Alsa-Devel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: Cezary Rojewski <cezary.rojewski@intel.com>
To: alsa-devel@alsa-project.org
Cc: lgirdwood@gmail.com, Cezary Rojewski <cezary.rojewski@intel.com>,
	broonie@kernel.org, tiwai@suse.com,
	pierre-louis.bossart@linux.intel.com
Subject: [RESEND PATCH v3] ASoC: Intel: Skylake: large_config_get overhaul
Date: Wed,  7 Aug 2019 15:47:45 +0200	[thread overview]
Message-ID: <20190807134745.1648-1-cezary.rojewski@intel.com> (raw)

LARGE_CONFIG_GET is among the most crucial IPCs. Host is expected to
send single request first to obtain total payload size from received
header's data_off_size. From then on, it loops for each frame exceeding
inbox size until entire payload is read. If entire payload is contained
within the very first frame, no looping is performed.

LARGE_CONFIG_GET is a flexible IPC, it not only receives payload but may
carry one with them to provide list of params DSP module should return
info for. This behavior is usually reserved for vendors and IPC handler
should not touch that content. To achieve that, simply pass provided
payload and bytes to sst_ipc_tx_message_wait as a part of request.

In current state, LARGE_CONFIG_GET message handler does nothing of that,
in consequence making it dysfunctional. Overhaul said handler allowing
rightful king of IPCs to return back on his throne - kingdom he shares
with his twin brother: LARGE_CONFIG_SET.

The looping has not been added in this update as payloads of such size
do not exist in practice. Will need to create custom module specifically
for that very case and test against it before that feature can be added.

Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
---
 sound/soc/intel/skylake/skl-messages.c |  3 +-
 sound/soc/intel/skylake/skl-sst-ipc.c  | 54 +++++++++++---------------
 sound/soc/intel/skylake/skl-sst-ipc.h  |  3 +-
 3 files changed, 27 insertions(+), 33 deletions(-)

diff --git a/sound/soc/intel/skylake/skl-messages.c b/sound/soc/intel/skylake/skl-messages.c
index e8cc710f092b..84f0e6f58eb5 100644
--- a/sound/soc/intel/skylake/skl-messages.c
+++ b/sound/soc/intel/skylake/skl-messages.c
@@ -1379,11 +1379,12 @@ int skl_get_module_params(struct skl_dev *skl, u32 *params, int size,
 			  u32 param_id, struct skl_module_cfg *mcfg)
 {
 	struct skl_ipc_large_config_msg msg;
+	size_t bytes = size;
 
 	msg.module_id = mcfg->id.module_id;
 	msg.instance_id = mcfg->id.pvt_id;
 	msg.param_data_size = size;
 	msg.large_param_id = param_id;
 
-	return skl_ipc_get_large_config(&skl->ipc, &msg, params);
+	return skl_ipc_get_large_config(&skl->ipc, &msg, &params, &bytes);
 }
diff --git a/sound/soc/intel/skylake/skl-sst-ipc.c b/sound/soc/intel/skylake/skl-sst-ipc.c
index a2b69a02aab2..9d269a5f8bd9 100644
--- a/sound/soc/intel/skylake/skl-sst-ipc.c
+++ b/sound/soc/intel/skylake/skl-sst-ipc.c
@@ -969,12 +969,17 @@ int skl_ipc_set_large_config(struct sst_generic_ipc *ipc,
 EXPORT_SYMBOL_GPL(skl_ipc_set_large_config);
 
 int skl_ipc_get_large_config(struct sst_generic_ipc *ipc,
-		struct skl_ipc_large_config_msg *msg, u32 *param)
+		struct skl_ipc_large_config_msg *msg,
+		unsigned int **payload, size_t *bytes)
 {
 	struct skl_ipc_header header = {0};
-	struct sst_ipc_message request = {0}, reply = {0};
-	int ret = 0;
-	size_t sz_remaining, rx_size, data_offset;
+	struct sst_ipc_message request, reply = {0};
+	unsigned int *buf;
+	int ret;
+
+	reply.data = kzalloc(SKL_ADSP_W1_SZ, GFP_KERNEL);
+	if (!reply.data)
+		return -ENOMEM;
 
 	header.primary = IPC_MSG_TARGET(IPC_MOD_MSG);
 	header.primary |= IPC_MSG_DIR(IPC_MSG_REQUEST);
@@ -987,34 +992,21 @@ int skl_ipc_get_large_config(struct sst_generic_ipc *ipc,
 	header.extension |= IPC_FINAL_BLOCK(1);
 	header.extension |= IPC_INITIAL_BLOCK(1);
 
-	sz_remaining = msg->param_data_size;
-	data_offset = 0;
-
-	while (sz_remaining != 0) {
-		rx_size = sz_remaining > SKL_ADSP_W1_SZ
-				? SKL_ADSP_W1_SZ : sz_remaining;
-		if (rx_size == sz_remaining)
-			header.extension |= IPC_FINAL_BLOCK(1);
-
-		request.header = *(u64 *)(&header);
-		reply.data = ((char *)param) + data_offset;
-		reply.size = msg->param_data_size;
-		ret = sst_ipc_tx_message_wait(ipc, request, &reply);
-		if (ret < 0) {
-			dev_err(ipc->dev,
-				"ipc: get large config fail, err: %d\n", ret);
-			return ret;
-		}
-		sz_remaining -= rx_size;
-		data_offset = msg->param_data_size - sz_remaining;
+	request.header = *(u64 *)&header;
+	request.data = *payload;
+	request.size = *bytes;
+	reply.size = SKL_ADSP_W1_SZ;
 
-		/* clear the fields */
-		header.extension &= IPC_INITIAL_BLOCK_CLEAR;
-		header.extension &= IPC_DATA_OFFSET_SZ_CLEAR;
-		/* fill the fields */
-		header.extension |= IPC_INITIAL_BLOCK(1);
-		header.extension |= IPC_DATA_OFFSET_SZ(data_offset);
-	}
+	ret = sst_ipc_tx_message_wait(ipc, request, &reply);
+	if (ret < 0)
+		dev_err(ipc->dev, "ipc: get large config fail: %d\n", ret);
+
+	reply.size = (reply.header >> 32) & IPC_DATA_OFFSET_SZ_MASK;
+	buf = krealloc(reply.data, reply.size, GFP_KERNEL);
+	if (!buf)
+		return -ENOMEM;
+	*payload = buf;
+	*bytes = reply.size;
 
 	return ret;
 }
diff --git a/sound/soc/intel/skylake/skl-sst-ipc.h b/sound/soc/intel/skylake/skl-sst-ipc.h
index 93af08cf41d2..a7ab2c589cc5 100644
--- a/sound/soc/intel/skylake/skl-sst-ipc.h
+++ b/sound/soc/intel/skylake/skl-sst-ipc.h
@@ -139,7 +139,8 @@ int skl_ipc_set_large_config(struct sst_generic_ipc *ipc,
 		struct skl_ipc_large_config_msg *msg, u32 *param);
 
 int skl_ipc_get_large_config(struct sst_generic_ipc *ipc,
-		struct skl_ipc_large_config_msg *msg, u32 *param);
+		struct skl_ipc_large_config_msg *msg,
+		unsigned int **payload, size_t *bytes);
 
 int skl_sst_ipc_load_library(struct sst_generic_ipc *ipc,
 			u8 dma_id, u8 table_id, bool wait);
-- 
2.17.1

             reply	other threads:[~2019-08-07 13:47 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-08-07 13:47 Cezary Rojewski [this message]
2019-08-07 20:00 ` [RESEND PATCH v3] ASoC: Intel: Skylake: large_config_get overhaul Pierre-Louis Bossart
2019-08-07 20:51   ` Cezary Rojewski
2019-08-08  3:30     ` Pierre-Louis Bossart
2019-08-08 10:31       ` Cezary Rojewski

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20190807134745.1648-1-cezary.rojewski@intel.com \
    --to=cezary.rojewski@intel.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=broonie@kernel.org \
    --cc=lgirdwood@gmail.com \
    --cc=pierre-louis.bossart@linux.intel.com \
    --cc=tiwai@suse.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox