[alsa-devel] [PATCH v2 0/3] Several SAI fixes

[alsa-devel] [PATCH v2 0/3] Several SAI fixes

[Daniel Baluta]

This series contains several fixes for SAI. They are unrelated
but grouped them in a patch series to be easier applied.

Daniel Baluta (1):
  ASoC: fsl_sai: Fix TCSR.TE/RCSR.RE in synchronous mode

Mihai Serban (1):
  ASoC: fsl_sai: Fix noise when using EDMA

Shengjiu Wang (1):
  ASoC: fsl_sai: Fix xMR setting in synchronous mode

 sound/soc/fsl/fsl_sai.c | 31 ++++++++++++++++++++++---------
 sound/soc/fsl/fsl_sai.h |  1 +
 2 files changed, 23 insertions(+), 9 deletions(-)

-- 
2.17.1

_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel

[alsa-devel] [PATCH v2 1/3] ASoC: fsl_sai: Fix noise when using EDMA

[Daniel Baluta]

From: Mihai Serban <mihai.serban@nxp.com>

EDMA requires the period size to be multiple of maxburst. Otherwise the
remaining bytes are not transferred and thus noise is produced.

We can handle this issue by adding a constraint on
SNDRV_PCM_HW_PARAM_PERIOD_SIZE to be multiple of tx/rx maxburst value.

Signed-off-by: Mihai Serban <mihai.serban@nxp.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
---
Changes since v1:
* rename variable to use_edma as per Nicolin's suggestion.

 sound/soc/fsl/fsl_sai.c | 15 +++++++++++++++
 sound/soc/fsl/fsl_sai.h |  1 +
 2 files changed, 16 insertions(+)

diff --git a/sound/soc/fsl/fsl_sai.c b/sound/soc/fsl/fsl_sai.c
index ef0b74693093..b517e4bc1b87 100644
--- a/sound/soc/fsl/fsl_sai.c
+++ b/sound/soc/fsl/fsl_sai.c
@@ -628,6 +628,16 @@ static int fsl_sai_startup(struct snd_pcm_substream *substream,
 			   FSL_SAI_CR3_TRCE_MASK,
 			   FSL_SAI_CR3_TRCE);
 
+	/*
+	 * EDMA controller needs period size to be a multiple of
+	 * tx/rx maxburst
+	 */
+	if (sai->soc_data->use_edma)
+		snd_pcm_hw_constraint_step(substream->runtime, 0,
+					   SNDRV_PCM_HW_PARAM_PERIOD_SIZE,
+					   tx ? sai->dma_params_tx.maxburst :
+					   sai->dma_params_rx.maxburst);
+
 	ret = snd_pcm_hw_constraint_list(substream->runtime, 0,
 			SNDRV_PCM_HW_PARAM_RATE, &fsl_sai_rate_constraints);
 
@@ -1026,30 +1036,35 @@ static int fsl_sai_remove(struct platform_device *pdev)
 
 static const struct fsl_sai_soc_data fsl_sai_vf610_data = {
 	.use_imx_pcm = false,
+	.use_edma = false,
 	.fifo_depth = 32,
 	.reg_offset = 0,
 };
 
 static const struct fsl_sai_soc_data fsl_sai_imx6sx_data = {
 	.use_imx_pcm = true,
+	.use_edma = false,
 	.fifo_depth = 32,
 	.reg_offset = 0,
 };
 
 static const struct fsl_sai_soc_data fsl_sai_imx7ulp_data = {
 	.use_imx_pcm = true,
+	.use_edma = false,
 	.fifo_depth = 16,
 	.reg_offset = 8,
 };
 
 static const struct fsl_sai_soc_data fsl_sai_imx8mq_data = {
 	.use_imx_pcm = true,
+	.use_edma = false,
 	.fifo_depth = 128,
 	.reg_offset = 8,
 };
 
 static const struct fsl_sai_soc_data fsl_sai_imx8qm_data = {
 	.use_imx_pcm = true,
+	.use_edma = true,
 	.fifo_depth = 64,
 	.reg_offset = 0,
 };
diff --git a/sound/soc/fsl/fsl_sai.h b/sound/soc/fsl/fsl_sai.h
index b12cb578f6d0..76b15deea80c 100644
--- a/sound/soc/fsl/fsl_sai.h
+++ b/sound/soc/fsl/fsl_sai.h
@@ -157,6 +157,7 @@
 
 struct fsl_sai_soc_data {
 	bool use_imx_pcm;
+	bool use_edma;
 	unsigned int fifo_depth;
 	unsigned int reg_offset;
 };
-- 
2.17.1

_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel

Re: [alsa-devel] [PATCH v2 1/3] ASoC: fsl_sai: Fix noise when using EDMA

[Nicolin Chen]

On Fri, Sep 13, 2019 at 10:28:05PM +0300, Daniel Baluta wrote:
> From: Mihai Serban <mihai.serban@nxp.com>
> 
> EDMA requires the period size to be multiple of maxburst. Otherwise the
> remaining bytes are not transferred and thus noise is produced.
> 
> We can handle this issue by adding a constraint on
> SNDRV_PCM_HW_PARAM_PERIOD_SIZE to be multiple of tx/rx maxburst value.
> 
> Signed-off-by: Mihai Serban <mihai.serban@nxp.com>
> Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>

Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>

Thanks

> ---
> Changes since v1:
> * rename variable to use_edma as per Nicolin's suggestion.
> 
>  sound/soc/fsl/fsl_sai.c | 15 +++++++++++++++
>  sound/soc/fsl/fsl_sai.h |  1 +
>  2 files changed, 16 insertions(+)
> 
> diff --git a/sound/soc/fsl/fsl_sai.c b/sound/soc/fsl/fsl_sai.c
> index ef0b74693093..b517e4bc1b87 100644
> --- a/sound/soc/fsl/fsl_sai.c
> +++ b/sound/soc/fsl/fsl_sai.c
> @@ -628,6 +628,16 @@ static int fsl_sai_startup(struct snd_pcm_substream *substream,
>  			   FSL_SAI_CR3_TRCE_MASK,
>  			   FSL_SAI_CR3_TRCE);
>  
> +	/*
> +	 * EDMA controller needs period size to be a multiple of
> +	 * tx/rx maxburst
> +	 */
> +	if (sai->soc_data->use_edma)
> +		snd_pcm_hw_constraint_step(substream->runtime, 0,
> +					   SNDRV_PCM_HW_PARAM_PERIOD_SIZE,
> +					   tx ? sai->dma_params_tx.maxburst :
> +					   sai->dma_params_rx.maxburst);
> +
>  	ret = snd_pcm_hw_constraint_list(substream->runtime, 0,
>  			SNDRV_PCM_HW_PARAM_RATE, &fsl_sai_rate_constraints);
>  
> @@ -1026,30 +1036,35 @@ static int fsl_sai_remove(struct platform_device *pdev)
>  
>  static const struct fsl_sai_soc_data fsl_sai_vf610_data = {
>  	.use_imx_pcm = false,
> +	.use_edma = false,
>  	.fifo_depth = 32,
>  	.reg_offset = 0,
>  };
>  
>  static const struct fsl_sai_soc_data fsl_sai_imx6sx_data = {
>  	.use_imx_pcm = true,
> +	.use_edma = false,
>  	.fifo_depth = 32,
>  	.reg_offset = 0,
>  };
>  
>  static const struct fsl_sai_soc_data fsl_sai_imx7ulp_data = {
>  	.use_imx_pcm = true,
> +	.use_edma = false,
>  	.fifo_depth = 16,
>  	.reg_offset = 8,
>  };
>  
>  static const struct fsl_sai_soc_data fsl_sai_imx8mq_data = {
>  	.use_imx_pcm = true,
> +	.use_edma = false,
>  	.fifo_depth = 128,
>  	.reg_offset = 8,
>  };
>  
>  static const struct fsl_sai_soc_data fsl_sai_imx8qm_data = {
>  	.use_imx_pcm = true,
> +	.use_edma = true,
>  	.fifo_depth = 64,
>  	.reg_offset = 0,
>  };
> diff --git a/sound/soc/fsl/fsl_sai.h b/sound/soc/fsl/fsl_sai.h
> index b12cb578f6d0..76b15deea80c 100644
> --- a/sound/soc/fsl/fsl_sai.h
> +++ b/sound/soc/fsl/fsl_sai.h
> @@ -157,6 +157,7 @@
>  
>  struct fsl_sai_soc_data {
>  	bool use_imx_pcm;
> +	bool use_edma;
>  	unsigned int fifo_depth;
>  	unsigned int reg_offset;
>  };
> -- 
> 2.17.1
> 
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel

[alsa-devel] Applied "ASoC: fsl_sai: Fix noise when using EDMA" to the asoc tree

[Mark Brown]

The patch

   ASoC: fsl_sai: Fix noise when using EDMA

has been applied to the asoc tree at

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-5.4

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.  

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark

From e75f4940e8ad0dd76527302a10c06b58bf7eb590 Mon Sep 17 00:00:00 2001
From: Mihai Serban <mihai.serban@nxp.com>
Date: Fri, 13 Sep 2019 22:28:05 +0300
Subject: [PATCH] ASoC: fsl_sai: Fix noise when using EDMA

EDMA requires the period size to be multiple of maxburst. Otherwise the
remaining bytes are not transferred and thus noise is produced.

We can handle this issue by adding a constraint on
SNDRV_PCM_HW_PARAM_PERIOD_SIZE to be multiple of tx/rx maxburst value.

Signed-off-by: Mihai Serban <mihai.serban@nxp.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Link: https://lore.kernel.org/r/20190913192807.8423-2-daniel.baluta@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
---
 sound/soc/fsl/fsl_sai.c | 15 +++++++++++++++
 sound/soc/fsl/fsl_sai.h |  1 +
 2 files changed, 16 insertions(+)

diff --git a/sound/soc/fsl/fsl_sai.c b/sound/soc/fsl/fsl_sai.c
index ef0b74693093..b517e4bc1b87 100644
--- a/sound/soc/fsl/fsl_sai.c
+++ b/sound/soc/fsl/fsl_sai.c
@@ -628,6 +628,16 @@ static int fsl_sai_startup(struct snd_pcm_substream *substream,
 			   FSL_SAI_CR3_TRCE_MASK,
 			   FSL_SAI_CR3_TRCE);
 
+	/*
+	 * EDMA controller needs period size to be a multiple of
+	 * tx/rx maxburst
+	 */
+	if (sai->soc_data->use_edma)
+		snd_pcm_hw_constraint_step(substream->runtime, 0,
+					   SNDRV_PCM_HW_PARAM_PERIOD_SIZE,
+					   tx ? sai->dma_params_tx.maxburst :
+					   sai->dma_params_rx.maxburst);
+
 	ret = snd_pcm_hw_constraint_list(substream->runtime, 0,
 			SNDRV_PCM_HW_PARAM_RATE, &fsl_sai_rate_constraints);
 
@@ -1026,30 +1036,35 @@ static int fsl_sai_remove(struct platform_device *pdev)
 
 static const struct fsl_sai_soc_data fsl_sai_vf610_data = {
 	.use_imx_pcm = false,
+	.use_edma = false,
 	.fifo_depth = 32,
 	.reg_offset = 0,
 };
 
 static const struct fsl_sai_soc_data fsl_sai_imx6sx_data = {
 	.use_imx_pcm = true,
+	.use_edma = false,
 	.fifo_depth = 32,
 	.reg_offset = 0,
 };
 
 static const struct fsl_sai_soc_data fsl_sai_imx7ulp_data = {
 	.use_imx_pcm = true,
+	.use_edma = false,
 	.fifo_depth = 16,
 	.reg_offset = 8,
 };
 
 static const struct fsl_sai_soc_data fsl_sai_imx8mq_data = {
 	.use_imx_pcm = true,
+	.use_edma = false,
 	.fifo_depth = 128,
 	.reg_offset = 8,
 };
 
 static const struct fsl_sai_soc_data fsl_sai_imx8qm_data = {
 	.use_imx_pcm = true,
+	.use_edma = true,
 	.fifo_depth = 64,
 	.reg_offset = 0,
 };
diff --git a/sound/soc/fsl/fsl_sai.h b/sound/soc/fsl/fsl_sai.h
index b12cb578f6d0..76b15deea80c 100644
--- a/sound/soc/fsl/fsl_sai.h
+++ b/sound/soc/fsl/fsl_sai.h
@@ -157,6 +157,7 @@
 
 struct fsl_sai_soc_data {
 	bool use_imx_pcm;
+	bool use_edma;
 	unsigned int fifo_depth;
 	unsigned int reg_offset;
 };
-- 
2.20.1

_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel

[alsa-devel] [PATCH v2 2/3] ASoC: fsl_sai: Fix xMR setting in synchronous mode

[Daniel Baluta]

From: Shengjiu Wang <shengjiu.wang@nxp.com>

When Tx is synchronous with receiver the RMR should not be changed.
When Rx is synchronous with transmitter the TMR should not be changed.

Cc: NXP Linux Team <linux-imx@nxp.com>
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
---
Changes since v1:
* new patch

 sound/soc/fsl/fsl_sai.c | 4 ----
 1 file changed, 4 deletions(-)

diff --git a/sound/soc/fsl/fsl_sai.c b/sound/soc/fsl/fsl_sai.c
index b517e4bc1b87..6598a1ae0a2d 100644
--- a/sound/soc/fsl/fsl_sai.c
+++ b/sound/soc/fsl/fsl_sai.c
@@ -482,8 +482,6 @@ static int fsl_sai_hw_params(struct snd_pcm_substream *substream,
 			regmap_update_bits(sai->regmap, FSL_SAI_TCR5(ofs),
 				FSL_SAI_CR5_WNW_MASK | FSL_SAI_CR5_W0W_MASK |
 				FSL_SAI_CR5_FBT_MASK, val_cr5);
-			regmap_write(sai->regmap, FSL_SAI_TMR,
-				~0UL - ((1 << channels) - 1));
 		} else if (!sai->synchronous[RX] && sai->synchronous[TX] && tx) {
 			regmap_update_bits(sai->regmap, FSL_SAI_RCR4(ofs),
 				FSL_SAI_CR4_SYWD_MASK | FSL_SAI_CR4_FRSZ_MASK,
@@ -491,8 +489,6 @@ static int fsl_sai_hw_params(struct snd_pcm_substream *substream,
 			regmap_update_bits(sai->regmap, FSL_SAI_RCR5(ofs),
 				FSL_SAI_CR5_WNW_MASK | FSL_SAI_CR5_W0W_MASK |
 				FSL_SAI_CR5_FBT_MASK, val_cr5);
-			regmap_write(sai->regmap, FSL_SAI_RMR,
-				~0UL - ((1 << channels) - 1));
 		}
 	}
 
-- 
2.17.1

_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel

Re: [alsa-devel] [PATCH v2 2/3] ASoC: fsl_sai: Fix xMR setting in synchronous mode

[Nicolin Chen]

On Fri, Sep 13, 2019 at 10:28:06PM +0300, Daniel Baluta wrote:
> From: Shengjiu Wang <shengjiu.wang@nxp.com>
> 
> When Tx is synchronous with receiver the RMR should not be changed.
> When Rx is synchronous with transmitter the TMR should not be changed.

Would you please explain why and what bug this patch fixes?
We might want to Cc stable kernel too if it's a useful fix.

Thank you.
 
> Cc: NXP Linux Team <linux-imx@nxp.com>
> Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
> Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
> ---
> Changes since v1:
> * new patch
> 
>  sound/soc/fsl/fsl_sai.c | 4 ----
>  1 file changed, 4 deletions(-)
> 
> diff --git a/sound/soc/fsl/fsl_sai.c b/sound/soc/fsl/fsl_sai.c
> index b517e4bc1b87..6598a1ae0a2d 100644
> --- a/sound/soc/fsl/fsl_sai.c
> +++ b/sound/soc/fsl/fsl_sai.c
> @@ -482,8 +482,6 @@ static int fsl_sai_hw_params(struct snd_pcm_substream *substream,
>  			regmap_update_bits(sai->regmap, FSL_SAI_TCR5(ofs),
>  				FSL_SAI_CR5_WNW_MASK | FSL_SAI_CR5_W0W_MASK |
>  				FSL_SAI_CR5_FBT_MASK, val_cr5);
> -			regmap_write(sai->regmap, FSL_SAI_TMR,
> -				~0UL - ((1 << channels) - 1));
>  		} else if (!sai->synchronous[RX] && sai->synchronous[TX] && tx) {
>  			regmap_update_bits(sai->regmap, FSL_SAI_RCR4(ofs),
>  				FSL_SAI_CR4_SYWD_MASK | FSL_SAI_CR4_FRSZ_MASK,
> @@ -491,8 +489,6 @@ static int fsl_sai_hw_params(struct snd_pcm_substream *substream,
>  			regmap_update_bits(sai->regmap, FSL_SAI_RCR5(ofs),
>  				FSL_SAI_CR5_WNW_MASK | FSL_SAI_CR5_W0W_MASK |
>  				FSL_SAI_CR5_FBT_MASK, val_cr5);
> -			regmap_write(sai->regmap, FSL_SAI_RMR,
> -				~0UL - ((1 << channels) - 1));
>  		}
>  	}
>  
> -- 
> 2.17.1
> 
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel

[alsa-devel] [PATCH v2 3/3] ASoC: fsl_sai: Fix TCSR.TE/RCSR.RE in synchronous mode

[Daniel Baluta]

The SAI transmitter and receiver can be configured to operate with
synchronous bit clock and frame sync.

When Tx is synchronous with receiver RCSR.RE should be set in playback
to enable the receiver which provides bit clock and frame sync.

When Rx is synchronous with transmitter TCSR.TE should be set in record
to enable the transmitter which provides bit clock and frame sync.

Cc: NXP Linux Team <linux-imx@nxp.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
---
Changes since v1: 
* new patch

 sound/soc/fsl/fsl_sai.c | 12 +++++++-----
 1 file changed, 7 insertions(+), 5 deletions(-)

diff --git a/sound/soc/fsl/fsl_sai.c b/sound/soc/fsl/fsl_sai.c
index 6598a1ae0a2d..a59300e37549 100644
--- a/sound/soc/fsl/fsl_sai.c
+++ b/sound/soc/fsl/fsl_sai.c
@@ -539,8 +539,8 @@ static int fsl_sai_trigger(struct snd_pcm_substream *substream, int cmd,
 			   sai->synchronous[RX] ? FSL_SAI_CR2_SYNC : 0);
 
 	/*
-	 * It is recommended that the transmitter is the last enabled
-	 * and the first disabled.
+	 * it is recommended that the asynchronous block to be the last enabled
+	 * and the first disabled
 	 */
 	switch (cmd) {
 	case SNDRV_PCM_TRIGGER_START:
@@ -549,9 +549,11 @@ static int fsl_sai_trigger(struct snd_pcm_substream *substream, int cmd,
 		regmap_update_bits(sai->regmap, FSL_SAI_xCSR(tx, ofs),
 				   FSL_SAI_CSR_FRDE, FSL_SAI_CSR_FRDE);
 
-		regmap_update_bits(sai->regmap, FSL_SAI_RCSR(ofs),
-				   FSL_SAI_CSR_TERE, FSL_SAI_CSR_TERE);
-		regmap_update_bits(sai->regmap, FSL_SAI_TCSR(ofs),
+		if (sai->synchronous[tx])
+			regmap_update_bits(sai->regmap, FSL_SAI_xCSR(!tx, ofs),
+					   FSL_SAI_CSR_TERE, FSL_SAI_CSR_TERE);
+
+		regmap_update_bits(sai->regmap, FSL_SAI_xCSR(tx, ofs),
 				   FSL_SAI_CSR_TERE, FSL_SAI_CSR_TERE);
 
 		regmap_update_bits(sai->regmap, FSL_SAI_xCSR(tx, ofs),
-- 
2.17.1

_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel

Re: [alsa-devel] [PATCH v2 3/3] ASoC: fsl_sai: Fix TCSR.TE/RCSR.RE in synchronous mode

[Nicolin Chen]

Hello Daniel,

On Fri, Sep 13, 2019 at 10:28:07PM +0300, Daniel Baluta wrote:
> The SAI transmitter and receiver can be configured to operate with
> synchronous bit clock and frame sync.
> 
> When Tx is synchronous with receiver RCSR.RE should be set in playback
> to enable the receiver which provides bit clock and frame sync.
> 
> When Rx is synchronous with transmitter TCSR.TE should be set in record
> to enable the transmitter which provides bit clock and frame sync.

I don't quite get what this patch fixes....can you explain?

> @@ -539,8 +539,8 @@ static int fsl_sai_trigger(struct snd_pcm_substream *substream, int cmd,
>  			   sai->synchronous[RX] ? FSL_SAI_CR2_SYNC : 0);
>  
>  	/*
> -	 * It is recommended that the transmitter is the last enabled
> -	 * and the first disabled.

This is copied from iMX6SX Reference Manual, IIRC...And I just
took a look at iMX8DXP/QXP RM: it has the exact same statement
in "16.16.3.3.1 Synchronous mode" section.

> +	 * it is recommended that the asynchronous block to be the last enabled
> +	 * and the first disabled

So... why are we changing to this? Any update/explain?

Thank you
_______________________________________________
Alsa-devel mailing list
Alsa-devel@alsa-project.org
https://mailman.alsa-project.org/mailman/listinfo/alsa-devel