Re: au88x0_synth

[Raymond <rayau@netvigator.com>]

It is abnormal to get the message "vortex: reg error" on your au8810, it 
does not appear in my au8830.

http://savannah.nongnu.org/support/?func=detailitem&item_id=102951

You will need to find out the code which cause "vortex: reg error".

You may try the following:

1) Remove code relating to SPDIF ( only SQ1500 and au8830 has SPDIF )

2) use hwwrite(vortex->mmio, VORTEX_CODEC_EN,
hwread(vortex->mmio, VORTEX_CODEC_EN) | EN_CODEC0);

No need to use (EN_CODEC0 | EN_CODEC1 ) since your au8810 only has 
stereo codec.

You can use .openalrc to configure OpenAL to use ALSA

(define devices '(alsa))
(define speaker-num 2)
(define alsa-out-device "hw:0,0")
(define alsa-in-device "hw:0,0")


> 
> 
>>Use alsamixer to find out which ac97 codec on your au8810.
> 
> 
> chip: Wolfson WM9701A
> 
> 
>>Do you have any application using gameport, mpu401 or OSS  ?
> 
> 
> haven't gotten any gameport to work, not on the emu10k1 nor the au8810, never 
> use MPU401 and i use OSS emulation on games like AA, ET, OpenAL...
> 
> 
>>>i've had this major crash below only 3 times; and the logs didn't
>>>detect anything specific at the time. the only thing the logs
>>>mentioned at that time was an ntpd sync going on; so the only thing i
>>>can think of is that at a certain moment when a sync is going on, some
>>>kind of lock is holding cause this to happen... the only thing that i
>>>can do to fix this is reset...
>>
>>Do the log indicate the snd-au8810 is loaded properly ?
> 
> 
> yes of course: it gives
> 
> vortex: reg error
> 
> as always ;-)
> 
> 







-------------------------------------------------------
This SF.Net email is sponsored by Oracle Space Sweepstakes
Want to be the first software developer in space?
Enter now for the Oracle Space Sweepstakes!
http://ads.osdn.com/?ad_id=7393&alloc_id=16281&op=click