From: Takashi Iwai <tiwai@suse.de>
To: Gabriele Mazzotta <gabriele.mzt@gmail.com>
Cc: Raymond Yau <superquad.vortex2@gmail.com>,
ALSA Development Mailing List <alsa-devel@alsa-project.org>
Subject: Re: Pop noise on startup when headphones are plugged in (Dell XPS13 9333)
Date: Sun, 26 Apr 2015 18:26:59 +0200 [thread overview]
Message-ID: <s5hpp6qhn3g.wl-tiwai@suse.de> (raw)
In-Reply-To: <1993280.RJlmSdruKz@xps13>
At Sat, 25 Apr 2015 15:57:15 +0200,
Gabriele Mazzotta wrote:
>
> On Saturday 25 April 2015 13:51:33 Gabriele Mazzotta wrote:
> > Hi,
> >
> > I think this the patch here below is simpler than the other I sent.
> > snd_hda_get_default_vref() guesses the vref input pins. We know that
> > some of these are for headphones/headset mics, so we could set the
> > vref to HIZ for these.
> >
> > Are there systems that would misbehave with this change?
> >
> > Gabriele
> >
> > ---
> > diff --git a/sound/pci/hda/hda_generic.c b/sound/pci/hda/hda_generic.c
> > index 3d2597b..081db8b 100644
> > --- a/sound/pci/hda/hda_generic.c
> > +++ b/sound/pci/hda/hda_generic.c
> > @@ -3257,7 +3257,9 @@ static int create_input_ctls(struct hda_codec *codec)
> > continue;
> >
> > val = PIN_IN;
> > - if (cfg->inputs[i].type == AUTO_PIN_MIC)
> > + if (cfg->inputs[i].type == AUTO_PIN_MIC &&
> > + !cfg->inputs[i].is_headset_mic &&
> > + !cfg->inputs[i].is_headphone_mic)
> > val |= snd_hda_get_default_vref(codec, pin);
> > if (pin != spec->hp_mic_pin)
> > set_pin_target(codec, pin, val, false);
>
> Sorry, I think I misunderstood the meaning of the two flags and they
> can't be used like that.
Yeah, it's a slight abuse.
How about a patch like below? This doesn't add any flag but it sets
the default pin target value explicitly by the driver beforehand, and
let the generic parser setting up only when uninitialized.
Takashi
---
diff --git a/sound/pci/hda/hda_generic.c b/sound/pci/hda/hda_generic.c
index 3d2597b7037b..788f969b1a68 100644
--- a/sound/pci/hda/hda_generic.c
+++ b/sound/pci/hda/hda_generic.c
@@ -3259,7 +3259,8 @@ static int create_input_ctls(struct hda_codec *codec)
val = PIN_IN;
if (cfg->inputs[i].type == AUTO_PIN_MIC)
val |= snd_hda_get_default_vref(codec, pin);
- if (pin != spec->hp_mic_pin)
+ if (pin != spec->hp_mic_pin &&
+ !snd_hda_codec_get_pin_target(codec, pin))
set_pin_target(codec, pin, val, false);
if (mixer) {
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 06199e4e930f..bd661ca62092 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -4190,11 +4190,15 @@ static void alc_shutup_dell_xps13(struct hda_codec *codec)
static void alc_fixup_dell_xps13(struct hda_codec *codec,
const struct hda_fixup *fix, int action)
{
- if (action == HDA_FIXUP_ACT_PROBE) {
- struct alc_spec *spec = codec->spec;
- struct hda_input_mux *imux = &spec->gen.input_mux;
- int i;
+ struct alc_spec *spec = codec->spec;
+ struct hda_input_mux *imux = &spec->gen.input_mux;
+ int i;
+ switch (action) {
+ case HDA_FIXUP_ACT_PRE_PROBE:
+ snd_hda_codec_set_pin_target(codec, 0x19, PIN_VREFHIZ);
+ break;
+ case HDA_FIXUP_ACT_PROBE:
spec->shutup = alc_shutup_dell_xps13;
/* Make the internal mic the default input source. */
@@ -4204,6 +4208,7 @@ static void alc_fixup_dell_xps13(struct hda_codec *codec,
break;
}
}
+ break;
}
}
next prev parent reply other threads:[~2015-04-26 16:27 UTC|newest]
Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-04-19 17:26 Pop noise on startup when headphones are plugged in (Dell XPS13 9333) Gabriele Mazzotta
2015-04-20 5:58 ` Takashi Iwai
2015-04-20 7:18 ` Takashi Iwai
2015-04-20 19:51 ` Gabriele Mazzotta
2015-04-20 19:49 ` Gabriele Mazzotta
2015-04-21 2:13 ` Raymond Yau
2015-04-21 9:50 ` Gabriele Mazzotta
2015-04-21 9:58 ` Gabriele Mazzotta
2015-04-21 10:04 ` Takashi Iwai
2015-04-23 19:12 ` Gabriele Mazzotta
2015-04-24 6:13 ` Takashi Iwai
2015-04-24 15:14 ` Gabriele Mazzotta
2015-04-24 15:34 ` Takashi Iwai
2015-04-25 11:51 ` Gabriele Mazzotta
2015-04-25 13:57 ` Gabriele Mazzotta
2015-04-26 16:26 ` Takashi Iwai [this message]
2015-04-26 17:05 ` Gabriele Mazzotta
2015-04-27 8:49 ` Takashi Iwai
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=s5hpp6qhn3g.wl-tiwai@suse.de \
--to=tiwai@suse.de \
--cc=alsa-devel@alsa-project.org \
--cc=gabriele.mzt@gmail.com \
--cc=superquad.vortex2@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox