From: Gabriele Mazzotta <gabriele.mzt@gmail.com>
To: Takashi Iwai <tiwai@suse.de>
Cc: Raymond Yau <superquad.vortex2@gmail.com>,
ALSA Development Mailing List <alsa-devel@alsa-project.org>
Subject: Re: Pop noise on startup when headphones are plugged in (Dell XPS13 9333)
Date: Sun, 26 Apr 2015 19:05:18 +0200 [thread overview]
Message-ID: <2856179.MdfUFTz22r@xps13> (raw)
In-Reply-To: <s5hpp6qhn3g.wl-tiwai@suse.de>
On Sunday 26 April 2015 18:26:59 Takashi Iwai wrote:
> At Sat, 25 Apr 2015 15:57:15 +0200,
> Gabriele Mazzotta wrote:
> >
> > On Saturday 25 April 2015 13:51:33 Gabriele Mazzotta wrote:
> > > Hi,
> > >
> > > I think this the patch here below is simpler than the other I sent.
> > > snd_hda_get_default_vref() guesses the vref input pins. We know that
> > > some of these are for headphones/headset mics, so we could set the
> > > vref to HIZ for these.
> > >
> > > Are there systems that would misbehave with this change?
> > >
> > > Gabriele
> > >
> > > ---
> > > diff --git a/sound/pci/hda/hda_generic.c b/sound/pci/hda/hda_generic.c
> > > index 3d2597b..081db8b 100644
> > > --- a/sound/pci/hda/hda_generic.c
> > > +++ b/sound/pci/hda/hda_generic.c
> > > @@ -3257,7 +3257,9 @@ static int create_input_ctls(struct hda_codec *codec)
> > > continue;
> > >
> > > val = PIN_IN;
> > > - if (cfg->inputs[i].type == AUTO_PIN_MIC)
> > > + if (cfg->inputs[i].type == AUTO_PIN_MIC &&
> > > + !cfg->inputs[i].is_headset_mic &&
> > > + !cfg->inputs[i].is_headphone_mic)
> > > val |= snd_hda_get_default_vref(codec, pin);
> > > if (pin != spec->hp_mic_pin)
> > > set_pin_target(codec, pin, val, false);
> >
> > Sorry, I think I misunderstood the meaning of the two flags and they
> > can't be used like that.
>
> Yeah, it's a slight abuse.
>
> How about a patch like below? This doesn't add any flag but it sets
> the default pin target value explicitly by the driver beforehand, and
> let the generic parser setting up only when uninitialized.
It's working perfectly, thanks.
Gabriele
> Takashi
>
> ---
> diff --git a/sound/pci/hda/hda_generic.c b/sound/pci/hda/hda_generic.c
> index 3d2597b7037b..788f969b1a68 100644
> --- a/sound/pci/hda/hda_generic.c
> +++ b/sound/pci/hda/hda_generic.c
> @@ -3259,7 +3259,8 @@ static int create_input_ctls(struct hda_codec *codec)
> val = PIN_IN;
> if (cfg->inputs[i].type == AUTO_PIN_MIC)
> val |= snd_hda_get_default_vref(codec, pin);
> - if (pin != spec->hp_mic_pin)
> + if (pin != spec->hp_mic_pin &&
> + !snd_hda_codec_get_pin_target(codec, pin))
> set_pin_target(codec, pin, val, false);
>
> if (mixer) {
> diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
> index 06199e4e930f..bd661ca62092 100644
> --- a/sound/pci/hda/patch_realtek.c
> +++ b/sound/pci/hda/patch_realtek.c
> @@ -4190,11 +4190,15 @@ static void alc_shutup_dell_xps13(struct hda_codec *codec)
> static void alc_fixup_dell_xps13(struct hda_codec *codec,
> const struct hda_fixup *fix, int action)
> {
> - if (action == HDA_FIXUP_ACT_PROBE) {
> - struct alc_spec *spec = codec->spec;
> - struct hda_input_mux *imux = &spec->gen.input_mux;
> - int i;
> + struct alc_spec *spec = codec->spec;
> + struct hda_input_mux *imux = &spec->gen.input_mux;
> + int i;
>
> + switch (action) {
> + case HDA_FIXUP_ACT_PRE_PROBE:
> + snd_hda_codec_set_pin_target(codec, 0x19, PIN_VREFHIZ);
> + break;
> + case HDA_FIXUP_ACT_PROBE:
> spec->shutup = alc_shutup_dell_xps13;
>
> /* Make the internal mic the default input source. */
> @@ -4204,6 +4208,7 @@ static void alc_fixup_dell_xps13(struct hda_codec *codec,
> break;
> }
> }
> + break;
> }
> }
>
next prev parent reply other threads:[~2015-04-26 17:05 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-04-19 17:26 Pop noise on startup when headphones are plugged in (Dell XPS13 9333) Gabriele Mazzotta
2015-04-20 5:58 ` Takashi Iwai
2015-04-20 7:18 ` Takashi Iwai
2015-04-20 19:51 ` Gabriele Mazzotta
2015-04-20 19:49 ` Gabriele Mazzotta
2015-04-21 2:13 ` Raymond Yau
2015-04-21 9:50 ` Gabriele Mazzotta
2015-04-21 9:58 ` Gabriele Mazzotta
2015-04-21 10:04 ` Takashi Iwai
2015-04-23 19:12 ` Gabriele Mazzotta
2015-04-24 6:13 ` Takashi Iwai
2015-04-24 15:14 ` Gabriele Mazzotta
2015-04-24 15:34 ` Takashi Iwai
2015-04-25 11:51 ` Gabriele Mazzotta
2015-04-25 13:57 ` Gabriele Mazzotta
2015-04-26 16:26 ` Takashi Iwai
2015-04-26 17:05 ` Gabriele Mazzotta [this message]
2015-04-27 8:49 ` Takashi Iwai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=2856179.MdfUFTz22r@xps13 \
--to=gabriele.mzt@gmail.com \
--cc=alsa-devel@alsa-project.org \
--cc=superquad.vortex2@gmail.com \
--cc=tiwai@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox