From: Gabriele Mazzotta <gabriele.mzt@gmail.com>
To: Takashi Iwai <tiwai@suse.de>
Cc: Raymond Yau <superquad.vortex2@gmail.com>,
ALSA Development Mailing List <alsa-devel@alsa-project.org>
Subject: Re: Pop noise on startup when headphones are plugged in (Dell XPS13 9333)
Date: Sat, 25 Apr 2015 13:51:33 +0200 [thread overview]
Message-ID: <2264204.W7vnUSq2WO@xps13> (raw)
In-Reply-To: <s5h1tj9o7z2.wl-tiwai@suse.de>
On Friday 24 April 2015 17:34:57 Takashi Iwai wrote:
> At Fri, 24 Apr 2015 17:14:24 +0200,
> Gabriele Mazzotta wrote:
> >
> > 2015-04-24 8:13 GMT+02:00 Takashi Iwai <tiwai@suse.de>:
> > > At Thu, 23 Apr 2015 21:12:50 +0200,
> > > Gabriele Mazzotta wrote:
> > >>
> > >> On Sunday 19 April 2015 19:26:58 Gabriele Mazzotta wrote:
> > >> > Hi,
> > >> >
> > >> > I've recently found that commit a551d91473 ("ALSA: hda - Use regmap for
> > >> > command verb caches, too") is somehow causing a pop noise on startup
> > >> > when headphones are plugged in, but I couldn't figure out the exact
> > >> > cause. Was this observed on other systems (mine is a Dell XPS13 9333,
> > >> > Realtek ALC3661)? Does anyone have any idea of what the cause might be?
> > >>
> > >> Hi,
> > >>
> > >> I don't know why a551d91473 caused the issue, but I found the real
> > >> cause of problem.
> > >>
> > >> On init, create_input_ctls() sets the vref of nid 0x19 to 80 (as
> > >> returned by snd_hda_get_default_vref()), but it should be set to HIZ.
> > >> This is not so different from the issue addressed by f38663ab5c
> > >> ("ALSA: hda - Set internal mic as default input source on Dell XPS 13 9333").
> > >>
> > >> I made a patch to prevent this from happening.
> > >>
> > >> Setting the vref is not necessary since alc_update_headset_mode() will
> > >> take care of it.
> > >>
> > >> Should I maybe add a new flag instead of using suppress_hp_mic_detect?
> > >
> > > Yeah, that's better. Although the flag is currently unused, it's
> > > provided for a different purpose (to skip the headphone mic detection;
> > > which is different from "headset" mic).
> > >
> > > I wonder, though, whether the patch below improves anything.
> > > A similar patch was in the development series in the past, but I had
> > > to drop it because it caused behavior error. But now I tried again,
> > > and it seems working.
> > >
> > >
> > > Takashi
> >
> > The patch did no harm, but didn't solve the problem.
>
> OK, so the problem doesn't seem relevant with the runtime PM, which
> was the usual suspect.
>
> My patch should reduce the actual verb writes, so it would be nice to
> have even if it doesn't fix your problem. But maybe I'll postpone it
> as a 4.2 material.
>
>
> thanks,
>
> Takashi
Hi,
I think this the patch here below is simpler than the other I sent.
snd_hda_get_default_vref() guesses the vref input pins. We know that
some of these are for headphones/headset mics, so we could set the
vref to HIZ for these.
Are there systems that would misbehave with this change?
Gabriele
---
diff --git a/sound/pci/hda/hda_generic.c b/sound/pci/hda/hda_generic.c
index 3d2597b..081db8b 100644
--- a/sound/pci/hda/hda_generic.c
+++ b/sound/pci/hda/hda_generic.c
@@ -3257,7 +3257,9 @@ static int create_input_ctls(struct hda_codec *codec)
continue;
val = PIN_IN;
- if (cfg->inputs[i].type == AUTO_PIN_MIC)
+ if (cfg->inputs[i].type == AUTO_PIN_MIC &&
+ !cfg->inputs[i].is_headset_mic &&
+ !cfg->inputs[i].is_headphone_mic)
val |= snd_hda_get_default_vref(codec, pin);
if (pin != spec->hp_mic_pin)
set_pin_target(codec, pin, val, false);
next prev parent reply other threads:[~2015-04-25 11:51 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-04-19 17:26 Pop noise on startup when headphones are plugged in (Dell XPS13 9333) Gabriele Mazzotta
2015-04-20 5:58 ` Takashi Iwai
2015-04-20 7:18 ` Takashi Iwai
2015-04-20 19:51 ` Gabriele Mazzotta
2015-04-20 19:49 ` Gabriele Mazzotta
2015-04-21 2:13 ` Raymond Yau
2015-04-21 9:50 ` Gabriele Mazzotta
2015-04-21 9:58 ` Gabriele Mazzotta
2015-04-21 10:04 ` Takashi Iwai
2015-04-23 19:12 ` Gabriele Mazzotta
2015-04-24 6:13 ` Takashi Iwai
2015-04-24 15:14 ` Gabriele Mazzotta
2015-04-24 15:34 ` Takashi Iwai
2015-04-25 11:51 ` Gabriele Mazzotta [this message]
2015-04-25 13:57 ` Gabriele Mazzotta
2015-04-26 16:26 ` Takashi Iwai
2015-04-26 17:05 ` Gabriele Mazzotta
2015-04-27 8:49 ` Takashi Iwai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2264204.W7vnUSq2WO@xps13 \
--to=gabriele.mzt@gmail.com \
--cc=alsa-devel@alsa-project.org \
--cc=superquad.vortex2@gmail.com \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox