.40 {
> > comment.access 'read write'
> > comment.type ENUMERATED
> > comment.item.0 Mic1
> > comment.item.1 Mic2
> > iface MIXER
> > name 'Mic Select'
> > value Mic1
> > }
> > }
>
> After eight instances of "mplayer" playing stereo music concurrently in
> my 32-bits machine and start an instance of aplay.
>
> aplay outls.wav
> Playing WAVE 'outls.wav' : Signed 16 bit Little Endian, Rate 22050 Hz,
> Stereo
> aplay: set_params:935: Unable to install hw params:
> ACCESS: RW_INTERLEAVED
> FORMAT: S16_LE
> SUBFORMAT: STD
> SAMPLE_BITS: 16
> FRAME_BITS: 32
> CHANNELS: 2
> RATE: 22050
> PERIOD_TIME: (46439 46440)
> PERIOD_SIZE: 1024
> PERIOD_BYTES: 4096
> PERIODS: 11
> BUFFER_TIME: (510839 510840)
> BUFFER_SIZE: 11264
> BUFFER_BYTES: 45056
> TICK_TIME: 10000
>
>
> aplay abort as there is no more SampleRateConvertors available.
>
> There is no deadlock or hang. After the "mplayer" finish playing and
> release the SRCs, I can start another instance of ALSA application to
> play music.
I'm going to try to do the same thing with xine and CVS aplay, see what
happens...
[-- Attachment #2: Type: application/pgp-signature, Size: 189 bytes --]
next prev parent reply other threads:[~2005-06-07 15:03 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-03-20 1:11 au88x0_synth Raymond
2005-03-21 20:00 ` au88x0_synth Takashi Iwai
2005-03-30 8:04 ` au88x0_synth Raymond
2005-03-30 8:09 ` au88x0_synth Clemens Ladisch
2005-04-12 14:14 ` au88x0_synth Raymond
2005-04-14 15:31 ` au88x0_synth Raymond
2005-04-15 13:07 ` au88x0_synth Takashi Iwai
2005-04-19 8:39 ` au88x0_synth Raymond
2005-04-19 9:39 ` au88x0_synth Takashi Iwai
2005-04-20 9:33 ` au88x0_synth Raymond
2005-05-07 12:27 ` au88x0_synth Raymond
2005-03-30 8:13 ` au88x0_synth Alien
2005-03-30 10:08 ` Takashi Iwai
2005-03-30 10:21 ` Alien
2005-03-30 10:27 ` Takashi Iwai
2005-04-23 4:04 ` au88x0_synth Raymond
2005-04-23 7:28 ` au88x0_synth Alien
2005-04-28 10:21 ` au88x0_synth Raymond
2005-05-13 14:05 ` au88x0_synth Raymond
2005-05-13 14:27 ` au88x0_synth Alien
2005-05-14 8:12 ` au88x0_synth Raymond
2005-05-15 12:41 ` au88x0_synth Alien
2005-06-06 2:56 ` au88x0_synth Raymond
2005-06-06 8:49 ` au88x0_synth Alien
2005-06-06 8:56 ` Suspicious Attachment phiber
2005-06-06 11:03 ` au88x0_synth Raymond
2005-06-06 14:35 ` au88x0_synth Alien
2005-06-07 13:44 ` au88x0_synth Raymond
2005-06-07 15:03 ` Alien [this message]
2005-03-31 22:52 ` au88x0_synth Manuel Jander
2005-07-01 13:42 ` au88x0_synth Raymond
2005-03-24 14:34 ` au88x0_synth Manuel Jander
2005-03-31 9:23 ` au88x0_synth Raymond
2005-03-31 10:40 ` au88x0_synth Clemens Ladisch
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200506071703.03192.alien999999999@users.sourceforge.net \
--to=alien999999999@users.sourceforge.net \
--cc=alsa-devel@lists.sourceforge.net \
--cc=openvortex-dev@nongnu.org \
--cc=rayau@netvigator.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox